Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 222 °C | 432 °F | ASTM D789 |
NYCOA 446 PA 6 UL-94 V-2 rated for flammability extrusion grade for rod, sheet and filmInformation provided by NYCOA, Inc. |
|||
Melting Point | 222 °C | 432 °F | STN EN 11357-1 |
Plastcom SLOVAMID® 6 NG1 GF 30 HLS PA6 reinforced with glass fiber, UV stabilized, hydrolysis resistant PA 6 for injection molding, reinforced with 30% glass fiber, for moldings used in the automotive, weather and UV stabilized. Determined for using in outside automotive applications like door handle,.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
Lanxess Durethan® B 30 S 000000 Nylon 6 PA 6, injection molding-grade, non-reinforced, easy-flow, easy-release, rapid solidification |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1, -3 |
Lanxess Durethan® B 30 S F30 000000 Nylon 6, Flame Retardant PA 6, non-reinforced, injection molding, flame retardantInformation provided by LANXESS. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1, -3 |
Lanxess Durethan® B 31 FCS 000000 Nylon 6, Film Grade PA 6, non-reinforced, extrusion, low viscosity, slip agentInformation provided by LANXESS. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
Lanxess Durethan® BC 30 000000 Nylon 6 PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
Lanxess Durethan® BC 304 H3.0 000000 Nylon 6 PA 6, injection molding grade, non-reinforced, elastomer-modified, extremely high notched impact strength, including in the dry state and at low temperatures, also applicable for barrier layers in e.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
Lanxess Durethan® BG 30 X 000000 Nylon 6, 30% Glass Fiber PA 6, injection molding grade, 30% glass fibers/glass spheres, good surface, low warpage |
|||
Melting Point | 222 °C | 432 °F | 10 °C/min; ISO 11357-1,-3 |
Lanxess Durethan® BKV 130 H3.0 DUS008 000000 Nylon 6, 30% Glass Fiber PA 6, glass fiber, injection molding, impact modified, heat-aged stabilizedInformation provided by LANXESS. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1, -3 |
Lanxess Durethan® BKV 40H2.0 EF 900116 Nylon 6, Glass Fiber Reinforced PA 6, 40% glass fibers, injection molding, improved flowability, heat-aging stabilizedInformation provided by LANXESS. |
|||
Melting Point | 222 °C | 432 °F | ISO 11357 |
Solvay TECHNYL® C 218 V 30 PA6, 30% glass fiber, DRY Description: TECHNYL® C 218 V30 is a polyamide 6, heat stabilized, reinforced with 30% of glass fiber, for injection molding. This product is available in black color.Benefits: The product offers.. |
|||
Melting Point | 222 °C | 432 °F | ISO 11357 |
Solvay TECHNYL® C 442 Black V PA6, DRY Description: Unreinforced polyamide PA6, high viscosity, with high flexibility and very high impact resistance even at low temperature, for extrusion.Available in: Europe Product Applications: It ha.. |
|||
Melting Point | 222 °C | 432 °F | ISO 11357 |
Solvay TECHNYLSTARâ„¢ S 216 V30 PA6, 30% glass filled, DRY Description: TECHNYL STAR TM Polyamide, reinforced with 30% of glass fiber, for injection molding. Characterized by a high fluidity of the melt.Available in: Asia Pacific, Europe and North AmericaPr.. |
|||
Melting Point | 222 °C | 432 °F | ISO 11357 |
Solvay TECHNYLSTARâ„¢ S 218 V35 PA6, 35% glass filled, DRY Description: TECHNYL STAR Polyamide, reinforced with 35% of glass fiber, heat stabilized, for injection molding. Characterized by a high fluidity of the melt. Available in: Europe and North America .. |
|||
Melting Point | 222 °C | 432 °F | ISO 11357 |
Solvay TECHNYLSTARâ„¢ S 60G1 V30 PA6, 30% glass filled, DRY Description: TECHNYLSTARâ„¢ S 60G1 V30 is a reinforced 30% GF organophosphorous flame retarded grade based on a patented high flow polyamide 6 resin (TechnylStar). This product is heat stabilized.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® 2SV-30H black 9992 PA610-GF30 Product Description: GRILAMID XE 3976 black 9992 is a 30% glass fiber reinforced, heat stabilized polyamide 610 injection molding grade. This product is to a large extent based on renewable raw mate.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® B 70 GFE 15 H PA6-GF15 Product description: Grilon B 70 GFE 15 H is a impact modified, heat stabilized PA 6 injection molding grade with 15% glass fiber reinforcement. Grilon B 70 GFE 15 H has the following important prop.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® BG-30 FC PA6-GF30 Product description: Grilon BG-30 FC is a heat stabilised PA6 injection moulding grade with 30% glass fibres. Grilon BG-30 FC has the following important properties: High stiffnessExcellent surface .. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® BGZ-30/2 PA6-GF30 Product description: Grilon BGZ-30/2 is a heat stabilized and impact modified PA6 injection molding grade with 30% glass fibers. Grilon BGZ-30/2 has the following important properties: Good impact s.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® BS PA6 Product description: Grilon BS is an unreinforced, heat stabilized standard PA6 injection molding grade with normal melt viscosity. Grilon BS has the following important properties: Good flow behavi.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® EB 50 H PA6 Product description: Grilon EB 50 H is a high viscosity, unreinforced, heat stabilized PA6 extrusion blow mounding grade. Grilon EB 50 H has the following important properties: High melt strengthImp.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® FG 47 NL nat 6028 PA6 Product description: Grilon FG 47 NL natural 6028 is a modified, high viscosity Polyamide 6, which contains also slip and nucleating agents. Grilon FG 47 NL natural 6028 shows following improvements.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® XE 5026 (BG-30 H) PA6-GF30 Product description: Grilon B XE 5026 (BG-30 H) black 9922 is a high heat stabilized, 30% glass fiber reinforced PA6- Injection molding grade with modified flowability. Grilon B XE 5026 (BG-30 H) bl.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® BG-50 PA6-GF50 Product description: Grilon BG-50 is a heat stabilized, normal viscosity PA6 injection molding grade with 50% glass fibers. Grilon BG-50 has the following important properties: High stiffnessGood su.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® BGM-65 X V0 PA6-(GF+MD)65 Product description: Grilon BGM-65 X V0 is a flame retardant mineral and glass fiber reinforced PA6 injection molding grade. Grilon BGM-65 X V0 has the following important properties: Halogen and ph.. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® EB 50 H DZ PA6 Product description: Grilon EB 50 H DZ is a high viscosity, unreinforced, heat stabilized, impact modified PA6 extrusion blow molding grade. Grilon EB 50 H DZ has the following important properties:.. |
|||
Melting Point | 222 °C | 432 °F | ASTM D789 |
Adell BR-13 Nylon 6, 15% Glass Reinforced Data provided by Adell Plastics, Inc. |
|||
Melting Point | 222 °C | 432 °F | ASTM D789 |
Adell BR-18 Nylon 6, 40% Glass Reinforced Data provided by Adell Plastics, Inc. |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® BZ 1 PA6 Information provided by EMS Grivory |
|||
Melting Point | 222 °C | 432 °F | 10°C/min; ISO 11357-1/-3 |
EMS-Grivory Grivory® F 50 nat 6368 PA6 Product description: Grilon F 50 natural 6368 is a modified, very high viscous Polyamide 6 for extrusion processes: Very high melt strengthGood chemical resistanceGood gas-barrierGood mechanical pro.. |