- HOME
- POLYMER SEARCH
- Polymer Property : Minimum Service Temperature, Air = -51.1 °C
Polymer Property : Minimum Service Temperature, Air = -51.1 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Palm Labs Adhesives Turbo Anti-Seize Nickel Paste TURBO ANTI-SEIZE – NICKEL is a gray, viscous metallic paste which may be used on all bolts, studs, value shafts, value assemblies, transmission shafts, and other types of assembly work where protec.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Resinlab® CYNERGY CA6015 Adhesive Description: The CYNERGY 6000 SERIES are for use in demanding applications where very fast cure speeds are required. These are single component solvent free materials manufactured in a wide variety.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Dielectric Polymers NT-2822 Ultra Tack Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of silicone coated paper and film at zero wet out.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Dielectric Polymers NT-5521-2 Photo Processing Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing photographic film to leader card during film proc.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Dielectric Polymers NT-7411-5 Fume Mask
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Good conformabilityChemical resistantApplications: For protecting large areas of printed circuit boards from splash and fumes duri.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | Approx. Cold test |
| Lubriplate SFL-0 Aluminum Complex Synthetic Food Machinery Grade Grease This series provides an exceptionally wide operating temperature range, high shear stability, excellent water resistance, and load carrying properties. For use in freezers and other cold temperature.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | Approx. Cold test |
| Lubriplate SFL-00 Aluminum Complex Synthetic Food Machinery Grade Grease This series provides an exceptionally wide operating temperature range, high shear stability, excellent water resistance, and load carrying properties. For use in freezers and other cold temperature.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Saint-Gobain COHRlastic® F-12 Silicone Foam Description: Low-density, flame-retardant COHRlastic silicone foam yard goods provide outstanding performance for industries ranging from aviation and mass transit to automotive, electronics, constr.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP112 Low Viscosity Structural Epoxy Adhesive System Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical and.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP24 Fast Curing Two Component Epoxy System Master Bond Polymer Adhesive EP24 is a fast curing two component epoxy adhesive for general purpose bonding, sealing, and coating formulated to cure at room temperature with a one-to-one mix ratio, .. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP30-3 High Temperature Resistant Two Component Epoxy Master Bond Polymer System EP30-3 is a two component, low viscosity epoxy featuring optical clarity and high temperature serviceability up to 450°F along with superior chemical resistance. EP30-3 h.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP41S-1HT Solvent Resistant Adhesive, Sealant and Coating Description: Master Bond EP41S-1HT is a two component epoxy resin system for high performance bonding, sealing, coating and encapsulating. It has a 100 to 30 mix ratio by weight and is formulated to.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP76M Nickel Filled Electrically Conductive Epoxy System Master Bond Polymer System EP76M is a two component, nickel filled, electrically conductive adhesive for high performance bonding, sealing, and coating formulated to cure at room temperature or more.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond LED401LV One Component, Moderate Viscosity LED Curable System Master Bond LED401LV is a very special, one part LED type system that will cure when exposed to a light source emitting 405 nm wavelength and where the presence of any UV light is minimal or inciden.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP125 High Temperature Resistant, Toughened Epoxy System Master Bond Polymer System EP125 is a two component toughened epoxy resin for prolonged service above 500°F with truly outstanding chemical resistance. High strength bonds serviceable up to 600°F .. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP31 High Shear and Peel Strength Room Temperature Curing Epoxy Master Bond Polymer System EP31 is a two component room temperature curing epoxy for high performance structural bonding applications featuring lap shear strengths exceeding 4600 psi. In addition, u.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP41S Fast Curing Epoxy Features Chemical Resistance Description: Master Bond EP41S is a two component epoxy resin compound for durable, high performance, tough, high strength coatings, liners and sealants with outstanding resistance to organic solven.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond UV15-7LRI One Component, Optically Clear UV Curable System Master Bond Polymer System UV15-7LRI is a one component, optically clear, non-yellowing UV curable polymer system for high performance adhesives, sealants and coatings. When exposed to a source of U.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon 25188T017 Silicone Rubber/Laminated ETFE Film Liner: 3 mil PTFE coated fiberglass; Side 1: uncured silicone rubber; Substrate: laminated ETFE film, treated for adhesion |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon 920-05Rxx-P1 0.020" (0.508 mm) Self-Fusing Silicone Tape Design/Construction:Cross Section Type: RectangularWidth, inches: 0.5Arlon Rectangular Tape: Rectangular tape is of uniform thickness and is ideal for applications where a smooth, even layer of tape.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon 920-20Bxx-P1 0.020" (0.508 mm) Self-Fusing Silicone Tape Design/Construction:Cross Section Type: RectangularWidth, inches: 2Arlon Rectangular Tape: Rectangular tape is of uniform thickness and is ideal for applications where a smooth, even layer of tape i.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon 940-15R##-P0 0.040" (1.02 mm) Cured Self-fusing Silicone Tape Design/Construction: Interleave: Polyethylene Rubber: Cured Self-fusing Silicone Rubber Cross Section Type: 1.5” Wide Rectangular 1.5 inch wide, 40 mil thick, Red, Rectangular cross-section, Self-f.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon LW201B##-P2 0.020" (0.508 mm) Self-Fusing Silicone Tape (Triangular, Unsupported) Description: 1 inch wide, 20 mil thick, Black, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates roll length.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon LW201Xxx-P1 0.020" (0.508 mm) Self-Fusing Silicone Tape (Triangular, Unsupported) with Poly Interleave Design/Construction:Triangular Cross Section Fusible TapeArlon LevelWrap® Tape: LevelWrap® has tapered edges and a colored line along its apes. The purpose of the line is to act as a guide for sub.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon LW202R##-P0 0.020" (0.508 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported) Description: 2 inch wide, 20 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths and the ## in the product number indicates roll length i.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon R35232B085 0.085" (2.16 mm) Fully Cured Silicone Rubber Description: Fully cured, unsupported, static dissipation siliconeDesign/Construction:Liner: Polyethylene Product: Fully Cured Silicone RubberAppearance: Black cured siliconeThis data represents typ.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon RBLW401X##-P1 0.040" (1.02 mm) Cured Self-Fusing Silicone Rubber Description: 1 inch wide, 40 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths. ## in the product number indicates roll length in yards.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Arlon R36812T010 0.010" Cured Silicone Rubber with Laminated ETFE Film Substrate Design/Construction:Liner: N/ASide 1: Cured Silicone RubberSubstrate: Laminated ETFE FilmChemical Compatibility: Alkalis, Organic and Inorganic acids, Amines, Epoxies, Aromatic compounds, Chlorin.. |
|||
| Minimum Service Temperature, Air | -51.1 °C | -60.0 °F | |
| Master Bond EP3HTSMed Silver Filled, Medical Grade Epoxy Description: Master Bond EP3HTSMed is a one component, silver filled, electrically conductive epoxy system featuring high shear strength and good temperature resistance along with a fast cure schedu.. |
|||
Copyright © lookpolymers.com All Rights Reserved