Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 12.3 kN/m | 70.0 pli | ASTM D624 |
Noble Polymers Ecobarrier™ 1512 Thermoplastic Olefin (TPO) Ecobarrier is a TPO (thermoplastic olefin) produced by Noble Polymers based on olefin/elastomer compounding. Ecobarrier is primarily used as a sound barrier material in low heat applications.Informa.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | ASTM D624 |
Parker Chomerics Waveguide Gaskets 877 Conductive Silicone Elastomer Gasket Description: TECKNIT® WAVEGUIDE GASKETS are made from a silicone elastomer filled with silver-plated particles designed to achieve maximum electrical conductivity.Application Information: TECKNIT W.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | ASTM D624 |
Multibase Multi-Flex® A 1540 Natural TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodSoftUV Resistance, Go.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | ASTM D624 |
STAR Thermoplastic Alloys & Rubbers StarFlex® P 7330-9000 TPE Product Description: StarFlex P 7330-9000 is an easy processing TPE designed for injection molding Features:Soft TouchRubbery FeelGood WeatherabilityFDA and medical grades availableProcessing Method.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Fill/Transverse direction |
Saint-Gobain Chemlam® 4 Value Industrial Laminate Description: The Chemlam® series is the Chemfab® value line of industrial laminates. Chemlam® composites features uniform thickness, multi-layer cast PTFE films laminated to fiber glass rei.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Fill/Transverse direction |
Saint-Gobain Chemlam® Silver 4 Wear Resistant Industrial Laminate Description: The Chemlam® Silver series is the wear resistant line of Chemfab® industrial laminates. Chemlam® Silver composites feature uniform thickness, multi-layer cast PTFE films lamina.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B; DCBP Cure |
Shin-Etsu Silicones X-65-130U Electrically Conductive Silicone Elastomer ShinEtsu X65130 U is a black semiconductive silicone compound designed to give very low volume resistivity for molding and extruding. Product Features: Good processability.Lower than average volume .. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Initial Tear Strength |
Saint-Gobain CHR® C661 Copper Foil Backing Acrylic Adhesive Pressure Sensitive Tape Description: Aluminum and copper foil tapes offer high conformability, conductivity, and reflectivity at elevated temperatures. Aluminum is available with a fiberglass laminate for applications requ.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Tensile Strength (Warp) |
Saint-Gobain Chemfab® 3 Anti-Static PTFE-Coated Glass Description: Chemfab® Anti-static Series is a high quality PTFE-coated glass fabric that can be used for release sheets, belting, or other applications requiring the dissipation of static electri.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Tensile Strength (Warp) |
Saint-Gobain Chemfab® 3 Porous PTFE-Coated Glass Description: Chemfab® Porous Series products are lightweight, highly porous materials commonly used as a release (non-stick) layer for composite curing, molding, and other processes that "off-gas.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Tensile Strength (Warp) |
Saint-Gobain Chemfab® 3 Premium PTFE-Coated Glass Description: Chemfab® Premium Series combines a superior quality glass fabric with a high level of PTFE content. Description: Chemfab® Premium is an excellent multi-purpose fabric with a smoot.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Initial Tear Strength; ASTM D624 |
Saint-Gobain COHRlastic® 500 General Purpose Silicone Solid Rubber Description: COHRlastic® solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durome.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Tensile Strength (Warp) |
Saint-Gobain Chemfab® SlipGrip™ 3 PTFE/Silicone Coated Fiberglass Fabric Description: SlipGrip™ products are PTFE-coated fiberglass fabrics with silicone rubber on one face. This unique combination provides a "slippery" PTFE surface and a "grippy" silicone surface. .. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | ASTM D624 |
Teknor Apex UNIPRENE® 7010-45 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon 28751R015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave 1: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 1528 FiberglassSide 2: Uncured Silicone RubberInterleave 2: PolyethyleneAppearance: Red silicone gum o.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon 55590R030 0.030" (0.762 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone Rubber Substrate: Style 162 FiberglassThis data represents typical values for the production material. The data should not be us.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon 55759R028 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneLayer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: 162 Style Fiberglass This data represents typical values for the production ma.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B; Silicone Property; Arlon SQA-TMS-029 |
Arlon 99322B015 0.015" Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier Static dissipating siliconeDesign/Construction:Interleave: 0.0025" PolyethyleneSide 1: Cured Silicone RubberCarrier: 0.003" PTFE coated FiberglassRecommended Primer: Chemlock 607This data repres.. |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B; silicone property; ASTM D624 |
Arlon CP-375CR Silicone Rubber bulk compound |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | Die B; silicone property; ASTM D624 |
Arlon 51756R028 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber |
|||
Tear Strength | 12.3 kN/m | 70.0 pli | ASTM D624 |
STAR Thermoplastic Alloys & Rubbers StarFlex® P 7140-1000 TPE Product Description: StarFlex P 7140-1000 is an easy processing TPE designed for injection molding Features:Soft TouchRubbery FeelExcellent ColorabilityGood WeatherabilityFDA and medical grades avai.. |