Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 5.25 kN/m | 30.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL 1285 Conductive Elastomer Conductive Elastomer with Improved Corrosion Resistance. This conductive silicone elastomer features significantly improved corrosion resistance in salt spray environments over silver-plated copper-.. |
|||
Tear Strength | 5.25 kN/m | 30.0 pli | Base Material; ASTM D624 |
Parker Chomerics CHO-SEAL 1285R Reinforced Conductive Elastomer Seal These materials are fabric-reinforced, silver-plated-aluminum filled EMI seals for airframe shielding applications. These seal materials can also be used to maintain surface electrical continuity at.. |
|||
Tear Strength | 5.25 kN/m | 30.0 pli | |
Parker Chomerics CHO-SEAL 1485 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tear Strength | >= 5.26 kN/m | >= 30.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL® 2542 Non-Conductive Extruded Elastomer Specifications Chomerics manufactures a dual performance extruded gasket in one simple design. By a seam vulcanization process, CHO-SEAL or CHO-SIL conductive elastomers are extruded in parallel with non-conductiv.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | ASTM D624 |
Parker Chomerics Tecknit Consil®-A 895 Silver-Aluminum Filled Silicone Elastomer Description: CONSIL-A is a silicone or fluorosilicone elastomer filled with silver-plated aluminum particles designed to achieve maximum electrical conductivity. CONSIL-A provides high shielding eff.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | ASTM D624 |
Parker Chomerics Tecknit Consil®-N 891 Silver-Nickel Filled Silicone Elastomer Description: CONSIL-N is a silicone elastomer filled with silver-plated nickel particles and designed to provide high shielding effectiveness and corrosion resistance. CONSIL-N is available in sheet.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Die C; ASTM D624 |
Mearthane Durethaneâ„¢ S DS-720A Solid Polyurethane Elastomer MDI backbone: ether.Summary: Durethane S is a solid urethane elastomer. Formulations are individually compounded and tested to meet OEM requirements for durometer, tensile strength, tear strength, .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2042-5 Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2283-2 Extruded PTFE Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2285-2 Extruded PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2345-1 Polyimide Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® K102 Polyimide Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® K103 Polyimide Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2045-5 Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2253-2 High Modulus PTFE Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2254-2 High Modulus PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2255-2 High Modulus PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® K100 Polyimide Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® K250 Polyimide Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® K290ESD Polyimide Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | Initial Tear Strength |
Saint-Gobain CHR® TV Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 5.26 kN/m | 30.0 pli | |
Dow Corning 3112 BASE & 1 CATALYST General purpose silicone mold making rubber suited for the reproduction of objects with no deep undercuts or complex shapes. 3112 Base with 1 Catalyst is recommended for use with rigid polyurethane .. |