Polymer Property : Tear Strength = 22.0 kN/m Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tear Strength	22.0 kN/m	126 pli	Die B
Momentive Performance Materials Silplusâ„¢ 80 MP Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta..
Tear Strength	22.0 kN/m	126 pli	Die B
Momentive Performance Materials TSE 221-4U Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta..
Tear Strength	22.0 kN/m	126 pli	Die B
Momentive Performance Materials TUFELâ„¢ II 94205 Low Volatile Extrusion Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
Multibase Multi-FlexÂ® TPE A 5501 LC GREY Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
Tear Strength	22.0 kN/m	126 pli	Die C; Cross direction; ASTM D624
Teknor Apex SarlinkÂ® 4155 Thermoplastic Elastomer A highly engineered Thermoplastic Elastomer for use in demanding applications. SarlinkÂ® 4155 is a low hardness grade possessing exceptional tensile strength, superior compression set, chemical re..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
Teknor Apex SarlinkÂ® 4370 Thermoplastic Elastomer A highly engineered thermoplastic elastomer for use in demanding applications. SarlinkÂ® 4370 is a flame retardant, soft hardness grade exhibiting exceptional chemical resistance, compression set..
Tear Strength	22.0 kN/m	126 pli	Die C; Cross direction; ASTM D624
Teknor Apex SarlinkÂ® 4455 Thermoplastic Elastomer A NSF certified, highly engineered Thermoplastic Elastomer for use in demanding applications. SarlinkÂ® 4455 is a low hardness grade possessing exceptional tensile strength, superior compression s..
Tear Strength	22.0 kN/m	126 pli	Method C; ISO 34
ELASTO UK Dryflex® 3004-111 TPE, Modified Injection Molding Grade for Auto Interior Parts The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. VTC Dryflex® 3004-111 is specifically designe..
Tear Strength	22.0 kN/m	126 pli	Method C; ISO 34
ELASTO UK Dryflex® 3006-101 TPE, Modified Injection Molding Grade for Auto Interior Parts The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. VTC Dryflex® 3006-101 is specifically designe..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
ELASTO UK Dryflex® 500500S SEBS Based Material, Unfilled Qualities, 50A Hardness, Translucent The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
ELASTO UK Dryflex® 502500S SEBS Based Material, Unfilled Qualities, 50A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
ELASTO UK Dryflex® 660550S SEBS Based Material, Semi-Filled Qualities, 55A Hardness, Natural The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
ELASTO UK Dryflex® 660600S SEBS Based Material, Semi-Filled Qualities, 60A Hardness, Natural The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
ELASTO UK Dryflex® 662550S SEBS Based Material, Semi-Filled Qualities, 55A Hardness, Black The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Tear Strength	22.0 kN/m	126 pli	ASTM D624
ELASTO UK Dryflex® 662600S SEBS Based Material, Semi-Filled Qualities, 60A Hardness, Black The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Tear Strength	22.0 kN/m	126 pli	Parallel to flow; ISO 34-B
AlphaGary Evoprene™ LF 6152 Automotive Thermoplastic Elastomer Evoprene™ LF is a hydrogenated styrene block copolymer based thermoplastic elastomer created for the automotive industry. It is specially formulated to have very low fogging characteristics suitab..
Tear Strength	22.0 kN/m	126 pli
ACC MMAD25 Addition Cure 2-Part Molding Rubber Part of the Amber Chemical Group. Data provided by manufacturer.Characteristics: cures at room temperature, low viscosity, low shrinkage, high tear and tensile strengths. Applications: plaster casti..
Tear Strength	22.0 kN/m	126 pli
ACC QMSkin 30 Specialist Molding 2-Part Condensation Cure Part of the Amber Chemical Group. Data provided by manufacturer.
Tear Strength	22.0 - 104 kN/m	126 - 593 pli	Average value: 54.1 kN/m Grade Count:8
Overview of materials for PVC, Wire and Cable Grade This property data is a summary of similar materials in the MatWeb database for the category "PVC, Wire and Cable Grade". Each property range of values reported is minimum and maximum values of appr..