Polymer Property : Tear Strength = 17.5 kN/m Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tear Strength	17.5 kN/m	99.9 pli	ASTM D624
PolyOne Versaflex™ OM 1040X-1 Thermoplastic Elastomer (TPE) The Versaflex™ OM 1040X-1 is a medical compliant overmolding TPE with very good adhesion to PC or ABS-based plastics. - Good Surface Aesthetics - Rubbery Feel - Soft Touch - Very Good Bond to PC, A..
Tear Strength	17.5 kN/m	99.9 pli	ASTM D624
PolyOne Dynaflex™ G7930-1001-00 Thermoplastic Elastomer (TPE) Dynaflex™ G7930-1001-00 is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Non-Slip Grip - Overmold Adhesion..
Tear Strength	17.5 kN/m @Temperature 23.0 °C, Time 7200 sec	99.9 pli @Temperature 73.4 °F, Time 2.00 hour	ASTM D624
PolyOne Dynaflex™ G7930-9001-02 Thermoplastic Elastomer (TPE) Dynaflex™ G7930-9001-02 is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Non-Slip Grip - Overmold Adhesion..
Tear Strength	17.5 kN/m	99.9 pli	ASTM D624
PolyOne Dynaflex™ G7940-1 NSFG Thermoplastic Elastomer (TPE) Dynaflex™ G7940-1 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,..
Tear Strength	17.5 kN/m	99.9 pli	ASTM D624
PolyOne Dynaflex™ G7940-9 NSFG Thermoplastic Elastomer (TPE) Dynaflex™ G7940-9 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,..
Tear Strength	>= 17.5 kN/m	>= 100 pli	cured
ACC Stretch Effect QSI Quantum Silicones Stretch Effect 22 Durometer Addition Cure Translucent Moldmaking Material & Part of the Amber Chemical Group. Data provided by manufacturer.Characteristics: low viscosity, fast demold time, high elongation, excellent flexibility. Applications: special effects, skin replicat..
Tear Strength	17.5 kN/m	100 pli	ASTM D624
KratonÂ® G7705 GI-B (SEBS) Compound Description: Kraton G7705 GI-B is an easy processing, general purpose 44 Shore A hardness material designed for a wide variety of applications. It is supplied from North America in the physical form..
Tear Strength	17.5 kN/m	99.9 pli	ASTM D624
Multibase Multi-FlexÂ® TPE A 5402 BLK The burn rate is 0.7 in/min based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
Tear Strength	17.5 kN/m	100 pli	ASTM D624
Multibase Multi-FlexÂ® A 3540 TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodSoftUV Resistance, Go..
Tear Strength	17.5 kN/m	100 pli	ASTM D624
Multibase Multi-FlexÂ® A 4001 LC TPE Thermoplastic Elastomer Features: Chemical Resistance, GoodCompressive Strength, GoodHeat Resistance, MediumOzone ResistantThermal Stability, GoodForms:PelletsProcessing Methods:Injection MoldingExtrusion Information pro..
Tear Strength	17.5 kN/m	100 pli	ASTM D624
Multibase Multi-FlexÂ® A 4001 LCS Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Method:Injection Molding Information provided by Multibase
Tear Strength	17.5 kN/m	100 pli	Initial Tear Strength
Saint-Gobain CHRÂ® M787 Polyester Film Backing Natural Rubber Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa..
Tear Strength	17.5 kN/m	100 pli	Initial Tear Strength
Saint-Gobain CHRÂ® M855 Polyester Film Backing Natural Rubber Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa..
Tear Strength	17.5 kN/m	100 pli	Tensile Strength (Fill)
Saint-Gobain ChemfabÂ® 6 Anti-Static PTFE-Coated Glass Description: ChemfabÂ® Anti-static Series is a high quality PTFE-coated glass fabric that can be used for release sheets, belting, or other applications requiring the dissipation of static electri..
Tear Strength	17.5 kN/m	100 pli	Tensile Strength (Fill)
Saint-Gobain ChemfabÂ® 6 Primary PTFE-Coated Glass Description: ChemfabÂ® Primary Series is an economical PTFE-coated glass fabric fiber used for belting, gaskets, and release sheets. It is designed as a lower cost alternative to our Description: ..
Tear Strength	17.5 kN/m	100 pli	Trouser; ASTM D470
Lubrizol ESTANE® 58881 Ether Based Thermoplastic Polyurethane Features: Very high tensile strength, excellent low temperature flexibility, and superior abrasion and cut resistanceUses: Extrusion – Wire and cable, Hose and tube & General purposeAvailable in Am..
Tear Strength	17.5 kN/m	100 pli
Dow Corning SILASTIC® FL 40-9201 A&B KIT 40 shore A 100% fluorinated liquid silicone rubber. Designed for effective manufacturing of automotive parts that must wistand harsh environment, such as fuel contact under extreme temperatures.Info..
Tear Strength	17.5 kN/m	100 pli	Die C; ASTM D624
Teknor Apex APEX® 3050-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-Natural Color, OpaqueForms-PelletsProcessin..
Tear Strength	17.5 kN/m	100 pli	Tensile Strength (Fill)
Saint-Gobain Chemfab® 5 Porous PTFE-Coated Glass Description: Chemfab® Porous Series products are lightweight, highly porous materials commonly used as a release (non-stick) layer for composite curing, molding, and other processes that "off-gas."..
Tear Strength	17.5 kN/m	100 pli	Die C (graves), 20 in/min; ASTM D624
PolyOne Synprene® RT-4050 Thermoplastic Elastomer - SBC, Mineral Filled (discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerMineral FilledApplications:Multi-PurposeMarket:AutomotiveBuilding and ConstructionIndustrialConsumer GoodsProcessing Method:ExtrusionPolyOne..
Tear Strength	17.5 kN/m	99.9 pli	Die C, 510 mm/min; ASTM D624
PolyOne Elastamax™ XL-0153-24 Styrene Butadiene Block Copolymer (SBC) (discontinued **) A thermoplastic elastomer compound formulated for use in food contact applications. The physical properties listed above are typical values obtained on laboratory prepared samples and tested in acco..
Tear Strength	17.5 kN/m	100 pli	Tensile Strength (Fill)
Saint-Gobain Chemfab® 5 Premium PTFE-Coated Glass Description: Chemfab® Premium Series combines a superior quality glass fabric with a high level of PTFE content. Description: Chemfab® Premium is an excellent multi-purpose fabric with a smooth, h..