Polymer Property : Flexural Modulus = 160 ksi Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Flexural Modulus	1.10 GPa	160 ksi	STN EN ISO 178
Plastcom SLOVALEN PC 78 FRD 1 Polypropylene Copolymer, Halogen Flame Retardant, UV Stabilized FeaturesModified copolymer PP with the possibility of changing the MFI within the interval 5 - 20 g/10min. Stabilized against the UV-radiation by the UV stabilizer on the HALS basis. Retarded with..
Flexural Modulus	1.10 GPa	160 ksi	Tangent; ASTM D790
RheTech Products F4900-611UV Thermoplastic Polyolefin, UV Stabilized, XS9 Dark Neutral Metallic Applications: Exterior componentsBodyside moldingsStep padsInjection molding conditions reported in table.Information provided by RheTech Products.
Flexural Modulus	1.10 GPa	160 ksi	Tangent; ASTM D790
RheTech Products FT2202-732UV Thermoplastic Polyolefin, UV Stabilized, YGYA Black Applications: Box top railTail gate linerExterior trimInjection molding conditions reported in table.Information provided by RheTech Products.
Flexural Modulus	1.10 GPa	160 ksi	Tangent; ASTM D790
RheTech Products FT4900-772UV Thermoplastic Polyolefin, UV Stabilized, RXF Jet Black Applications: Exterior componentsBodyside moldingsStep padsInjection molding conditions reported in table.Information provided by RheTech Products.
Flexural Modulus	1.10 GPa	160 ksi	ISO 178
PolyOne OnFlex™ BIO 5170D-E0010 Thermoplastic Elastomer (TPE) OnFlex™ BIO 5100 series thermoplastic elastomer compounds are glass reinforced thermoplastic polyurethane compounds made from renewable natural sources. These compounds contain at least 20% renewab..
Flexural Modulus	1.10 GPa	160 ksi	Tangent; ASTM D790
RheTech Products P256-674UV Polypropylene Copolymer, UV Stabilized, 447B Fawn Applications: Interior trimElectrical housingsInjection molding conditions reported in table.Information provided by RheTech Products.
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
Network Polymers NPP 50-0158 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc.
Flexural Modulus	1.10 GPa @Temperature 23.0 °C	160 ksi @Temperature 73.4 °F	ISO 178
Polykemi AB POLYelast TPE 10012 R3 Thermoplastic Elastomer, PP/Elastomer, Mineral Reinforced Information provided by Polykemi AB
Flexural Modulus	>= 1.10 GPa	>= 160 ksi	ASTM D790
NIZHNEKAMSKNEFTEKHIM PP 8300K (EPT30R) Propylene and Ethylene Block Polymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
LyondellBasell AlathonÂ® L5040 High Density Polyethylene, Blow Molding/Extrusion Grade Alathon L5040 is able to incorporate high levels of post consumer recycle and retain excellent bottle physical properties. This resin provides high ESCR and processing stability. Typical application..
Flexural Modulus	1.10 GPa	160 ksi	Test 2
Aardvark Polymers AardalloyÂ® 3300 POM Alloy Rotational Molding Resin Aardalloy 3300 is an acetal alloy formulated for enhanced impact resistance and elongation.Aardalloy 3300 maintains the high degree of chemical resistance and low fuel permeation rates of unfilled a..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
LyondellBasell AlathonÂ® L5040TC High Density Polyethylene ApplicationsALATHON L 5040TC is a bimodal high density polyethylene copolymer natural resin designed for telecommunications conduits. L 5040TC offers an excellent balance of stiffness, toughness and..
Flexural Modulus	1.10 GPa	160 ksi	ISO 178
Suzhou Hipro Polymers HiprolonÂ® 400 NN Nylon, conditioned HiprolonÂ® 400 NN is a medium viscosity specialty polyamide. Features: low density, low water absorption, high dimension stability, high notched impact resistance in large temperature ranges, and..
Flexural Modulus	1.10 GPa	160 ksi	1.3 mm/min, tangent; ASTM D790
A. Schulman PP 1930L-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 1930L-01 is an impact grade of polypropylene for use in parts which require good impact and good appearance in light weight injection molded parts. Information provided b..
Flexural Modulus	1.10 GPa	160 ksi	At 2 mm/min; ISO 178
Borealis Daplen™ EE115T TPO Compound Daplen EE115T is a 10% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen EE115T is a material with excellent impact /stiffness ratio. Thanks to its low th..
Flexural Modulus	1.10 GPa @Strain <=0.400 %	160 ksi @Strain <=0.400 %	ISO 178
Total HDPE MS201 BN-NA High Density Polyethylene - Fuel Tank Resin Polyethylene: High molecular weight, high density fuel tank resin.Characteristics:Good melt strengthGood impact and creep resistanceExcellent stress cracking resistanceGMP.PE.062 certification.Appl..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
A. Schulman PP 828-31 Polypropylene Black Molding Grade Impact Polypropylene DescriptionPolypropylene PP 828-31 Black is a molding grade impact polypropylene.Information provided by A. Schulman.
Flexural Modulus	1.10 GPa	160 ksi	1.3mm per min, 1% secant; ASTM D790
Formosa Plastics Formolene® 6501A Blow Molding and Injection Molding Polypropylene Impact CopolymerApplications: Blow molded bottles and containers, blown and cast film applications, and profile extrusions such as corrugated board.Formolene 6501A is a medium impact copolymer with ..
Flexural Modulus	1.10 GPa	160 ksi	at 1% secant; ASTM D790
A. Schulman SUPERLINEAR™ XL 0370 Rotational Molding Resin DescriptionSuperlinear XL 0370 is compounded rotational molding resin based on metallocean catalyst technology. This technology allows for high impact and excellent stiffness. It is typically used..
Flexural Modulus	1.10 GPa	160 ksi	ISO 178
Total PPR 12222 Random Copolymer Polypropylene Total Petrochemicals PPR 12222 is a high melt flow index, clarified random copolymer. Its high transparency makes it particularly suitable for the production of household articles and packaging. It..
Flexural Modulus	1.10 GPa	160 ksi	0.05 in.min, tangent; ASTM D790
A. Schulman PP 3457-01 Copolymer Polypropylene DescriptionPolypropylene PP 3457-01 is a copolymer polypropylene combining high impact at cold temperatures while maintaining stiffness. Ideal for durables in such applications for the furniture, a..
Flexural Modulus	1.10 GPa	160 ksi	dry; ISO 178
DSM Novamid® ST145 NAT PA6-I Impact Modified, Injection Molding
Flexural Modulus	1.10 GPa	160 ksi	ISO 178
ExxonMobil HDPE HMA 035 High Density Polyethylene Resin Product Description: HMA 035 is a UV stabilized HDPE grade, characterized by excellent dimensional stability, good impact strength and very high stiffness. Availability: Africa & Middle East, Asia ..
Flexural Modulus	1.10 GPa	160 ksi	1% secant; ASTM D790
Braskem CP 741 Blow Molding Polypropylene Description: CP 741 is a low melt flow rate heterophasic copolymer. It has broad molecular weight distribution and general purpose additive package. CP 741 presents low odor/taste transfer, high mel..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
Buckeye Polymers BP Flex D8020 UC85 TPO TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment. These resins have excellent UV resistance and have a..
Flexural Modulus	1.10 GPa	160 ksi	1.3 mm/min, tangent; ASTM D790
A. Schulman PP 1930L-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 1930L-01 is an impact grade of polypropylene for use in parts which require good impact and good appearance in light weight injection molded parts. Information provided b..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
Albis Plastics Cellulose Acetate Butyrate B902 (UV Inhibitor Added), 13% Plasticizer  (discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
Albis Plastics Cellulose Acetate Butyrate B908 , 13% Plasticizer  (discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T..
Flexural Modulus	1.10 GPa	160 ksi	ASTM D790
Albis Plastics Cellulose Acetate Propionate CP801 (UV Inhibitor Added), 16% Plasticizer  (discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and ..