Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 241 MPa | 35000 psi | |
Pacific Sintered Materials FN-250-S Nickel Iron Powdered Metal Good impact resistant mechanical components. Good hardenability.Equivalent MPIF Specification: FN-0200-20All information provided by Pacific Sintered Metals. |
|||
Tensile Strength, Ultimate | 241 MPa | 35000 psi | ASTM D638 |
Quantum Composites Lytex® 9063 63% Glass Fiber Epoxy SMC Lytex 9063 is a high performance, glass fiber reinforced epoxy sheet molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention.. |
|||
Tensile Strength, Ultimate | 241 MPa | 35000 psi | |
PSM Industries Pacific Sintered Metals Nickel Iron FN-250-S Powdered Metal Good impact resistant mechanical components, Good hardenability Equivalent MPIF Specification: FN-0200-20Information Provided by Pacific Sintered Metals, a division of PSM Industries |
|||
Tensile Strength, Ultimate | 241 - 276 MPa | 35000 - 40000 psi | Brass butt joint |
Lucas-Milhaupt SIL-FOS 5 Silver/ Copper/ Phosphorus Alloy Applications: Sil-Fos 5 was developed primarily for use on copper, but their use has extended to other nonferrous copper base alloys. It is used extensively on refrigeration units, air conditionin.. |
|||
Tensile Strength, Ultimate | 241 - 276 MPa | 35000 - 40000 psi | Brass butt joint |
Lucas-Milhaupt SIL-FOS Silver/ Copper/ Phosphorus Alloy Applications: Sil-Fos was developed primarily for use on copper, but their use has extended to other nonferrous copper base alloys. It is used extensively on refrigeration units, air conditioning .. |
|||
Tensile Strength, Ultimate | 241 - 276 MPa | 35000 - 40000 psi | Nickel-Silver butt joint |
Lucas-Milhaupt SIL-FOS Silver/ Copper/ Phosphorus Alloy Applications: Sil-Fos was developed primarily for use on copper, but their use has extended to other nonferrous copper base alloys. It is used extensively on refrigeration units, air conditioning .. |
|||
Tensile Strength, Ultimate | 241 - 310 MPa | 35000 - 45000 psi | typical |
H.C. Starck NRC® 3N5 (UNS R05200) Electron Beam Melted Tantalum Applications: NRC® ETA Tantalum metal products are used where purity and or ductility of the tantalum metal is more important than strength or grain size. Consequently, their primary applicatio.. |
|||
Tensile Strength, Ultimate | 241 - 310 MPa | 35000 - 45000 psi | typical |
H.C. Starck NRC® 4N (UNS R05200) Electron Beam Melted Tantalum Applications: NRC® ETA Tantalum metal products are used where purity and or ductility of the tantalum metal is more important than strength or grain size. Consequently, their primary applicatio.. |
|||
Tensile Strength, Ultimate | 241 - 310 MPa | 35000 - 45000 psi | typical |
H.C. Starck NRC® 4N5 (UNS R05200) Electron Beam Melted Tantalum Applications: NRC® ETA Tantalum metal products are used where purity and or ductility of the tantalum metal is more important than strength or grain size. Consequently, their primary applicatio.. |
|||
Tensile Strength, Ultimate | 241 - 310 MPa | 35000 - 45000 psi | typical |
H.C. Starck NRC® 5N (UNS R05200) Electron Beam Melted Tantalum Applications: NRC® ETA Tantalum metal products are used where purity and or ductility of the tantalum metal is more important than strength or grain size. Consequently, their primary applicatio.. |
|||
Tensile Strength, Ultimate | 241 - 310 MPa @Temperature 20.0 °C |
35000 - 45000 psi @Temperature 68.0 °F |
typical |
H.C. Starck NRC® Tantalum (UNS R05200) Applications: High strength and excellent corrosion resistance make tantalum ideal for use in the manufacture and repair of chemical process equipment and heat exchangers. Other uses are rupture di.. |
|||
Tensile Strength, Ultimate | 241 MPa @Temperature 871 °C |
35000 psi @Temperature 1600 °F |
|
Haynes HR-160® alloy, solution annealed sheet Outstanding resistance to various forms of high-temperature corrosion attack, excellent resistance to sulfidation and chloride attack in both reducing and oxidizing atmospheres. Excellent forming an.. |
|||
Tensile Strength, Ultimate | 241 - 372 MPa | 35000 - 54000 psi | |
Eagle Brass 19210 XP-10 Copper Iron, Annealed 19210 has higher strengths than most copper alloys but thanks to its composition and processing it retains formability and conductivity that other copper alloys lose. Typical uses include cooling f.. |
|||
Tensile Strength, Ultimate | 241 MPa | 35000 psi | Worked |
CMW® D158F Silver Graphite Contact Material For electrical contacts; reduced sticking, low frictionInformation provided by CMW Inc. |
|||
Tensile Strength, Ultimate | 241 MPa | 35000 psi | cold worked |
CMW® ELKONIUM 30 pure platinum Platinum has complete freedom from atmospheric corrosion and is preferred for devices that have low closed forces and where surety of making a circuit may be a problem. It has a high melting point (.. |
|||
Tensile Strength, Ultimate | 241 MPa | 35000 psi | |
ATI Allvac® 30, Titanium Alloy, Heat Treatment: 704°C (1300°F) Anneal Data provided by Allvac.Applications: Airframe components, cryogenic vessels, heat exchangers, CPI equipment, condenser tubing, pickling baskets. |
|||
Tensile Strength, Ultimate | 241 - 310 MPa | 35000 - 45000 psi | |
Bulk Molding Compounds BMC 1401 Encapsulating Material, Electrical Grade BMC 1401 is an electrical grade of encapsulating material characterized by a balance of soft flow and cure rate to ensure complete and proper encapsulation without voiding. Generally too soft for co.. |