Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D638-95 |
Multibase Multi-Pro® 2518 CU 25% Mineral Filled Polypropylene Multi-Pro 2518 CU is a mineral reinforced polypropylene compound offering overall balanced impact and stiffness properties. This material is specially formulated with UV stabilization for outdoor ex.. |
|||
Tensile Strength, Ultimate | 24.1 - 265 MPa @Temperature -40.0 - 230 °C |
3500 - 38400 psi @Temperature -40.0 - 446 °F |
Average value: 84.7 MPa Grade Count:31 |
Overview of materials for Polyphthalamide (PPA) This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide". Each property range of values reported is minimum and maximum values of appropriate Ma.. |
|||
Tensile Strength, Ultimate | 24.1 - 91.0 MPa | 3500 - 13200 psi | Average value: 57.5 MPa Grade Count:23 |
Overview of materials for Polystyrene, Glass Filled This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene, Glass Filled". Each property range of values reported is minimum and maximum values of appr.. |
|||
Tensile Strength, Ultimate | 24.1 - 41.4 MPa | 3500 - 6000 psi | ASTM D638 |
Arkema Group Kynar Flex® 2900 PVDF Copolymer
(discontinued **) Copolymer Series, Kynar® components are used extensively in the high purity semiconductor market, the pulp and paper industry, nuclear waste processing, and the general chemical processing industry.. |
|||
Tensile Strength, Ultimate | 24.1 - 34.5 MPa | 3500 - 5000 psi | ASTM D638 |
Premix Premi-Glas® 1201-10 Polyester SMC
(discontinued **) Premi-Glas® 1201-10 is a 10% glass reinforced thermoset Sheet Molding Compound designed for sinks, shower stall bases and wall applications. Key features and benefits are:Supports ANSI 124.2 and CS.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | Measured on extruded film, ASTM D638 |
3M Dyneon™ THV™ 200P Fluorothermoplastic, Powder Form
(discontinued **) Data provided by the manufacturer, Dyneon LLC.This unique, melt-processable, tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) terpolymer provides a unique combination of perf.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | Measured on extruded film, ASTM D638 |
3M Dyneon™ THV™ 200G Fluorothermoplastic, Pellet Form
(discontinued **) Data provided by the manufacturer, Dyneon LLC.This unique, melt-processable, tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) terpolymer provides a unique combination of perf.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ISO 1184-1983E |
LyondellBasell DP 8310M Polybutene Key Features: semi-crystalline high ethylene content random copolymerApplications: packaging industry, cast film, FDA acceptableMeets FDA requirements in 21 CFR 177.1570 for direct food contact up t.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ISO 1184-1983E |
LyondellBasell DP 8510M Polybutene Key Features: semi-crystalline high ethylene content random copolymer, miscible with polyproylenesApplications: Hot Melt Adhesives, FDA acceptableMeets FDA requirements in 21 CFR 175.105 for indirec.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D638 |
Techmer ES Electrafil® PS-31/EC BK Polystyrene, Electrically Conductive Carbon Black |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | |
Williams Advanced Alloys WS296 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D412 |
Lubrizol Estane® AG 4350 Thermoplastic Polyurethane Type: Estane® AG 4350 is a polyether based aliphatic polyurethane specifically formulated to be used as an adhesive interlayer without the need for a glass surface primer. This polymer is designed.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D412 |
Lubrizol Estane® AG 4950 Thermoplastic Polyurethane Type: Estane® AG 4950 is a polyether based aliphatic thermoplastic polyurethane (TPU) specifically formulated to be used as an adhesive interlayer in transparencies for electronic displays, aerospa.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D638 |
CPC - Vycom FLAMETEC™ CP5 Fire Retardant Polypropylene (FRPP) Flametec™ CP5 was formulated to meet the SEMI S93 specification for fire safety in clean room applications. CP5 meets UL 94 V-0 fire classification and is extruded for gauge and dimensional consist.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | 45° stress angle |
Cytec Cyply® 1002 Epoxy Fiberglass Composite, Unidirectional CYPLY® 1002 is a cured epoxy composite material based on a unique non-woven parallel filament construction. This type of construction minimizes filament stress abrasion that can shorten fatigue li.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | Molded property |
Dow DOWLEX™ 2032 Linear Low Density Polyethylene, Blown Film Grade DOWLEX® 2032 Polyethylene resin is a general purpose liner resin having improved thermal stability over a broad range of processing conditions. It is an outstanding choice for thin gauge, medium st.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D-638 |
CMT Materials REN Shape® 5008 Vacuum Forming Tooling Board REN SHAPE 5008 is a tooling board specifically designed for use in vacuum forming. It is designed for use up to 250°F and is well suited for building vacuum forming molds as well as master models,.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | |
Dymax 630 Structural Adhesive Structural Adhesives for Rugged Bonding, Sealing, Tacking and Potting in SecondsMulti-Cure® 600 Series products are rapid setting adhesives that cure by UV light, activator or heat. These products .. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | |
Dymax 928 Coil Terminating, Tamper proofing and Structural Electronic Bonder High Performance Light-Curing Adhesives and Coatings for Electronic AssemblyDymax 928 Coil Terminating, Tamper proofing and Structural Electronic BonderHigh strength, excellent bridge bonding capabi.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | |
Dymax 957 Potting and Encapsulation Adhesive High Performance Light-Curing Adhesives and Coatings for Electronic AssemblyDymax 957 Potting and Encapsulation AdhesiveDesigned to adhere to a wide variety of materials, high strength. Cure Type: U.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | 2 in/min (50 mm/min); ASTM D-638 |
Bapolene® PP5061 Polypropylene, Injection Grade Bapolene PP5061 is a PP Random Copolymer for injection molding. This resin exhibits good clarity and impact properties. This product meets FDA standards for food contact applications.Applications:.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | 50 mm/min (2 in./min.); ASTM D638 |
Bapolene® PP5083 Polypropylene, Injection Grade Bapolene PP 5083 is a clarified PP Random Copolymer for injection molding. This resin exhibits good processing and impact properties. This product meets FDA regulation 21CFR 177.1520 and is suitab.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | after optimum cure |
Armstrong A-12 Epoxy Adhesive, at 2:3 Mix Ratio Our most popular general-purpose, high viscosity adhesive for industry. Combines low toxicity with excellent physical properties, and offers a non-critical mixing ratio of 1:1 by weight. This rati.. |
|||
Tensile Strength, Ultimate | 24.1 - 31.0 MPa | 3500 - 4500 psi | |
Bulk Molding Compounds BMC SLC 2000 Glass Reinforced Polyester BMC SLC 2000 is a medium strength, low-cost, glass reinforced polyester compound with adjustable shrinkage. Ideal for circuit breakers, motor switch housings, fuse holders, brush holders, standoff i.. |
|||
Tensile Strength, Ultimate | 24.1 MPa | 3500 psi | ASTM D638 |
Colorite Polymers 3876 General Purpose Vinyl Compound Description: Colorite produces many vinyl compounds. They have the compounds that perfectly suit whatever the application. Requirements such as ultraviolet ray resistance, fungus resistance, flame r.. |
|||
Tensile Strength, Ultimate | 24.1 - 52.0 MPa | 3500 - 7540 psi | Average value: 36.1 MPa Grade Count:22 |
Overview of materials for Cellulose Acetate, Molded This property data is a summary of similar materials in the MatWeb database for the category "Cellulose Acetate, Molded". Each property range of values reported is minimum and maximum values of appr.. |
|||
Tensile Strength, Ultimate | 24.1 - 73.1 MPa | 3500 - 10600 psi | Average value: 38.5 MPa Grade Count:150 |
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), Molded This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), Molded". Each property range of values reported is minimum and ma.. |
|||
Tensile Strength, Ultimate | 24.1 - 115 MPa @Temperature 60.0 - 175 °C |
3500 - 16700 psi @Temperature 140 - 347 °F |
Average value: 61.3 MPa Grade Count:3 |
Overview of materials for Polyphthalamide (PPA), Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide, Mineral Filled". Each property range of values reported is minimum and maximum values o.. |