Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | |
Kobe Steel KS85 Commercially Pure Titanium, ASTM Gr. 4, Annealed Nominal Composition: Ti-Fe-OApplications: Airplane Parts.Features: Relatively high strength, excellent corrosion resistance.Information provided by Kobe Steel |
|||
Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | |
MetalTek MTEK CX-2MW Cast UNS N26022 Severe Corrosion and Heat Resistant Alloy Information provided by MetalTek |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | Typical after Solution Annealing |
Industeel SIRIUS 310 25% Cr - 0.6% Si Heat Resistant Stainless Steel Description: CLI SIRIUS 310 grade is a fully austenitic stainless steel containing 25% Cr, 0.6% Si and 20% Ni additions. The alloy is well known for its multi-purpose high temperature corrosion resi.. |
|||
Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | Minimum Guaranteed |
Industeel URANUS® B6 N Multipurpose Austenitic Stainless Steel with PREN = 36 Description: URANUS® B6 (904L) is a multipurpose 20 Cr - 4.3 Mo high corrosion resistance austenitic stainless steel developed 40 years ago by CLI. The UR B6N is alloyed with nitrogen (~ 0.13%) t.. |
|||
Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | |
MetalTek 254 SMO® Super Austenitic Stainless Steel Corrosion resistance approaching nickel alloys, especially in chloride service. Produced under license of Avesta Jernverk AB. Applications: Process piping exposed to flue gas and solutions.Informati.. |
|||
Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | |
MetalTek MTEK 25-12 TYPE I Cast UNS J93303 Heat Resistant Stainless Steel Very sensitive to composition balance. Suitable for a wide range of high temperature applications.Applications: Rable arms, radiant tubes, refractory support hardware, grate bars.Information provide.. |
|||
Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | |
MetalTek MTEK 25-12 TYPE II Cast UNS J93303 Heat Resistant Stainless Steel Very sensitive to composition balance. Suitable for a wide range of high temperature applications.Applications: Rable arms, radiant tubes, refractory support hardware, grate bars.Information provide.. |
|||
Tensile Strength, Ultimate | 550 - 750 MPa | 79800 - 109000 psi | Minimum Guaranteed |
Industeel SOLEIL A2 13% Cr High Strength Martensitic Stainless Steel (QT550 Heat Treatment) Description: Soleil A2 has combined Chromium (~13%) and Carbon ~0.10%) additions to provide an excellent combination of high mechanical properties and improved corrosion resistance properties. The g.. |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | Annealed |
Special Metals MONEL® Alloy 400 A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalis. Used for marine engineering, chem.. |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | Annealed |
Special Metals MONEL® Alloy R-405 The free-machining version of MONEL alloy 400. A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. Other characteristics a.. |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
Wieland 1408 Wilaform Gold Hard yellow gold alloy. Easily splintered and polished.Applications: casting, laminar decoration, tubingDental |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
Wieland 1604 Wilaform Gold Rose gold for all kinds of decoration manufacturingApplications: casting, laminar decoration, pipes, tubingDental |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
Wieland 1605 Wilaform Gold Red gold for all kinds of decoration manufacturing.Applications: casting, laminar decoration, pipes, tubingDental |
|||
Tensile Strength, Ultimate | 550 - 650 MPa | 79800 - 94300 psi | |
CLAL-MSX ARCAP Anticorrosion AP1D H14 4/4 hard, Drawn Copper Alloy, Wire and rod, 5 High Corrosion Resistance: ARCAP alloys are very corrosion resistant to the majority of chemical and physical environments. CLAL can provide data for the corrosion resistance of ARCAP alloys. In par.. |
|||
Tensile Strength, Ultimate | <= 550 MPa | <= 79800 psi | Wire |
CLAL-MSX ARCAP Anticorrosion AP4 0 Annealed, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc.. |
|||
Tensile Strength, Ultimate | 550 - 650 MPa | 79800 - 94300 psi | Wire |
CLAL-MSX ARCAP Anticorrosion AP4 H11 1/4 hard, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc.. |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
Ametek P434L P/M Stainless Steel, Sintered from 7.0 g/cc Green Density >Powder apparent bulk density 2.8 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for.. |
|||
Tensile Strength, Ultimate | 550 - 650 MPa | 79800 - 94300 psi | |
ArcelorMittal HSLA 460 High strength low alloy steel for cold forming, Hot Rolled Available in the following: S460MCDescription: Steels in the HSLA (High Strength Low Alloy) range are hardened by a combination of precipitation and grain size refining, resulting in high strength w.. |
|||
Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
ATI Allegheny Ludlum E-BRITE 26-1® Superferritic Stainless Steel, UNS S44627 Property data below is typical of annealed samples. High purity superferritic stainless steel. Available in sheet and strip for use in chemical process equipment to combat chloride pitting and stre.. |