Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 340 MPa @Temperature 300 °C |
49300 psi @Temperature 572 °F |
EN min.; EN 10002-5 |
Outokumpu 4306 Cr-Ni Austenitic Stainless Steel General purpose steel with good corrosion resistance.Applications: Wide variety of applications in construction, chemical, petroleum, automobile, and domestic appliance markets.Available in hot roll.. |
|||
Tensile Strength, Ultimate | 340 MPa @Temperature 300 °C |
49300 psi @Temperature 572 °F |
EN min.; EN 10002-5 |
Outokumpu 4307 Cr-Ni Austenitic Stainless Steel General purpose steel with good corrosion resistance.Applications: Wide variety of applications in construction, chemical, petroleum, automobile, and domestic appliance markets.Available in hot roll.. |
|||
Tensile Strength, Ultimate | 340 MPa @Temperature 400 °C |
49300 psi @Temperature 752 °F |
EN min.; EN 10002-5 |
Outokumpu 4878 High Temperature Austenitic Stainless Steel Heat-resistant variant of 1.4541, with a slightly higher max carbon content. Recommended max service temperature for this steel in dry air is 800°C. Applications: Heat and creep resistance. For .. |
|||
Tensile Strength, Ultimate | 340 - 510 MPa | 49300 - 74000 psi | |
Materion Brush 1915â„¢ Hard Temper Wire, 0.050" - 0.375" Information supplied by Brush Wellman Engineered Materials.Treatment required for max strength: as suppliedBrush 1915â„¢ is Brush Wellman's new heat-treatable leaded copper alloy. Engineered spe.. |
|||
Tensile Strength, Ultimate | 340 MPa @Temperature 870 °C |
49300 psi @Temperature 1600 °F |
|
Haynes 556® alloy, hot rolled, solution annealed plate, 6.4-12.7 mm (1/2 in.) thick Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
Tensile Strength, Ultimate | 340 - 420 MPa | 49300 - 60900 psi | |
SSAB Tunnplat Aluzink 220A RP-X High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Aluzink RP - rephosphorized steel (aluminum-zinc coated sheet). Property values are for thicknesses 0.5 - 1.5 mm. Iron content is approximate - exact compo.. |
|||
Tensile Strength, Ultimate | 340 - 420 MPa | 49300 - 60900 psi | |
SSAB Tunnplat Docol® 220 BH High-strength Steel High-strength SteelComments: Docol BH - Cold Rolled Steel - rephosphorized steel with bake hardening effect. Property values are for cold-rolled steel; thicknesses 0.40 - 2.0 mm. Iron content is ap.. |
|||
Tensile Strength, Ultimate | 340 - 420 MPa | 49300 - 60900 psi | |
SSAB Tunnplat Docol® 220 RP High-strength Steel High-strength SteelComments: Docol RP - Cold Rolled Steel - rephosphorized steel. Property values are for cold-rolled steel; thicknesses 0.40 - 3.0 mm. Iron content is approximate - exact compositi.. |
|||
Tensile Strength, Ultimate | 340 - 420 MPa | 49300 - 60900 psi | |
SSAB Tunnplat Dogal 180 RP-X High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Dogal RP - rephosphorized. Iron content is approximate - exact composition is not reported by the manufacturer.Data provided by SSAB Tunnplat. |
|||
Tensile Strength, Ultimate | 340 - 420 MPa | 49300 - 60900 psi | |
SSAB Tunnplat Dogal 220 RP High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Dogal RP - rephosphorized. Iron content is approximate - exact composition is not reported by the manufacturer.Data provided by SSAB Tunnplat. |
|||
Tensile Strength, Ultimate | 340 - 420 MPa | 49300 - 60900 psi | |
SSAB Tunnplat Dogal 220 RP-X High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Dogal RP - rephosphorized. Iron content is approximate - exact composition is not reported by the manufacturer.Data provided by SSAB Tunnplat. |
|||
Tensile Strength, Ultimate | 340 MPa | 49300 psi | |
Wieland 1951 Wilaform Platinum Platinum alloy for technical use.Applications: casting, chains, laminar decoration, pipes, tubingDental |
|||
Tensile Strength, Ultimate | 340 MPa | 49300 psi | Calculated from tenacity |
DuPont™ Nomex® N301 Nomex® Aramid Staple Fiber General NOMEX Information: Nomex® is a family of aromatic polyamide (aramid) fibers. This family consists of staple fibers, continuous filament yarns, paper, and spunlaced fabrics. Uses for stapl.. |
|||
Tensile Strength, Ultimate | 340 MPa @Temperature 204 °C |
49300 psi @Temperature 400 °F |
|
AK Steel 409 ULTRA FORM® Stainless Steel AK Steel 409 ULTRA FORM Stainless Steel provides an outstanding combination of improved forming and welding characteristics, while providing superior resistance to oxidation, corrosion, ridging and .. |
|||
Tensile Strength, Ultimate | >= 340 MPa | >= 49300 psi | |
AK Steel ASTM A 1018, Grade 30 Hot Rolled Carbon Steel, Structural Steel (SS) Information provided by AK Steel |
|||
Tensile Strength, Ultimate | >= 340 MPa | >= 49300 psi | |
AK Steel ASTM A 570, Grade 30 Hot Rolled Carbon Steel, Structural Quality (SQ) For gauges up to 0.229", ASTM A 570 must be specified, gauges >0.230", ASTM A 907 must be used. Items 0.180 to 0.230" gauge which are >48" wide may be ordered to either A 570 or A 907.Information p.. |
|||
Tensile Strength, Ultimate | >= 340 MPa | >= 49300 psi | |
AK Steel ASTM A 907, Grade 30 Hot Rolled Carbon Steel, Structural Quality (SQ) For gauges up to 0.229", ASTM A 570 must be specified, gauges >0.230", ASTM A 907 must be used. Items 0.180 to 0.230" gauge which are >48" wide may be ordered to either A 570 or A 907.Information p.. |
|||
Tensile Strength, Ultimate | 340 MPa | 49300 psi | |
Ametek Ultra 303L P/M Stainless Steel, Sintered from 6.65 g/cc Green Density Ametek's patented Ultra Stainless Steels™ are produced by alloying the conventional austenitic compositions with a small amount of a copper-nickel-tin alloy. This results in a marked improvement i.. |
|||
Tensile Strength, Ultimate | 340 MPa | 49300 psi | |
Ametek Ultra 304L P/M Stainless Steel, Sintered from 6.75 g/cc Green Density Ametek's patented Ultra Stainless Steels™ are produced by alloying the conventional austenitic compositions with a small amount of a copper-nickel-tin alloy. This results in a marked improvement i.. |
|||
Tensile Strength, Ultimate | 340 - 400 MPa | 49300 - 58000 psi | |
ArcelorMittal 195 BH Bake hardening steel, Cold rolled Description: The composition and processing of these steels are designed to promote a significant increase in yield strength during low-temperature heat treatment, particularly paint curing. Arcelor.. |
|||
Tensile Strength, Ultimate | 340 - 400 MPa | 49300 - 58000 psi | |
ArcelorMittal 220 BH Bake hardening steel, Cold rolled Available in the following: uncoated (HC220B), electroglavanized (HC220B+ZE) and Extragal®/Galvannealed (HC220BD+Z)Description: The composition and processing of these steels are designed to promot.. |
|||
Tensile Strength, Ultimate | 340 - 400 MPa | 49300 - 58000 psi | |
ArcelorMittal IF 180 High strength IF steel, Cold rolled Available in the following: uncoated (HC180Y), electroglavanized (HC180Y+ZE) and Extragal®/Galvannealed (HX180YD+Z/+ZF)Description: These steels were designed to provide an excellent combination of.. |
|||
Tensile Strength, Ultimate | 340 - 400 MPa | 49300 - 58000 psi | |
ArcelorMittal IF 220 High strength IF steel, Cold rolled Available in the following: uncoated (HC220Y), electroglavanized (HC220Y+ZE) and Extragal®/Galvannealed (HX220YD+Z/+ZF)Description: These steels were designed to provide an excellent combination of.. |
|||
Tensile Strength, Ultimate | >= 340 MPa | >= 49300 psi | |
AK Steel ASTM A 1011, Grade 30 Hot Rolled Carbon Steel, Structural Steel (SS) Information provided by AK Steel |
|||
Tensile Strength, Ultimate | >= 340 MPa | >= 49300 psi | Minimum |
Aleris Weldural Aluminum Alloy, 300 mm Thickness Sample treatment not specified for property data.Applications include precise mechanical parts with high dimensional stability, machine components, molds, and refrigeration engineering. Good weldab.. |
|||
Tensile Strength, Ultimate | 340 MPa | 49300 psi | |
Ametek P304L P/M Stainless Steel, Sintered from 6.5 g/cc Green Density Powder apparent bulk density 2.7 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for .. |
|||
Tensile Strength, Ultimate | 340 MPa | 49300 psi | |
Ametek P430L P/M Stainless Steel, Sintered from 6.2 g/cc Green Density Powder apparent bulk density 2.8 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for .. |
|||
Tensile Strength, Ultimate | 340 - 400 MPa | 49300 - 58000 psi | |
ArcelorMittal H 220 Solid solution steel, Cold rolled Available in the following: uncoated (HC220P) and electrogalvanized (HC220P+ZE) Description: Solid solution steels are designed to provide high strength while maintaining good drawability. These ste.. |