Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 29.6 MPa | 4300 psi | ASTM D638 |
Multibase Nylex™ 2185 HF Black Polyamide + PP Forms: PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4290 psi | ASTM D1708 |
DSM Biomedical CarboSil® 40 90A Biocompatible Silicone Polycarbonate Urethane
(discontinued **) Combines the biocompatibility and biostability of conventional silicone elastomers with the processability and toughness of thermoplastic urethane elastomers. Noncytotoxic and nonhemolytic. Low-En.. |
|||
Tensile Strength, Ultimate | 29.6 - 175 MPa | 4300 - 25400 psi | Average value: 96.8 MPa Grade Count:156 |
Overview of materials for Nylon 66, 10% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 10% Glass Fiber Filled". Specific grades with glass content between 5% and 14% are included. .. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4300 psi | Vulcanized |
KKPC KOSYN 1500 Styrene Butadiene Rubber Styrene Butadiene RubberCharacteristics: KOSYN SBR, a useful synthetic rubber, is a copolymer made from butadiene and styrene by cold emulsion polymerization. It has superior abrasion resistance and.. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4300 psi | Vulcanized |
KKPC KOSYN 1502 Styrene Butadiene Rubber Styrene Butadiene RubberCharacteristics: KOSYN SBR, a useful synthetic rubber, is a copolymer made from butadiene and styrene by cold emulsion polymerization. It has superior abrasion resistance and.. |
|||
Tensile Strength, Ultimate | 29.6 MPa @Treatment Temp. 150 °C, Time 605000 sec |
4300 psi @Treatment Temp. 302 °F, Time 168 hour |
Heat Aging; ASTM D 412/ASTM D 573 |
Zylog Neoplast® 250 FT EB Thermoplastic Vulcanizate Neoplast 250 FT EB is a hard, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Molding, Blow Molding and Extrusion applications.Ro.. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4290 psi | ASTM D638 |
Eastman Tenite Acetate 105E2R30025 Natural, Trsp Cellulose Acetate Plasticizer 33%. Weight loss on heating = 3.6% per ASTM D 707. Soluble matter loss = 0.6% per ASTM D 570.Product Description: TENITE cellulosic plastics are noted for their excellent balance of p.. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4300 psi | ASTM D638 |
Devcon Combo Wear FC Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4300 psi | ASTM D638 |
Devcon Wear Guard (Fine Load) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4290 psi | |
3M Scotch-Weld™ 183 B/A Green Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive 1838 B/A is a controlled flow product. This epoxy adhesives are two-part, room temperature curing structural adhesives with high shear strengths and excellent envir.. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4300 psi | ASTM D412 |
D-2103 Styrene-based Biomedical Elastomer |
|||
Tensile Strength, Ultimate | 29.6 - 54.2 MPa | 4290 - 7850 psi | Average value: 40.2 MPa Grade Count:6 |
Overview of materials for Silicone Polyurethane, Polycarbonate Based This property data is a summary of similar materials in the MatWeb database for the category "Silicone Polyurethane, Polycarbonate Based". Each property range of values reported is minimum and maxim.. |
|||
Tensile Strength, Ultimate | 29.6 MPa | 4290 psi | ASTM D638 |
Buckeye Polymers BP RPP 4012 TU Polypropylene, 40% Mineral Filled UV StabilizedThis Talc-filled product exhibits excellent properties such as high stiffness, surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and mar resistan.. |