Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 270 MPa @Temperature 980 °C |
39200 psi @Temperature 1800 °F |
|
Haynes 25 alloy, cold worked sheet, 10% cold reduction Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
Tensile Strength, Ultimate | 270 - 410 MPa | 39200 - 59500 psi | |
SSAB Tunnplat Docol® DC01 (Fe P01) Deep-drawing Steel Deep-drawing SteelComments: Docol - Cold Rolled Mild Steel. Property values are for thicknesses 0.40 - 3.00 mm. Iron content is approximate - exact composition is not reported by the manufacturer... |
|||
Tensile Strength, Ultimate | 270 - 370 MPa | 39200 - 53700 psi | |
SSAB Tunnplat Docol® DC02 (Fe P03) Deep-drawing Steel Deep-drawing SteelComments: Docol - Cold Rolled Mild Steel. Property values are for cold-rolled steel; thicknesses 0.40 - 3.00 mm. Iron content is approximate - exact composition is not reported b.. |
|||
Tensile Strength, Ultimate | 270 - 350 MPa | 39200 - 50800 psi | |
SSAB Tunnplat Docol® DC04 (Fe P04) Deep-drawing Steel Deep-drawing SteelComments: Docol - Cold Rolled Mild Steel. Property values are for cold-rolled steel; thicknesses 0.40 - 3.00 mm. Iron content is approximate - exact composition is not reported b.. |
|||
Tensile Strength, Ultimate | 270 - 330 MPa | 39200 - 47900 psi | |
SSAB Tunnplat Docol® DC05 (Fe P05) Deep-drawing Steel Deep-drawing SteelComments: Docol - Cold Rolled Mild Steel. Property values are for cold-rolled steel; thicknesses 0.40 - 3.00 mm. Iron content is approximate - exact composition is not reported b.. |
|||
Tensile Strength, Ultimate | 270 - 350 MPa | 39200 - 50800 psi | |
SSAB Tunnplat Docol® DC06 (Fe P06) Deep-drawing Steel Deep-drawing SteelComments: Docol - Cold Rolled Mild Steel. Property values are for cold-rolled steel; thicknesses 0.40 - 3.00 mm. Iron content is approximate - exact composition is not reported b.. |
|||
Tensile Strength, Ultimate | 270 - 300 MPa | 39200 - 43500 psi | |
CLAL-MSX SICLANIC S® TB Quenched Copper Alloy SICLANIC S® is particularly recommended for the production of conductive contact blades. SICLANIC S® offers :electrical conductivity greatly superior to that of bronzes, brasses and nickel silver.. |
|||
Tensile Strength, Ultimate | 270 - 400 MPa | 39200 - 58000 psi | |
ArcelorMittal 01 High formability steel for drawing, Cold rolled Available in the following: uncoated (DC01) and electroglavanized (DC01+ZE) Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These product.. |
|||
Tensile Strength, Ultimate | 270 - 360 MPa | 39200 - 52200 psi | |
ArcelorMittal 02 High formability steel for drawing, Cold rolled Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used extensively in the automotive industry, both for visible and stru.. |
|||
Tensile Strength, Ultimate | 270 - 330 MPa | 39200 - 47900 psi | |
ArcelorMittal 06 High formability steel for drawing, Cold rolled Available in the following: uncoated (DC06) and electroglavanized (DC06+ZE) Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These product.. |
|||
Tensile Strength, Ultimate | 270 - 350 MPa | 39200 - 50800 psi | |
ArcelorMittal 15 High formability steel for drawing, Hot rolled Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used extensively in the automotive industry, both for visible and stru.. |
|||
Tensile Strength, Ultimate | 270 - 350 MPa | 39200 - 50800 psi | |
ArcelorMittal 16 High formability steel for drawing, Hot rolled Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used extensively in the automotive industry, both for visible and stru.. |
|||
Tensile Strength, Ultimate | 270 - 400 MPa | 39200 - 58000 psi | |
ArcelorMittal 51 High formability steel for drawing, Cold rolled Available in the following: Extragal®/Galvannealed (DX51D +Z/+ZF)Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used.. |
|||
Tensile Strength, Ultimate | >= 270 MPa | >= 39200 psi | Rm |
ALIMEX PLANAL 5083 O/H111 Aluminum Alloy Aluminium rolled plates which have been machined on both sides. Has a precise surface finish and high tensile strength. The temper values and the material conditions are not changed by surface-machi.. |
|||
Tensile Strength, Ultimate | 270 - 330 MPa | 39200 - 47900 psi | |
ArcelorMittal 05 High formability steel for drawing, Cold rolled Available in the following: uncoated (DC05) and electroglavanized (DC05+ZE) Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These product.. |
|||
Tensile Strength, Ultimate | 270 - 500 MPa | 39200 - 72500 psi | |
ArcelorMittal 51+AS Aluminized steel Use: Roll forming - Lock seamingInformation provided by ArcelorMittal |
|||
Tensile Strength, Ultimate | 270 - 360 MPa | 39200 - 52200 psi | |
ArcelorMittal 52 High formability steel for drawing, Cold rolled Available in the following: Extragal®/Galvannealed (DX52D +Z/+ZF)Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used.. |
|||
Tensile Strength, Ultimate | 270 - 420 MPa | 39200 - 60900 psi | |
ArcelorMittal 52+AS Aluminized steel Use: Average drawingInformation provided by ArcelorMittal |
|||
Tensile Strength, Ultimate | 270 - 380 MPa | 39200 - 55100 psi | |
ArcelorMittal 53+AS Aluminized steel Use: Difficult drawingInformation provided by ArcelorMittal |
|||
Tensile Strength, Ultimate | 270 - 370 MPa | 39200 - 53700 psi | |
ArcelorMittal 55+AS Aluminized steel Use: Very difficult drawing, 600°< T < 800°CInformation provided by ArcelorMittal |
|||
Tensile Strength, Ultimate | 270 - 330 MPa | 39200 - 47900 psi | |
ArcelorMittal 56 High formability steel for drawing, Cold rolled Available in the following: Extragal®/Galvannealed (DX56D +Z/+ZF)Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used.. |
|||
Tensile Strength, Ultimate | 270 - 330 MPa | 39200 - 47900 psi | |
ArcelorMittal 57 High formability steel for drawing, Cold rolled Available in the following: Extragal®/Galvannealed (DX57D +Z/+ZF)Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used.. |