Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | ASTM D1922 |
ExxonMobil ESCOR™ AT 310 Blown Film Resin
(discontinued **) ESCOR AT 310 is an acid terpolymer which provides excellent adhesion to a variety of polar and non-polar materials such as metals, glass, polyolefins, polyamides, polyesters, etc. It is suitable fo.. |
|||
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | 50 µm (2 mil) film; ASTM D1922 |
DuPont Nucrel® 1202HC Ethylene-Methacrylic Acid Copolymer Resin for Blown and Cast Film 11.5 wt% Methacrylic Acid.Nucrel® 1202HC (High-Clarity) is an ethylene-methacrylic acid copolymer resin available for use in conventional blown and cast film extrusion and coextrusion equipment des.. |
|||
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | 50 µm (2 mil) film; ASTM D1922 |
DuPont Nucrel® 903 Ethylene-Methacrylic Acid Copolymer Resin for Blown and Cast Film 9 wt% Methacrylic Acid.Nucrel® 0903 is an ethylene-methacrylic acid copolymer resin available for use in conventional blown and cast film extrusion and coextrusion equipment designed to process pol.. |
|||
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | ASTM D1922 |
ExxonMobil LL 3201.36 Premium High Strength Film Resin Product Description: LL 3201 resins are LLDPE hexane copolymer film resins. Films made from LL 3201 resins have outstanding tensile, stiffness and toughness properties. These superior properties, al.. |
|||
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | ASTM D1922 |
ExxonMobil LL 3201.69 Premium High Strength Film Resin Product Description: LL 3201 resins are LLDPE hexane copolymer film resins. Films made from LL 3201 resins have outstanding tensile, stiffness and toughness properties. These superior properties, al.. |
|||
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | ASTM D882 |
Dow INTEGRAL™ 917 Monolayer Bonding Film INTEGRAL 917 Adhesive Film is a single layer adhesive film for use where a higher flow rate and lower melt point are required. It is useful for bonding heat sensitive materials, or for porous subst.. |
|||
Elmendorf Tear Strength, MD | 5.51 g/micron | 140 g/mil | ASTM D882 |
Dow INTEGRAL™ 899A Monolayer Adhesive Film INTEGRAL 899A Adhesive Film is a versatile heat-activated film that bonds to such substrates as: Polyethylene, Nylon, Polyester, Fiberglass, Glass, Polyurethane Foams/Sheet, Acrylic Adhesives, Wood.. |