Polymer Property : Tensile Modulus = 1.10 GPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Modulus	1.10 GPa	160 ksi	STN EN ISO 527-2
Plastcom PLASTALEN® PQ 81 T 15/1 Polypropylene reinforced with mineral filler, impact modified Modified PP for injection molding with the content of 15% mineral filler. Application in automotive industry. Delivered in black grade.Information Provided by Plastcom spol. s r.o.
Tensile Modulus	1.10 GPa	160 ksi
Radici Radilon® S 32HS (cond.) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
Tensile Modulus	1.10 GPa @Temperature 23.0 °C	160 ksi @Temperature 73.4 °F	ISO 527-2/1
PolyOne Bergamid™ B700 Polyamide 6 (Nylon 6) Information provided by PolyOne
Tensile Modulus	1.10 GPa @Temperature 23.0 °C	160 ksi @Temperature 73.4 °F	ISO 527-2/1
PolyOne Bergamid™ B700 X2 Polyamide 6 (Nylon 6) Information provided by PolyOne
Tensile Modulus	1.10 GPa	160 ksi	Type I, 51 mm/min; ASTM D638
PolyOne Maxxam™ FR PE 152 Polyethylene, Unspecified (PE, Unspecified) Maxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V..
Tensile Modulus	1.10 GPa	160 ksi
LyondellBasell LupolenÂ® 5231 HX HDPE, Impact Grade Medium flow, impact resistant, very stress-crack resistant grade for closures, bottles that contain carbonated liquids, storage and tote boxes, as well as engineering components.Data was collected b..
Tensile Modulus	1.10 GPa	160 ksi	ASTM D638
Ineos Styrenics Polystyrene 486N (NAFTA) High-impact grade of polystyrene with excellent ESCR.Information provided by BASF.Ineos Styrenics purchased this product line from BASF in 2005.
Tensile Modulus	1.10 GPa	160 ksi	Conditioned; ISO 527-1/-2
Lanxess DurethanÂ® B 30 S FN40 000000 Nylon 6 PA 6, injection molding grade, non- reinforced, good flowability, easy-release, fast cycling, UL 94V-2 off 0,75 mm, GWIT 775Â°C bei 0,75/1,5mm
Tensile Modulus	1.10 GPa	160 ksi	ISO 527-2
Solvay Specialty Polymers PolidanÂ® T/A Polyethylene, Crosslinked (XLPE) POLIDANÂ® T/A is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes.Features..
Tensile Modulus	1.10 GPa	160 ksi	ASTM D638
Lubrizol Stat-Rite® S-680 Static Control PETG Alloy Stat-Rite® S-680 is a static dissipative PETG alloy. Stat-Rite® M-680 utilizes the patented Stat-Rite® inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protectio..
Tensile Modulus	1.10 GPa	160 ksi	1mm/min; ISO 527-3
Borealis RE420MO Polypropylene Random Copolymer, Transparent RE420MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is intended for injection molding and stretch blow molding. and is designed ..
Tensile Modulus	1.10 GPa	160 ksi	TD; ASTM D882-A
Borealis FS1470 High Density Polyethylene FS1470 is a high density polyethylene film grade which combine excellent extrusion behavior with superior mechanical properties. Films made of FS1470 have high impact and tensile strength, and bala..
Tensile Modulus	1.10 GPa	160 ksi	ISO 527-2
Total PPC 4660 Polypropylene, Heterophasic Copolymer ATOFINA Polypropylene PPC 4660 is heterophasic copolymer.
Tensile Modulus	1.10 GPa	160 ksi
Covestro Bayflex® 110-50 Polyurethane Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® FG 40 NL nat 6025 PA6 Product description: Grilon FG 40 NL natural 6025 is a modified, high viscosity polyamide 6. Compared to conventional polyamide 6 Grilon FG40 NL natural 6025 offers the following improvements:Better..
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® L 16 LM PA12 Product Description: Grilamid L 16 LM is a , low viscosity extrusion type, based on Polyamide 12 (PA12). Grilamid L 16 LM is UV- and heat stabilized. The modification with a nucleation agent results..
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® L 20 GM PA12 Product Description: Grilamid L 20 GM is a medium viscosity, heat stabilized polyamide 12 non-reinforced injection molding grade. This product has very good flow characteristics. Special features of..
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® L 20 L PA12 Product Description: Grilamid L 20 L is a medium viscosity Polyamide 12 (PA12) extrusion type. It is UV and heat stabilized. Its main features are: High surface quality Very good UV and heat resista..
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® L 25H FWA black 9225 PA12 Product Description: Grilamid L 25 H FWA black 9225 is a highviscosity, unreinforced and heat stabilized Polyamide 12 (PA12). Grilamid L 25 H FWA black 9225 is designed for technical injection mould..
Tensile Modulus	1.10 GPa	160 ksi	Foaming Direction
Cymat A35620SC 030SS Stabilized Aluminum Foam Description: Cymat A35620SC 030SS stabilized aluminum foam (SAF) is a closed cell aluminum foam formed from A356 aluminum alloy with a density of 0.3 g/cm3. The mechanical properties of SAF make it ..
Tensile Modulus	1.10 GPa	160 ksi	ISO527-2
ExxonMobil PPU0009F Polypropylene Impact Copolymer Product Description: An unstabilized impact copolymer resin designed for automotive and compounding applications.Availability: Europe Processing Method: CompoundingInformation provided by ExxonMobi..
Tensile Modulus	1.10 GPa	160 ksi	ISO 527
CP-Polymer-Technik Wellamid® 6000 CP Nylon 6, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® L 20H FWA nat PA12 Product Description: Grilamid L 20 H FWA natural is a medium viscosity, unreinforced and heat stabilized Polyamide 12 (PA12). Grilamid L 20 H FWA natural is used for technical injection molded parts..
Tensile Modulus	1.10 GPa	160 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® L 25 LM PA12 Product Description: Grilamid L 25 LM is a heat and UV stabilized nylon 12 grade for tube extrusion. According to DIN 73378 Grilamid L 25 LM corresponds to the type PA 12 HL. Grilamid L 25 LM fulfil..
Tensile Modulus	1.10 GPa	160 ksi	50%RH; ISO 527-1/-2
DuPont Performance Polymers Zytel® 444AHS BK152 Nylon 66 (Unverified Data**) Toughened Heat Stabilized Polyamide 66 Zytel 444AHS is a toughened heat stabilized black polyamide 66 resin for injection molding. It is a high flow processing friendly material.Information provided..
Tensile Modulus	1.10 GPa	160 ksi	1[mm/min]; ISO 527-1/2
Akro-Plastic Akromid® A3 (2414) PA 6.6 Conditioned AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Tensile Modulus	1.10 GPa	160 ksi
BASF Novolen® 3240 NC Polypropylene Grade containing nucleating agent for transparent injection molded parts.Data was collected by ISO methods and provided by BASF.
Tensile Modulus	1.10 GPa	160 ksi	cond.; ISO 527
Azoty Tarnow™ Tarnamid® T-29 MCS Polyamide 6 - Colored Colored medium-high viscosity grade for injection molding.Tarnamid® has the following main properties:High mechanical strength, rigidity and hardnessHigh impact strengthHigh vibration damping capac..
Tensile Modulus	1.10 GPa	160 ksi	STN EN ISO 527-2
Plastcom SLOVALEN PQ 51 N Polypropylene Homopolymer, Modified with Elastomer, Impacted FeaturesHomopolymer PP modified with elastomer. The addition of thermoplastic elastomer causes increased toughness, possible alternative to PP copolymers. General application in all industry branc..
Tensile Modulus	1.10 GPa @Temperature 150 °C	160 ksi @Temperature 302 °F	ISO 527-2
Solvay Specialty Polymers Amodel® A-1240 L Polyphthalamide (PPA) (discontinued **) Amodel A-1240 L is a 40% mineral filled polyphthalamide (PPA) that offers low warpage and excellent dimensional stability. This resin also has a high deflection temperature, flexural modulus and ten..