Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 0.800 GPa | 116 ksi | ISO 527-1 |
Polikim ULPOLEN® 1000 UHMWPE, Flame Retardant For those producing flammable materials and in the mining industry, explosion and fire are major dangers. It is of vital importance that in conveyor belts and bunkers, lining material is flame retar.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ISO 527-1/-2 |
Quadrant EPP TIVAR® 1000 ASTL PE-UHMW + specific additives (ISO Data) TIVAR 1000 ASTL, based on a PE-UHMW grade with extremely high molecular weight, has been specifically developed for tough anti-abrasion applications. TIVAR 1000 ASTL shows a higher wear and abrasion.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | Secant; ASTM D638 |
NOVA Chemicals Novapol® HD-2100-U MDPE Extrusion Resin Features: Excellent ESCR and toughness, high strength, excellent processability.Applications: pipe, water pipe, fuel gas pipe, re-lining pipe, steel pipe coating.Data provided by the manufacturer. |
|||
Tensile Modulus | >= 0.800 GPa | >= 116 ksi | 2% sec, TD; ASTM D882 |
NIZHNEKAMSKNEFTEKHIM PE 4252A (524H1) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | |
LyondellBasell Lupolen® 4152 D SW 00413 HDPE Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ISO 527 |
Iran Petrochemical (PCC) EX 1 HF 7740F High Density Polyethylene EX1 is a high density polyethylene with 1-Butene as co monomer. It has acceptable tear strength, medium molar mass and narrow molar mass distribution.Applications: stretched film and tapes for prod.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® B 31 F 000000 Nylon 6, Film Grade PA 6, film grade, low viscosity, easy flow, additive-freeApplication Examples: flat and blown film, monofilaments, coatings |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | cond.; ISO 527-1, -2; 1 mm/min |
Lanxess Durethan® B 31 FCS 000000 Nylon 6, Film Grade PA 6, non-reinforced, extrusion, low viscosity, slip agentInformation provided by LANXESS. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® B 35 FA 000000 Nylon 6, Film Grade PA 6, film , medium viscosity, lubricated, not nucleated, in compliance with FDA for food contact and acc. the German BgVV Recommendation XLIV, Section VI.A" Synthetic casings in polyamide"Applicati.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® B 35 FKA 000000 Nylon 6, Film Grade PA 6 Film grade, medium viscosity, nucleated, with processing and slip additives, in compliance with FDA for food contactApplication Examples: flat and blown film, flat film coextrusion for PA/PE co.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® B 40 F 000000 Nylon 6, Film Grade PA 6, Film grade, high viscosity, without additives or processing aids, in compliance with FDA for food contact and acc. the German BgVV Recommendation XLIV, Section VI.A" Synthetic casings in polya.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | GB1040 |
JPJ Technologies HDPE Pipe Grade Information provided by JPJ Technologies |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ISO 527 Type 1A |
Solvay TECHNYL® eXten D 458P PA6.10, DRY Description: Product in development - provisional datasheet. High viscosity unfilled plasticized PA6.10 for extrusion applications providing low end part warpage.Available in: Asia Pacific, Europe, .. |
|||
Tensile Modulus | 0.800 - 1.20 GPa | 116 - 174 ksi | 1.0 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 11010 Polyvinylidene Fluoride (PVDF) Solef® 11010 PVDF is a medium-viscosity flexible PVDF copolymer resin and is typically processed by extrusion.Features: Copolymer; Good Flexibility; Medium ViscosityAdditional Properties: Crystal.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | At 1 mm/min; ISO 527-2 |
Borealis Borcoat™ BB125E Polypropylene Adhesive for Steel Pipe Coating Borcoat BB125E is a chemically modified polypropylene copolymer designed to be used as the tie layer between the epoxy corrosion protection layer and the top-coat polypropylene Borcoat BB108E-1199.B.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | At 1 mm/min; ISO 527-2 |
Borealis Borstar® ME3440 Black Medium Density Polyethylene for Pressure Pipes Borstar ME3440 is a black, bimodal medium density polyethylene compound classified as a MRS 8.0 material (PE80), with optimum balance between flexibility and strength, produced with the advanced Bor.. |
|||
Tensile Modulus | 0.800 GPa @Temperature 100 °C |
116 ksi @Temperature 212 °F |
DIN 53457 |
Zell-Metall Engineering Plastics Zellamid 1100 Zellamid® 1100 is the registered trademark for Zell-Metalls cast nylon 6 in different qualities.Our standard quality is a heavy duty, high impact, wear and heat resistant polyamide. It offers .. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ISO 527-1/-2 |
Unitika ET2025 PA6, Conditioned High-impact nylonInformation provided by Unitika Ltd. |
|||
Tensile Modulus | 0.800 GPa @Temperature 120 °C |
116 ksi @Temperature 248 °F |
ISO 527-1/-2 |
DSM Stanyl® TW341-B PA46 Heat Stabilized, Lubricated |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® XE 4181 black PA1010 Product description: Grilamid XE 4181 black 9992 is a unreinforced, high viscosity, plasticized, high impact resistant polyamide 1010 (PA1010) extrusion grade. Grilamid XE 4181 black 9992 is highly .. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | DIN 53 457 |
Hippe PE 500 Polyethylene Tough, flexible and stiff, depending on the crystalline structure (density). Resinous surface. Excellent dielectric properties, Good resistance against solvents, acids and alkalis. Physiologicall.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® BRZ 234/1 W PA6 Grilon BRZ 234/1 W is a modified polyamide 6, suitable for tube extrusion. Grilon BRZ 234/1 W is heat stabilized, shows a high flexibility and high impact strength. It is especially developed for th.. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ASTM D638 |
Aclo Accucomp Polypropylene CPO407L Copolymer |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | |
BASF Novolen® 2800 J Polypropylene Injection molded partsData was collected by ISO methods and provided by BASF. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | |
BASF Novolen® 3340 PC Polypropylene Nucleated grade for injection moldings with higher transparency.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ASTM D638 |
Aclo Accuguard Polypropylene CP0467V0CSV Copolymer Flame Retardant Automotive Approved grade |
|||
Tensile Modulus | 0.800 GPa | 116 ksi | ASTM D638 |
Asahi Glass Fluon® ETFE A thermoplastic fluoropolymer developed by Asahi Glass. It is a copolymer comprising of tetrafluoroethylene and ethylene. Fluon® ETFE is a balanced fluoropolymer that has chemical resistance and el.. |
|||
Tensile Modulus | 0.800 - 1.20 GPa @Thickness 2.00 mm, Temperature 23.0 °C |
116 - 174 ksi @Thickness 0.0787 in, Temperature 73.4 °F |
Type IV, 1.0 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 11010 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 11010 PVDF is a medium-viscosity flexible PVDF copolymer resin and is typically processed by extrusion.Information provided by Solvay Specialty Polymers. |
|||
Tensile Modulus | 0.800 - 0.900 GPa | 116 - 131 ksi | |
Addcomp PRIEX® Ionomer 45101 PP random copolymer Ionomers will be used toStrengthen rigidity and hardness while maintaining impact resistance in polyolefinsMaintain adhesion even under contaminated conditions especially in fatty substratesReduce t.. |