Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Network Polymers F7000 Polystyrene Description: Ignition RetardantInformation provided by Network Polymers Inc. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Spartech PP7110 Talc Filled High Impact Copolymer Good material choice for applications where low to medium levels of impact are required and where stiffness and heat deflection properties remain criticalInformation provided by Spartech |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | Longitudinal |
Saint-Gobain Norton® Fluorglas® Chemfilm® R167 Extruded Expanded PTFE Film (0.004" thick) Description: Expanded Unsintered Films are used in microwave and coaxial cable applications in which low dielectric constant and high velocities are required. R167-nominal density of 0.7 g/cc. R165-.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman PP 1404-01 Polypropylene High Impact Polypropylene DescriptionPolypropylene PP 1404-01 is a medium flow, high-impact polypropylene for injection molded parts. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
A. Schulman PP 2173-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 2173-01 is a relatively medium flow, high-impact polypropylene for injection molded parts. ApplicationPP 2173-01 meets FDA Regulation 21 CFR 177.1250 for food contact app.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP477-01 High-Density Polyethylene DescriptionLP 477-01 is a high-density polyethylene possessing excellent impact strength for blow molded bleach and detergent bottles, thermoformed industrial parts, tote boxes, trays, liners and ph.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman PP 1404-01 Polypropylene High Impact Polypropylene DescriptionPolypropylene PP 1404-01 is a medium flow, high-impact polypropylene for injection molded parts. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP551-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP551-01 is a narrow molecular weight copolymer, high-density polyethylene combining excellent impact strength with good environmental stress crack resistance. ApplicationApplications of.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman LP552-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP 552-01 is a U.L. approved narrow molecular weight copolymer high-density polyethylene combining good flow with excellent stiffness and cold temperature impact strength. It has good tou.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min.; ASTM D638 |
Formosa Plastics Formolene® 2535A Thin Walled Injection Molding Polypropylene Medium Impact CopolymerApplications: Dairy packaging and stadium cups.Formolene 2535A is a medium impact, controlled rheology copolymer of polypropylene designed for such applications as dairy packa.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min; ASTM D638 |
Formosa Plastics Formolene® 6610A Impact Copolymer Polypropylene Impact Copolymer for Compounding and Injection Molded Applications Formolene® 6610A is a high impact copolymer of polypropylene designed for such injection applications as automotive compounding, l.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Total PSI 845E Polystyrene Polystyrene 845E is a high impact polystyrene specially designed for the custom sheet market. The polymer produces tough, ductile sheet with a rich matte finish. This material is especially suitable.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 530 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 530 is an injection molding grade olefinic thermoplastic elastomer. This mineral filled product is recommended for applications requiring high stiffness and low thermal exp.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman PP 1404-01 Polypropylene High Impact Polypropylene DescriptionPolypropylene PP 1404-01 is a medium flow, high-impact polypropylene for injection molded parts. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP544-01 High-Density Copolymer Polyethylene DescriptionLP 544-01 is a high-density copolymer polyethylene with exceptional ESCR and crush strength combined with good processability for applications including telecommunication ducting, thermof.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP551-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP551-01 is a narrow molecular weight copolymer, high-density polyethylene combining excellent impact strength with good environmental stress crack resistance. ApplicationApplications of.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
A. Schulman LP552-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP 552-01 is a U.L. approved narrow molecular weight copolymer high-density polyethylene combining good flow with excellent stiffness and cold temperature impact strength. It has good tou.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D638 |
Total HDPE 7195 High Density Polyethylene, Specialty Extrusion Resin Characteristics:Medium molecular weightNarrow molecular weight distributionDesigned for high speed orientationApplications:MonofilamentSlit tapeWoven and knitted fabricsSpecialty filmsInformation pr.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
A. Schulman PP 2173-01 Polypropylene High-Impact Polypropylene DescriptionPolypropylene PP 2173-01 is a relatively medium flow, high-impact polypropylene for injection molded parts. ApplicationPP 2173-01 meets FDA Regulation 21 CFR 177.1250 for food contact app.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min.; ASTM D638 |
Formosa Plastics Formolene® 2520A Injection Molding Polypropylene Medium Impact CopolymerApplications: Closures, Housewares, and Small Appliance ApplicationsFormolene 2520A is a medium impact copolymer of polypropylene characterized by its easy mold flow, physical.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2" (50mm) per min.; ASTM D638 Type IV |
Formosa Plastics Formolene® HP4401 Pipe HDPE High Density Hexene CopolymerApplications: Potable water, industrial mining, oil and gas gatheringsFormolene HP4401 is a high performance copolymer that is designed for the most demanding requiremen.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP544-01 High-Density Copolymer Polyethylene DescriptionLP 544-01 is a high-density copolymer polyethylene with exceptional ESCR and crush strength combined with good processability for applications including telecommunication ducting, thermof.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 45 PHR Atomite Whiting Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ISO 527-1/2 |
CTC X-PRO CTC PP 2040 Polypropylene Copolymer X-PRO PP 2040 is a high melt polypropylene copolymer. It has applications in general purpose industrial, housewares, and construction.Data provided by Composite Technologies (CTC). |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ISO 527-1/2 |
CTC X-PRO CTC PP2020 Polypropylene Impact Copolymer X-PRO PP 2020 is an impact, polypropylene copolymer. It has automotive and industrial general purpose applications.Data provided by Composite Technologies (CTC). |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | Compression molded parts prepared according to ASTM D 1928 Procedure C.; ASTM D638 |
Dow DGDB-2480 NT High Density Polyethylene Resin DOW DGDA-2475 NT is produced using UNIPOL™ process technology. It is intended for use in pipe applications where long term hydrostatic strength and resistance to slow crack growth are desired. Su.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | ASTM D-638 |
Axiall 124C Moldings & Extrusions Flexible PVC 60C injection molding, plug stock compound. UL approved for 94HB in all colors at a minimum thickness of 3.00 mm.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | |
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer, Hardness 83A MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | 2"/min; ASTM D638 |
A. Schulman LP551-01 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP551-01 is a narrow molecular weight copolymer, high-density polyethylene combining excellent impact strength with good environmental stress crack resistance. ApplicationApplications of.. |
|||
Tensile Strength, Yield | 22.1 MPa | 3200 psi | Type I; ASTM D638 |
M. Holland Company IS325 Polystyrene, High Impact
(discontinued **) Features: Impact ModifiedUses: Construction Applications, Structural Foam, PackagingApprovals: FDA 21 CFR 177.1520Processing Method: Injection MoldingInformation provided by M. Holland. |