Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
Multibase Multi-Pro® 3011 CHI Polypropylene Calcium Carbonate Filler, 30% by weight.Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable JAX21P Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W1820L Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W3400 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable Y66A Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
Resirene Resirene® READ 9500 Ignition Resistant Impact Polystyrene Features:High FlowIgnition ResistantNo Pre-drying RequiredHigh ImpactColors AvailableApplications:Injection MoldingDark ColorsTV CabinetsElectronic EquipmentInformation provided by US distributor Ca.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 60 PHR Suprex Clay Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | >= 15.2 MPa | >= 2200 psi | Stress at Elongation M100; ASTM D412 Method A |
Seals Eastern 7182B Fluorocarbon-Elastomer Formulated AFLAS® high-temperature, high-pressure "sour" oil & gas service. ED resistant. Excellent acid and base resistance.Information provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
Lubrizol Stat-Rite® S-102 Static Control Polypropylene Stat-Rite® S-102 is a static dissipative Polyethylene alloy. Stat-Rite® S-102 utilizes the patented Stat-Rite® inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD pr.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2"/min; ASTM D638 |
A. Schulman POLYAXIS® RLLP621 Flame Retardant, High Density Polyethylene Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | At 20 in/min; ASTM D1238 |
Borealis Superclean™ LR4201S Crosslinkable Polyethylene Insulation for Medium and High Voltage Power Cables Superclean LR4201S is a Superclean crosslinkable low density polyethylene (XLPE) for medium and high voltage power cable insulation. The formulation of LR4201S provides an optimum combination of go.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2"/min; ASTM D638 |
A. Schulman POLYAXIS® RLLP621 Flame Retardant, High Density Polyethylene Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2"/min; ASTM D638 |
A. Schulman POLYAXIS® RLLP621 Flame Retardant, High Density Polyethylene Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2 in per min; ASTM D638; Test specimens were injection molded by ASTM D1897. |
Chevron Phillips K-Resin® XK40 Styrene-Butadiene Copolymer, Sheet Grade Styrene-Butadiene CopolymerCustomer Benefits: XK40 is an extrusion grade SBC designed specifically for superior performance in blends with general purpose polystyrene. Compared to KK38, KX40 offers.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 50 mm/min cross speed; ASTM D638 |
DuPont™ Surlyn® PC100 Ionomer Resin, Highest Clarity, Sodium Surlyn® PC100 luxury molding resin is a "select" grade of Surlyn® 8920, controlled to achieve the highest possible optical clarity in molded perfume jars and caps. It complies with the provisions .. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
ExxonMobil LDPE LD 380BA Wire & Cable Low Density Polyethylene Resin (European Grade) Product Description: LD 380BA is a non-stabilized LDPE, designed for the production of Low Voltage power cable insulation using the two-step silane cross-linking technology. Sufficient antioxidant a.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | (2.0 in/min); ASTM D638 |
ExxonMobil LL 8360.29 Rotational Molding Resin Product Description: LL 8360 is a linear low density hexene copolymer designed to offer excellent processability along with outstanding dimensional control and low warpage. This resin is ideally sui.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2.0 in/min; ASTM D638 |
ExxonMobil LLDPE LL 8360.29 Linear Low Density Polyethylene Resin Product Description: LL 8360 is a linear low density hexene copolymer designed to offer excellent processability along with outstanding dimensional control and low warpage. This resin is ideally sui.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2.0 in/min; ASTM D638 |
ExxonMobil LLP8360.29 Rotational Molding Resin Product Description: LL 8360 is a linear low density hexene copolymer designed to offer excellent processability along with outstanding dimensional control and low warpage. This resin is ideally sui.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | chs 20 in/min; 50% elongation; ASTM D412 |
Diamond Polymers Softflex® 6538 Thermoplastic Elastomer Alloy, Clear Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 971 Wire & Cable Flexible PVC Matte-finish, CL2 jacket compound rated for 90°C applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 12770 Coax & Telecom Flexible PVC Non-lead stabilized, CATV and general purpose jacket with excellent low temperature properties.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 1280 Nat04 Plenum Flexible PVC Plenum-grade jacket for Category 5(+) applications with good low temperature properties. UL QMTM2 plenum cable compound component.Information provided by Georgia GulfGeorgia Gulf became Axiall Corp.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 8800 Moldings & Extrusions Flexible PVC General purpose extrusion compound designed for use in weatherstrips, screen spline and flexible gaskets.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 16780 Wire & Cable Flexible PVC 90C matte finish, vinyl elastomer.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 19730 Wire & Cable Flexible PVC Electrical grade 105°C rated vinyl elastomer compound suitable for SEO and SJEO insulation and jacket applications per UL 62.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporati.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 19732 Wire & Cable Flexible PVC Non-lead stabilized, electrical grade 105°C rated non-lead vinyl elastomer compound suitable for SEO and SJEO insulation and jacket applications per UL 62.Information provided by Georgia GulfGeorgi.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 20 PHR Iceberg Clay Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 60 PHR Suprex Clay Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |