Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering N80X Nitrile Rubber Self-lubricating, Nitrile Rubber, 75-85 °IRHD. Copolymer of acrylonitrile and butadiene. Special filler incorporated to enhance operation in dynamic sealing applications. ASTM & ISO designation = N.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q70B Polyurethane Rubber Peroxide cured, Polyurethane Rubber, 65-75 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG714, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasion resis.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q70W Polyurethane Rubber Peroxide cured, off-white Polyurethane Rubber, 65-75 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG714, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abra.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q80Y Polyurethane Rubber Peroxide cured, yellow Polyurethane Rubber, 75-85 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG814, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasio.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering R60D Natural Rubber Natural Rubber, 55-65 °IRHD. Formulated to Defence Standard 93-30, Type QX, Grade 60 (NRQX60).Applications: Natural rubber offers low compression set, high tensile strength, high resilience and ex.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering V80H Fluoroelastomer Compound Fluoroelastomer Rubber, 75-85 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Federal Food and Drug Adminis.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ASTM D638 |
NOVA Chemicals Sclair® 2316 LLDPE Injection Molding Resin Features: Low odor, low warpage, fast cycling, high surface gloss, permits light weight lid design.Data provided by the manufacturer. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ASTM D638 |
NOVA Chemicals Sclair® 2315 LLDPE Injection Molding Resin
(discontinued **) Features: Low odor, low warpage, fast cycling, high surface gloss, permits light weight lid design, low temperature impact excellent.Data provided by the manufacturer. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Huntsman PE1080 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with high clarity and excellent stiffness.Applications: Film extrusion: overwrapFDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Huntsman PE7076 Profile Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields parts with high gloss and excellent stiffness.Applications: Extrusion: profile extrusion.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 u.. |
|||
Tensile Strength, Yield | 14.0 - 32.0 MPa | 2030 - 4640 psi | Average value: 25.1 MPa Grade Count:55 |
Overview of materials for Polypropylene with 20% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Calcium Carbonate (CaCO3) Filler". Each property range of values reported is mini.. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa | 2030 - 5080 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 31008 PVDF Copolymer
(discontinued **) Key features of this grade: High Flexibility/ High Elongation/Cold Impact Resistance, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General .. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa | 2030 - 5080 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 32008 PVDF Copolymer
(Unverified Data**) Key features of this grade: High Flexibility/ High Elongation/Cold Impact Resistance, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General .. |
|||
Tensile Strength, Yield | 14.0 - 22.8 MPa | 2030 - 3300 psi | Average value: 18.9 MPa Grade Count:18 |
Overview of materials for Medium Density Polyethylene (MDPE), Molded This property data is a summary of similar materials in the MatWeb database for the category "Medium Density Polyethylene (MDPE), Molded". Each property range of values reported is minimum and maxim.. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 0.200 %, Temperature 1150 °C |
2030 psi @Strain 0.200 %, Temperature 2100 °F |
|
Haynes 214® alloy, hot rolled solution annealed plate 12.7 mm (1/2 in.) thick Intended principally for use at temperatures of 955°C and above, exhibits resistance to oxidation that exceeds virtually all conventional heat-resistant wrought alloys. Applications include mesh .. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa @Thickness 2.00 mm |
2030 - 5080 psi @Thickness 0.0787 in |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Features: Copolymer; Good Flexibility; Low ViscosityUses: Wire & Cable ApplicationsAdditional .. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP YI001 Polyester Elastomer (Europe-Africa-Middle East) LNP* LUBRICOMP* YI001 is a compound based on Polyester Elastomer containing Silicone. Added features include; Internally Lubricated. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP) LNP* THERMOCOMP* 2X00858 is a compound based on FEP resin containing proprietary fillers. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ISO 527-2 |
Borealis Bormed™ LE6609-PH LDPE for Pharmaceutical Blow Molding Bormed LE6609-PH is a LD-polyethylene produced in a high-pressure process intended for blow molding of soft and flexible packages for pharmaceutical products.Bormed LE6609-PH can be used in "blow-fi.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Trelleborg Horda Cable E8409 Easy Strippable Semiconductive Shielding E8409 is a vulcanizable, strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes.E8409 meets the requirements as be.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Trelleborg Horda Cable E8502 Strippable Semiconductive Shielding E8502 is a vulcanizing, strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes.E8502 meets the requirements as bel.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Eastman Eastman AP005 Copolyester Applications:Automotive componentsBreathable filmsElectrical/electronic componentsFilm ModificationFlexible hingesHose mandrelIndustrial componentsIndustrial hoses/beltsOffice furniturePackagingPoly.. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 100 % |
2030 psi @Strain 100 % |
ISO 527-1/-2 |
Covestro Desmopan® DP 3354D Polyurethane As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ISO 527 |
Eurostar Starflam MX05075 PP, Flame Retardant, Injection Molding Starflam MX05075 is an Unfilled Halogen Free Flame Retardant PP Injection Molding ResinInformation provided by Eurostar. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0437W40L Wollastonite Reinforced |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO 527 |
Breplast Bretene PP Polypropylene Composite Recovered polypropylene compositeInformation provided by Breplast S.p.A. |
|||
Tensile Strength, Yield | 14.0 MPa @Temperature 120 °C |
2030 psi @Temperature 248 °F |
ASTM Test |
BASF Ultramid® 8350 HS PA6 (Dry) Ultramid 8350 HS is a heat stabilized, impact modified type 6 graft copolymer developed for extrusion, tubing, and jacketing applications requiring a high level of toughness combined with a moderate.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Huntsman PE1076 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with high clarity and excellent stiffness.Applications: Film extrusion: overwrap packaging.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Huntsman PE1078 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with high clarity and excellent stiffness.Applications: Film extrusion: overwrap packaging.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (.. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C |
2030 - 5080 psi @Thickness 0.0787 in, Temperature 73.4 °F |
Type IV, 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Information provided by Solvay Specialty Polymers. |