Polymer Property : Tensile Strength, Yield = 10.3 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	10.3 MPa	1490 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable W7400 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne
Tensile Strength, Yield	10.3 MPa	1490 psi	ASTM D412
Precision Polymer Engineering H70B Epichlorohydrin Peroxide Cured, Epichlorohydrin Rubber, 65-75 °IRHD. Terpolymer of epichlorohydrin, ethylene oxide and an unsaturated monomer. ASTM and ISO designation = GECO.Applications: Excellent resistance t..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
Quadrant EPP Proteus® LDPE - Low Density Polyethylene (ASTM Product Data Sheet)
Tensile Strength, Yield	10.3 - 31.0 MPa	1500 - 4500 psi	ASTM D638
Alcoa KAMA 3000 High Impact Polystyrene (HIPS) (discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableMono-layer an..
Tensile Strength, Yield	>= 10.3 MPa	>= 1500 psi	ASTM D638
Alcoa KAMA AgriHIPS 3500 AgriHIPS (discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableSilicone coat..
Tensile Strength, Yield	10.3 MPa	1490 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman 1870A Polyethylene (discontinued **) Polyethylene 1870A is a low density formulation with excellent flow characteristics for injection molding. It is used for such applications as container closures that require stress-crack resistanc..
Tensile Strength, Yield	10.3 MPa	1500 psi	at 2% Offset; ASTM D638
ExxonMobil LD 503.LN Foams and Compounding Resin (discontinued **) LD 503.LN is a low density homopolymer specially designed for maximum performance in foam applications.Information provided by ExxonMobil Chemical
Tensile Strength, Yield	10.3 MPa	1500 psi	at 2% Offset; ASTM D638
ExxonMobil LD 641.LN Molding, Extrusion and Compounding Resin (discontinued **) LD 641.LN is a low density homopolymer specifically designed for high performance blow molding applications. This resin is suitable for applications requiring high melt strength, flexibility, good ..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
M. Holland Company LD500 LDPE (discontinued **) Features: High Clarity, High Flow, Narrow Molecular Wt. Dist., Good Processability, Warp ResistantUses: Drink LidsApprovals: FDA 21 CFR 177.1520(c) 2.2 and ASTM D 1248, I, Class A, Cat. 1Processing ..
Tensile Strength, Yield	10.3 - 252 MPa	1500 - 36500 psi	Average value: 104 MPa Grade Count:75
Overview of materials for Nylon 66, 10% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 10% Glass Fiber Filled". Specific grades with glass content between 5% and 14% are included. ..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
LyondellBasell PetrotheneÂ® NA217080 Low Density Polyethylene ApplicationsPETROTHENE NA 217-080 is a natural low density polyethylene resin formulated for use as primary insulation for coaxial and control cable applications. NA 217-080 has also been designed ..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
LyondellBasell PetrotheneÂ® NA951080 Low Density Polyethylene ApplicationsPETROTHENE NA 951-080 is designed for use as a base resin for compounding material including gas-injected or chemically expanded insulation. NA 951-080 is a natural, low density, medium..
Tensile Strength, Yield	10.3 MPa	1500 psi
Saint-Gobain RulonÂ® DC7035 Bearing/Seal PTFE Offers electrical conductivity in a low wear, self lubricating bearing material. This material is ideal in applications where static dissipation is needed. DC7035 is often used as a static bleed mec..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D412
Teknor Apex APEXÂ® 3201-60 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D412
Teknor Apex APEXÂ® 3310-65 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, RadiationUses-Automotive Applications, Food Service Applications, General Purpose, Med..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D412-92
Saint-Gobain Versilicâ„¢ SPX-50 High Strength Silicone Tubing Formulation Description: Versilicâ„¢ SPX-50: Peroxide-cured Versilicâ„¢ High-Strength Silicone Tubing is designed for use in applications where flexibility, resiliency and durability are required. Its s..
Tensile Strength, Yield	10.3 MPa	1490 psi	ASTM D412
Teknor Apex TELCAR® 1000-92 Thermoplastic Elastomer Information provided by Teknor Apex Company
Tensile Strength, Yield	10.3 MPa	1490 psi	2.0 in/min; ASTM D638
Teknor Apex Telcar® TL-1000-92-UV Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Automotive Spec..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman CP851 High Flow, Injection Molding Grade DescriptionCP 851 is a high flow injection molding grade of conventional (high pressure) low density polyethylene. ApplicationCP 851 meets the specifications in FDA Regulation 21 CFR177.1520 (c)3.1..
Tensile Strength, Yield	10.3 MPa	1490 psi
Zylog Hipolyene® 2703 MS Thermoplastic Polyolefin & PP Compound Information provided by Zylog Plastalloys Pvt. Ltd.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
ExxonMobil LLDPE L L6101RQ Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 6101 series are medium flow LLDPE grades, which offer excellent stiffness, heat distortion resistance and good environmental stress crack resistance. The excellent toughness ..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
ExxonMobil LLDPE LL 6101XR Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 6101 series are medium flow LLDPE grades, which offer excellent stiffness, heat distortion resistance and good environmental stress crack resistance. The excellent toughness ..
Tensile Strength, Yield	10.3 MPa	1490 psi	Molded property
Dow DOWLEX™ 2047A Linear Low Density Polyethylene, Cast Film Grade DOWLEX® 2047A Polyethylene resin is a cast film polymer for high performance stretch cling applications. It provides outstanding tear strength, impact strength and toughness. It complies with U.S. ..
Tensile Strength, Yield	10.3 MPa	1490 psi	Molded property
Dow DOWLEX™ 2247A Linear Low Density Polyethylene, Cast Film Grade DOWLEX® 2247A Polyethylene resin is a cast film polymer for applications requiring outstanding tear strength, impact strength and toughness. This material complies with U.S. FDA Regulation 21 CFR 1..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
Clariant Renol PA2SP0011HW Nylon 6, Heavyweight Compound Data provided by Clariant Masterbatches
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D-638
Axiall 8690 Moldings & Extrusions Flexible PVC General purpose extrusion compound designed for use in weatherstrips, screen spline and flexible gaskets.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D-638
Axiall 8770 Moldings & Extrusions Flexible PVC General purpose extrusion compound for weatherstrips, tubings and gaskets.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	10.3 MPa	1500 psi	1:1; ASTM D412
ACC EP JS EPI Engineered Polymers Joint Sealant EP JS Joint Sealant JS, “Powered by Reactamine® Technology” is a two component 100% solid (silicone optional) polyurea based joint sealant. EP JS is a self-leveling joint sealant designed to prot..
Tensile Strength, Yield	10.3 - 27.6 MPa	1500 - 4000 psi	ASTM D638
Alcoa KAMA 3202 Freezer Modified High Impact Polystyrene (discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableColors availa..
Tensile Strength, Yield	10.3 MPa	1500 psi	Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412
PolyOne Synprene® RT-4080 Thermoplastic Elastomer - SBC, Mineral Filled (discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerMineral FilledApplications:Multi-PurposeMarket:AutomotiveBuilding and ConstructionIndustrialConsumer GoodsProcessing Method:ExtrusionInforma..