Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | <= 9.50 MPa | <= 1380 psi | ISO/R527 |
Polykemi AB POLYelast TPE Z706 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 9.50 MPa | <= 1380 psi | ISO/R527 |
Polykemi AB POLYelast TPE Z706EX Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Tensile Strength at Break | 9.51 MPa | 1380 psi | ASTM D638 |
LG Chemical LC170 Polyolefin Elastomer for Polymer Modification Features: Improved impact strength in polypropylene; Excellent filler acceptance; Available as pellet form; Outstanding toughness with flexible performance; and Reduction of product weightApplicatio.. |
|||
Tensile Strength at Break | >= 9.50 MPa @Temperature 275 °C, Time 86400 sec |
>= 1380 psi @Temperature 527 °F, Time 24.0 hour |
|
Shandong Dongyue Shenzhou New Material Co DS2603 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc.. |
|||
Tensile Strength at Break | >= 9.50 MPa @Temperature 275 °C, Time 86400 sec |
>= 1380 psi @Temperature 527 °F, Time 24.0 hour |
|
Shandong Dongyue Shenzhou New Material Co DS2604 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc.. |
|||
Tensile Strength at Break | 9.51 MPa | 1380 psi | DCBP Cure |
Shin-Etsu Silicones SV-18000U Silicone Rubber SV18000U is one of a series of easy processing, mineral filled silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering. Product Fe.. |
|||
Tensile Strength at Break | 9.51 MPa | 1380 psi | DBPH Cure |
Shin-Etsu Silicones SV-18000U Silicone Rubber SV18000U is one of a series of easy processing, mineral filled silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering. Product Fe.. |
|||
Tensile Strength at Break | 9.50 MPa | 1380 psi | ASTM D638 |
UBE J2522 Polyethylene Description: UBE Polyethylene is polymerized at high pressure using a tubular reactor. Production conditions are strictly controlled ensuring the product's superior physical and mechanical prope.. |
|||
Tensile Strength at Break | 9.51 MPa | 1380 psi | Change in tensile strength after 18 hours at 250°F, in vegetable oil; ASTM D471 |
Teknor Apex Telcar® TL-8421 Thermoplastic Elastomer Notes: RoHS Compliant Uses: Appliance Wire Insulation; Appliance Wire Jacketing; Cable Jacketing; Connectors; Flexible Cord Jacketing; Industrial Cable Jacketing; Terminal Cable Jacketing; Undergrou.. |
|||
Tensile Strength at Break | 9.50 MPa | 1380 psi | ISO 37 |
ELASTO UK Dryflex® 5064-101 TPE, Modified Injection Molding Grade for Auto Mud Flaps The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. VTC Dryflex® 5064-101 is specifically designe.. |