Polymer Property : Tensile Strength at Break = 1020 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	7.03 MPa	1020 psi	ASTM D412
Multibase TPSiV™ 3040-60A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced..
Tensile Strength at Break	7.03 MPa @Temperature 23.0 °C	1020 psi @Temperature 73.4 °F	Die C2 hr; ASTM D412
PolyOne Dynaflex™ G7670-1 (Natural) Thermoplastic Elastomer (TPE) Dynaflex™ G7670-1 (Natural) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polyprop..
Tensile Strength at Break	<= 7.00 MPa	<= 1020 psi	ISO/R527
Polykemi AB POLYelast TPE ZS706 Thermoplastic Elastomer, SEBS/SBS-based Information provided by Polykemi AB
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
ICO Polymers ICOTEXâ„¢ 520-5004 1000 Micron EVA Powder Description: ICOTEX 520-5004 is an EVA powder that has been developed to meet the special requirements of the textile coating industry. Key Characteristics: good melt flow and flexibility and a viny..
Tensile Strength at Break	7.00 MPa	1020 psi	Dry
KratonÂ® NEXARâ„¢ MD9200 Polymer Barrier Membrane NEXARâ„¢ sulfonated block copolymer membranes are designed for water transport, filtration and separation. They have a high moisture vapor transportation rate, allowing usage in humidification a..
Tensile Strength at Break	7.00 MPa	1020 psi	ISO 527/2
Iran Petrochemical (PCC) 1922T Low Density Polyethylene LDPE 1922T - for injection molding with a balance between flow properties and mechanical propertiesApplications: toys, household articles, clamping lids.Information provided by Iran Petrochemical Co..
Tensile Strength at Break	7.00 MPa	1020 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL WCP761 PPE-TPE (Asia Pacific) Flexible Noryl injection molding grade. Low specific gravity with very good non-halogenated flame retardant performance. Developed for evaluation in overmolding applications such as plugs, strain re..
Tensile Strength at Break	7.00 MPa	1020 psi	ISO 527
SABIC Innovative Plastics LNP STAT-LOY M3000 PP LNP STAT-LOY* M3000 is a compound based on unfilled Polypropylene resin. Added feature of this material is: Antistat.
Tensile Strength at Break	7.03 MPa	1020 psi	ASTM D412
Teknor Apex Uniprene® UN-7010-73NT Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Gaskets; Glazing; Grommets; Medical Pump Seals; Medical/Healthcare Applications; Plugs; Shock Absorbing Pads; Tubing Agency Ratings: NSF 61 Forms: Pellets Processin..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
ELASTO UK Dryflex® 502600S SEBS Based Material, Unfilled Qualities, 60A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
ELASTO UK Dryflex® 600650S SEBS Based Material, Filled Qualities, 65A Hardness, Natural The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
ELASTO UK Dryflex® 602600S SEBS Based Material, Filled Qualities, 60A Hardness, Black The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
ELASTO UK Dryflex® 660650S SEBS Based Material, Semi-Filled Qualities, 65A Hardness, Natural The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Tensile Strength at Break	7.03 MPa	1020 psi	Across Flow; ASTM D412
ExxonMobil Santoprene® 171-64 Thermoplastic Elastomer A soft, black, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated use, as well as those..
Tensile Strength at Break	7.03 MPa	1020 psi	Across Flow; ASTM D412
ExxonMobil Santoprene® 8211-75 Thermoplastic Elastomer A soft, colorable, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in dif..
Tensile Strength at Break	7.00 MPa	1020 psi	ISO R 527
Fainplast Compounds GS 55/T Flexible PVC, Injection Molding for Footwear Soles
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
Arkema Group LOTRYL® 28 MA 07 Copolymer Ethylene - Methyl Acrylate LOTRYL® 28 MA 07 is a random copolymer of ethylene and methyl acrylate made by high-pressure radicalar polymerisation process. Due to the high methyl acrylate content, LOTRYL® 28 MA 07 is a polyme..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
Azdel SuperLite® SL551800-100 PP Resin Matrix / 55% Glass Fiber (10 mm Molded Thickness) AZDEL SuperLite® SL551800-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic..
Tensile Strength at Break	7.00 - 10.0 MPa	1020 - 1450 psi	ISO 527-1
Adamas Adalon® 452 PTFE, Mica filler Information provided by Adamas, HPM
Tensile Strength at Break	7.00 MPa	1020 psi	ISO 527-1
Barlog Plastics KEBAFLEX SG 65 A.01 TPE-S, Shore A65, natural TPE-SInformation provided by BARLOG plastics GmbH.
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
Arkema Group EVATANE® 40-55 Copolymer Ethylene - Vinyl Acetate EVATANE® 40-55 is a random copolymer of Ethylene and Vinyl Acetate made by high-pressure radicalar polymerisation process. It’s stabilized with antioxidants and contains slip and antiblock additiv..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
Petroquimica Triunfo Trithene® JX 7300 LDPE - Injection Molding The Trithene® JX 7300 resin is a low-density polyethylene (LDPE) with outstanding flow ability and flexibility. Those attributes are especially important to meet the requirements for fast injection..
Tensile Strength at Break	7.00 MPa	1020 psi	ASTM D638
Azdel SuperLite® SL551400-100 PP Resin Matrix / 55% Glass Fiber (8 mm Molded Thickness) AZDEL SuperLite® SL551400-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic..
Tensile Strength at Break	7.03 MPa	1020 psi	Across Flow; ASTM D412
ExxonMobil Santoprene® 101-64 Thermoplastic Elastomer Product Description: A soft, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for..