Polymer Property : Tensile Strength at Break = 34.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	34.0 MPa	4930 psi
Plastcom SLOVALEN PH 78 T 40 PP, 40% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 40% microground, floated, chemically modified talc. Stable towards detergents. General application in all industry branches..
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics Cycolac® MG8000SR ABS This data was supplied by SABIC-IP for the Americas region.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics GELOY CR7020 ASA (Asia Pacific) ASA copolymer. Profile/sheet coextrusion over ABS. Excellent weatherability, good flow/aesthetics and high impact.
Tensile Strength at Break	<= 34.0 MPa	<= 4930 psi	ISO/R527
Polykemi AB POLYfill PPH T15020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB
Tensile Strength at Break	<= 34.0 MPa	<= 4930 psi	ISO/R527
Polykemi AB POLYfill PPH T16020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics GELOY CR7520 ASA General purpose ASA. Excellent weatherability, good flow/aesthetics and high impact. Rated F2 by UL.
Tensile Strength at Break	34.0 MPa	4930 psi	ISO R 527
Fainplast Compounds RK 115 Rigid PVC, Extrusion Lead Free Small tubes for shoes
Tensile Strength at Break	34.0 MPa	4930 psi	ISO R 527
Fainplast Compounds RK 316 Rigid PVC, Extrusion Lead Free Indoor profiles
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 37
Huntsman AVALONÂ® 98 AE Thermoplastic Polyurethane Introduction: AVALON 98 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 98 AE is part of the AVALON Perform Range and offers a premium soiling materi..
Tensile Strength at Break	34.0 MPa @Temperature 23.0 Â°C	4930 psi @Temperature 73.4 Â°F	50-mm/min; ISO 527
Ineos ABS LustranÂ® Guardianâ„¢ 682 ABS, Injection Molding Grade LustranÂ® ABS 682 is a high performance, HCFC-141b resistant grade of ABS for injection molded refrigerator and freezer components.
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 37
Huntsman AVALONÂ® 92 AB Thermoplastic Polyurethane Introduction: AVALON 92 AB is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 92 AB is part of the AVALON Performance Range and offers a premium soling ma..
Tensile Strength at Break	34.0 MPa @Temperature 23.0 Â°C	4930 psi @Temperature 73.4 Â°F	50mm/min; ISO 527-2/1A/50
SYNTHOS ForsanÂ® 573 Acrylonitrile Butadiene Styrene (ABS) Increased heat resistant, glossy, good mechanical properties, suitable for electroplating.Applications: Electrotechnics, automotiveHousehold appliances, electric switches, car interior parts, profil..
Tensile Strength at Break	34.0 MPa	4930 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Lubricomp KZL34 POM LNP* Lubricomp* KZL34 is a compound based on Acetal resin containing Milled Glass and PTFE. Characteristic of this grade is Internally Lubricated.This data was supplied by SABIC-IP for the Americas..
Tensile Strength at Break	>= 34.0 MPa	>= 4930 psi	ISO R 527
Stir SpA Giesse RJA/9 (PVC) Application: Injection moldingInformation provided by STIR SpA
Tensile Strength at Break	34.0 MPa	4930 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Thermocomp FF008L PE LNP* Thermocomp* FF008L is a compounding based on Polyethylene containing glass fiber. Added characteristics include Low Extractible.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength at Break	34.0 MPa	4930 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL PPX PPX7112 PPE+PP (Europe-Africa-Middle East) PPE+PP blend. Suitable for painted exterior automotive applications.
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL PPX PPX7115 PPE+PP High modulus/impact/heat PPE+PP
Tensile Strength at Break	34.0 MPa	4930 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP MF002AS PP LNP THERMOCOMP* MF002AS is a compound based on Polypropylene resin containing 10% Glass Fiber. Added features of this material include: Heat Stabilized.
Tensile Strength at Break	34.0 MPa	4930 psi	67% Ret.
UBE UBESTA® 3030U Nylon 12 (After Ethanol for 1000 hours) Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527
Unitika TERRAMAC TE-1070 Polylactic Acid (PLA) High-Impact grade, Injection grade. Bio-based materials produced from annually renewable raw materials.Information provided by Unitika Ltd.
Tensile Strength at Break	34.0 MPa	4930 psi	ASTM D638
Eastman Tenite 572E3720012 Cellulose Acetate Butyrate, Clear, Trsp Applications:FilmsProfilesSheetProduct Description: Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a wa..
Tensile Strength at Break	34.0 MPa	4930 psi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® BM-30 FR PA6-MD30 FR Information provided by EMS Grivory
Tensile Strength at Break	34.0 MPa	4930 psi
AorTech Biomaterials ECSil™ 90A Biomedical Carbonate Silicone Pellets Elast-Eon™ Carbonate Silicone (ECSil™) is a family of next generation biomedical polymers. ECSil™ is finding strong interest in cardiac pacing leads, orthopaedics, spinal discs, and generally an..
Tensile Strength at Break	34.0 MPa	4930 psi	Sintered Sheet; DIN EN ISO 527-3
3M Dyneon™ TFM™ 2001Z PTFE Dyneon™ TFM™ 2001 Z PTFE is an ideal grade for high-performance applications with reduction ratios up to 1000:1. This product has a denser polymer texture providing lower gas permeability than sta..
Tensile Strength at Break	34.0 - 55.0 MPa	4930 - 7980 psi	ASTM D638
Arkema Group KYNAR® 760 Polyvinylidene Fluoride Homopolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili..
Tensile Strength at Break	34.0 MPa	4930 psi	ASTM D1457
Asahi Glass Fluon® CD090 PTFE Coagulated Dispersion Powder Fluon®PTFE coagulated dispersion powders (fine powders) are used for paste extrusion to make tapes, tubes, rods and wire coatings.Information provided by Asahi Glass Company, Inc.
Tensile Strength at Break	34.0 - 40.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C	4930 - 5800 psi @Thickness 0.0787 in, Temperature 73.4 °F	Type IV, 50 mm/min; ASTM D638
Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF) (Unverified Data**) Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Information provided by Solvay Specialty Polymers.
Tensile Strength at Break	34.0 MPa	4930 psi	Sintered Molding; DIN 53455 (film, 0.2mm)
3M Dyneon™ TFM™ 1630 PTFE (discontinued **) Semi-free-flowing resin for convenient handlingHigh bulk density leading to more economical processingVery dense polymer structure; low permeabilityGood electrical and mechanical propertiesSmoother ..
Tensile Strength at Break	34.0 MPa	4930 psi	Sintered Molding; DIN 53455 (film, 0.2 mm)
3M Dyneon™ TFM™ X 1630 PTFE (discontinued **) Semi-free-flowing resin for convenient handlingHigh bulk density leading to more economical processingVery dense polymer structure; low permeabilityGood electrical and mechanical propertiesSmoother ..
Tensile Strength at Break	34.0 MPa	4930 psi	ASTM D638
Azdel SuperLite® SL551400-100 PP Resin Matrix / 55% Glass Fiber (3 mm Molded Thickness) AZDEL SuperLite® SL551400-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic..