Polymer Property : Tensile Strength at Break = 16.5 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable WJLC32L Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT2500-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural Applications: Air DamsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT2500-01A Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Air DamsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT2500-594UV Thermoplastic Polyolefin, UV Stabilized, 9428NM Spectra Grey Applications: Air DamsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT3150-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Air deflectorsUnderhood componentsBumper componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT7012-707UV Thermoplastic Polyolefin, UV Stabilized, 848 Black Applications: Bodyside moldings and claddingsFacia and bumper coversExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products UVFT2500-01 Thermoplastic Polyolefin, 90K Flexural Modulus, UV Stabilized, Black Applications: Air damsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2390 psi	ASTM D638
S&E Specialty Polymers TufFill NH™ 2102A PP, Flame Retardant Application: A polypropylene based, zero halogen, flame retardant compound with antistatic properties designed for packaging applications.Information provided by S&E Specialty Polymers
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A8501 Polyvinyl Chloride, Flexible (PVC, Flexible) Recommended for interior applications.Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A85UB Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible P1500 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible 86479 Tran Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible B8502 Polyvinyl Chloride, Flexible (PVC, Flexible) A flexible PVC Compound with good resistance to migration to specific applications.Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R323AE Polyvinyl Chloride Elastomer (PVC Elastomer) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D4894
3M Dyneon™ CC646/S Custom Compound (discontinued **) This compound consists of a mixture of 60% bronze blended with PTFE.Information provided by Dyneon, A 3M Company
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
ITW Devcon FlexaneÂ® Rubber Repair / Castable Urethane Fast Cure, Black Information provided by ITW Devcon
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex APEXÂ® 2075-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-ClearForms-PelletsProcessing Method-Extrusi..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D638
Teknor Apex APEXÂ® 4124 Polyvinyl Chloride, Flexible Notes: 75Â°C Jacket; RoHS Compliant Features: Good UV Resistance; Sunlight Resistant (720 hours) Uses: Appliance Wire Jacketing; Irrigation Cable Jacketing Forms: Pellets Wire Types: UL Style 2464..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D638
Teknor Apex APEXÂ® 80328-Y Polyvinyl Chloride, Flexible Notes: 75Â°C Insulation; RoHS Compliant Features: Sunlight Resistant (720 hours) Uses: Cable Jacketing; InsulationAgency Ratings: UL QMTT2 .E73402 Forms: Pellets Wire Types: TWInformation Provided..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D638
Teknor Apex APEXÂ® 80842 Polyvinyl Chloride, Flexible Notes: 105Â°C Jacket; RoHS Compliant Features: High Heat Resistance; Sunlight Resistant (720 hours) Uses: Outdoor Applications; Wire and Cable Applications; Wire Jacketing Agency Ratings: UL Qmtt2..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex Telcar® TL-1017A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex Telcar® TL-1154A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex Telcar® TL-2478K Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets ..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex Telcar® TL-8451 Thermoplastic Elastomer Notes: RoHS Compliant Uses: Appliance Wire Insulation; Appliance Wire Jacketing; Cable Jacketing; Connectors; Flexible Cord Jacketing; Industrial Cable Jacketing; Terminal Cable Jacketing; Undergrou..
Tensile Strength at Break	16.5 MPa	2400 psi	Molded and tested in accordance with ASTM D4976; ASTM D638
Dow FLEXOMER™ GRSN-1539 NT 7 Very Low Density Polyethylene (VLDPE) Resin FLEXOMER™ GRSN-1539 NT 7 is an ethylene-butene copolymer produced via gas phase polymerization from Dow. It can be utilized in monolayer and co-extruded films and in blends with other polyolefins ..
Tensile Strength at Break	16.5 MPa	2390 psi	ISO 37
Alliance Polymers Viprene™ P55D-22U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ P55D-22U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac..
Tensile Strength at Break	16.5 MPa	2390 psi	ASTM D412
3M Scotch® 31 Heavy Duty Mining Tape Scotch® Heavy Duty Mining Tape 31 has a tough, abrasion-resistant backing for jacket repair on mining cables. Due to extremely abrasive environment, the original jacket on the cable gets damaged of..
Tensile Strength at Break	16.5 MPa	2400 psi	Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C
3M Dyneon™ FE 5643Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5643Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu..
Tensile Strength at Break	16.5 MPa	2390 psi
3M MDT Tubing 3M MDT Tubing offers increased flexibility in combination with excellent abrasion, corrosion and environmental resistance properties and meets MIL-DTL-23053/15, Class 2. Uncoated product (without se..
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Syncure™ S1060A Polyethylene, Crosslinked (XLPE) Moisture Crosslinkable Polyethylene Compound. Available as Base Resin component for PolyOne Syncure System.Tensile, Elongation, Deformation, Hot Creep, and Gel measured on a 95 phr S1060A / 5 phr S1..