Polymer Property : Tensile Strength at Break = 15.2 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	15.2 MPa	2200 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable JJX20A Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne
Tensile Strength at Break	15.2 MPa @Temperature 23.0 °C	2200 psi @Temperature 73.4 °F	Die C2 hr; ASTM D412
PolyOne OnFlex™ HFFR 310-01 Thermoplastic Elastomer (TPE) OnFlex™ HFFR 310-01 is a non-halogen flame retardant material designed for cable jackets. New Product. Commercial specifications have not been established. - Non-halogen flame retardant - UL62 comp..
Tensile Strength at Break	15.2 MPa	2200 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible B87FB Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	15.2 MPa	2200 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R208AE Polyvinyl Chloride + NBR (PVC+NBR) Information provided by PolyOne
Tensile Strength at Break	15.2 MPa	2200 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R9788A Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D4894
3M Dyneon™ CCM605 PTFE, 25% Glass Filled (discontinued **) Type II, free flowing.Typical Applications: Finished or semi-finished parts: sheets, rods, tubes, billets for skiving of films or machining into complex shapes.Information provided by the Dyneon div..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D638
LyondellBasell PetrotheneÂ® GA808093 Linear Low Density Polyethylene ApplicationsPETROTHENE GA 808-093 is a broad molecular weight, linear low density polyethylene resin designed for use as a wire and cable insulation. An antioxidant package is added to ensure therm..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D638
LyondellBasell PurellÂ® PE3020D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrusion Blow Molding Purell PE 3020 D is a low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. Target markets are small blow molding including packagi..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D1414
Greene Tweed CHEMRAZÂ® E38 Perfluoroelastomer ChemrazÂ® E38 was specifically developed for high-density plasma systems and diffusion processes where seal reliability and very minimal contamination are essential. The material provides excelle..
Tensile Strength at Break	15.2 MPa	2200 psi
Taiwan PU Corporation CPU-69-A/B Mixing Ratio 100/42 Polyurethane Casting Elastomer Compound of CPU-69-A/B with a mixing ratio of 100/42.Information provided by Taiwan PU Corporation.MatWeb has a separate entry for the unmixed A nd B components.
Tensile Strength at Break	15.2 MPa	2200 psi	ISO R 527
Stir SpA AF 80 3 GEC (PVC) Application: Insulation CEI 20-11 type TI 1 low acid fumes emissionInformation provided by STIR SpA
Tensile Strength at Break	15.2 MPa	2200 psi	ISO R 527
Stir SpA SR 90 CZ (PVC) Application: Extrusion insulation CEI 20-11 type TI-1Information provided by STIR SpA
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D638
Teknor Apex APEXÂ® CX 2001-84 Polyvinyl Chloride, Flexible Notes: RoHS Compliant Features: Flame Retardant Uses: Cable Jacketing; Coaxial Cable Jacketing Agency Ratings: UL 444; UL 62Processing Method: Extrusion Forms: Pellets Additional Information: Temper..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D412
Teknor Apex MF 569 Polyvinyl Chloride, Flexible Film Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Film, Medical Applications Forms-PelletsInformation provided by Teknor Apex Company
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D412
Teknor Apex MonpreneÂ® MP-2100-S-L3 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D412
Teknor Apex MF 181 NT Polyvinyl Chloride, Flexible Film Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Film, Medical Applications Forms-PelletsAppearance-ClearAgency Ratings- FDA Unspecified RatingInformatio..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D412
Teknor Apex Telcar® TL-88-N809C Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D412
Teknor Apex Uniprene® UN-2678C Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex..
Tensile Strength at Break	15.2 MPa	2200 psi	Across Flow; ASTM D412
ExxonMobil Santoprene® 121-87 Thermoplastic Elastomer A hard, black, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ran..
Tensile Strength at Break	15.2 MPa	2200 psi	Transverse to Flow; ASTM D882
Diamond Polymers NPP10-0218 Low Density Polyethylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D638
Americas Styrenics STYRON A-TECH® 1290 High Impact Polystyrene Product CharacteristicsEasy processingGood impact resistanceESCRFood Contact CompliantUL Classification 94HBTypical ApplicationsCreamer and yot containersExtrusion/ thermoformingInformation provided..
Tensile Strength at Break	15.2 MPa	2200 psi	Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C
3M Dyneon™ FLS 2530 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FLS 2530 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu..
Tensile Strength at Break	15.2 MPa	2200 psi	ASTM D412
Teknor Apex Monprene® MP-1878 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo..