- HOME
- POLYMER SEARCH
- Polymer Property : Izod Impact, Notched = 7.50 J/cm
Polymer Property : Izod Impact, Notched = 7.50 J/cm Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Premix Premi-Glas® 2200-25 CR-SX Fiberglass Reinforced SMC
Description: Premi-Glas® 2200-25 CR-SX is a fiberglass reinforced thermoset Sheet Molding Compound formulated for excellent electrical properties and fire retardance; it also has very good thermal ..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Premix Premi-Glas® 2203-25 CR-SX-HT Fiberglass Reinforced Thermoset SMC
Premi-Glas® 2203-25 CR-SX-HT is a fiberglass reinforced thermoset sheet molding compound for electrical and flame retardant applications.Key features and benefits are:Enhanced product for higher UL..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | |
|
Owens Corning Glass Fiber Reinforced Polyester (Spray-up/Lay-up), 30 wt.% glass
Data provided by the manufacturer, Owens Corning.
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Premix Premi-Glas® 2205-25 CR-SX Fiberglass Reinforced SMC
Description: Premi-Glas® 2205-25 CR-SX is a fiberglass reinforced thermoset Sheet Molding Compound formulated for excellent electrical properties and fire retardance; it also has very good thermal ..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Premix Premi-Glas® 3200-25 Fiberglass Reinforced SMC
Description: Premi-Glas® 3200-25 is a fiberglass reinforced thermoset Sheet Molding Compound formulated for excellent electrical properties and fire retardance; it also has very good thermal and di..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Cycoloy® RCY6713 PC (Asia Pacific)
Cycoloy* RCY6713 resin is an injection moldable high heat PC blend with non-brominated and non-chlorinated flame retardant. It contains 30% post consumer recycle content with a UL-94 V0 rating @ 1.5..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics GELOY HRA170D ASA+PC (Europe-Africa-Middle East)
GELOY HRA170D resin is a PC-ASA blend with permanent antistatic behavior. It is typically used in applications that require antidust properties and high impact retention. Geloy HRA170D resin is typi..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Lexan® LUX2614G PC (Asia Pacific)
Lexan LUX2614G (EXRL0944) is a diffusive, high viscosity, uv stabilized, flame retardant polycarbonate with improved light transmission and providing good colorstability under heat exposure. Develop..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Lexan® PK2870 PC
LEXAN* PK2870 polycarbonate resin, global grade, MVR (300C/1.2kg) 2 cm3/10min, high viscosity, branched, blow molding, high melt strength, high impact resistance, Available in transparent colors onl..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Lexan® PK2870 PC (Europe-Africa-Middle East)
LEXAN* PK2870 polycarbonate resin, global grade, MVR (300C/1.2kg) 2 cm3/10min, high viscosity, branched, blow molding, high melt strength, high impact resistance, Available in transparent colors onl..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Rostone Rosite® 3950ES SMC Thermoset Polyester, 25% Glass Reinforced
(discontinued **)
Key Features: High Strength; High DielectricElectrical grade material that provides higher flexural and impact strength than Rosite 3550 composites with comparable glass fiber content. 3950ES is fo..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | Reverse notched; ASTM D256 |
|
LG Chemical LUCEL N115 POM, Unreinforced, High Viscosity
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Xenoy® HX5600HP PBT+PC
Xenoy HX5600HP is PBT based semi-crystalline blend with balanced flow and impact properties. Improved chemical resistance against lab disinfectants and chemicals for healthcare enclosure and housing..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Xenoy® HX5600HP PBT+PC (Asia Pacific)
Xenoy HX5600HP is PBT based semi-crystalline blend with balanced flow and impact properties. Improved chemical resistance against lab disinfectants and chemicals for healthcare enclosure and housing..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Xenoy® HX5600HP PBT+PC (Europe-Africa-Middle East)
Xenoy HX5600HP is PBT based semi-crystalline blend with balanced flow and impact properties. Improved chemical resistance against lab disinfectants and chemicals for healthcare enclosure and housing..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Xenoy® X4810 PBT+PC (Europe-Africa-Middle East)
Xenoy X4810 is a hydrostable, High Modulus Ductile PC/PBT blend. This resin provides low temperature (below 0C) ductile impact behaviour, high chemical resistance, very low creep, low CTE, excellent..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics LNP THERMOCOMP DX11354 PC (Asia Pacific)
This is a PC compound with good plating, surface and mechanical performance, a good candidate for Laser Direct Structuring applications.
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Temperature 23.0 °C
|
14.1
ft-lb/in <br>@Temperature 73.4 °F
|
ASTM D256 |
|
Styron CALIBREâ„¢ 201-22 Polycarbonate Resin
Overview: CALIBREâ„¢ 201-22 polycarbonate resins are produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. They provide excellent impact resistanc..
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Temperature 23.0 °C
|
14.1
ft-lb/in <br>@Temperature 73.4 °F
|
ASTM D256 |
|
Styron CALIBREâ„¢ 203-22 Polycarbonate Resin
Overview: CALIBREâ„¢ 200-22 polycarbonate resins are produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. They provide excellent impact resistanc..
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Temperature 23.0 °C
|
14.1
ft-lb/in <br>@Temperature 73.4 °F
|
ASTM D256 |
|
Styron CALIBREâ„¢ 2061-22 Polycarbonate Resin
Overview: CALIBREâ„¢ 2061-22 resin is suitable for steam and ethylene oxide sterilization required by the health care industry. CALIBRE 2061-22 provides exceptional clarity, heat resistance, impa..
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Thickness 3.20 mm,<br> Temperature 23.0 °C
|
14.1
ft-lb/in <br>@Thickness 0.126 in,<br> Temperature 73.4 °F
|
Injection Molded; ASTM D256 |
|
Styron EMERGEâ„¢ 9500CR Polycarbonate (PC) / Polyethylene Terephthalate (PET)
Overview: EMERGEâ„¢ PC/PET 9500 CR advanced resin is a polycarbonate blend with excellent chemical resistance and ignition resistance properties. This grade was designed for use in medical equipm..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
SABIC Innovative Plastics Xenoy® X4810 PBT+PC (Asia Pacific)
Xenoy X4810 is a hydrostable, High Modulus Ductile PC/PBT blend. This resin provides low temperature (below 0C) ductile impact behaviour, high chemical resistance, very low creep, low CTE, excellent..
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Temperature 23.0 °C
|
14.1
ft-lb/in <br>@Temperature 73.4 °F
|
ASTM D256 |
|
Styron CALIBREâ„¢ 200-23 Polycarbonate Resin
Overview: CALIBREâ„¢ 200-23 polycarbonate resins are produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. They provide excellent impact resistanc..
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Temperature 23.0 °C
|
14.1
ft-lb/in <br>@Temperature 73.4 °F
|
ASTM D256 |
|
Styron CALIBREâ„¢ 302EP-22 Polycarbonate Resin
Overview: CALIBREâ„¢ 300EP-22 Series are polycarbonate resins that offer exceptional impact resistance, heat distortion resistance and optical clarity for injection molding applications. Their hi..
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Engineered Plastics EPPC 1214C Polycarbonate
Clear injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation.
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Engineered Plastics EPPC 1514G Polycarbonate
Gray injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation.
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Engineered Plastics EPPC 1714C Polycarbonate
Clear injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation.
|
|||
| Izod Impact, Notched |
7.50
J/cm <br>@Thickness 3.17 mm
|
14.1
ft-lb/in <br>@Thickness 0.125 in
|
ASTM D256 |
|
Covestro Makroblend® EL 703 Polycarbonate + Polyester-based Blend, Impact Modified, Flame-Retardant, UV Stabilized
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Engineered Plastics EPPC 2214C Polycarbonate
Clear injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation.
|
|||
| Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
|
Ashley Polymers Ashlene® 1061R Polycarbonate
A general purpose polycarbonate, low melt flow for injection molding.Data provided by the manufacturer
|
|||
Copyright © lookpolymers.com All Rights Reserved