Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC PP 5707N Polypropylene Homopolymer STIFFPACT for Injection Molding Product Description: PP 5707N is a reactor PP homopolymer grade with antistatic and nucleated agents. It is suitable for producing injection molded applications and gives consistent processability.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
NatureWorks® Ingeo™ AW 300D Injection Grade Biopolymer Specifically designed for use in injection molded food serviceware applications. This opaque, off-white molding grade creates parts that are rigid and heat resistant for tableware used with hot food.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256A |
LyondellBasell Pro-fax PF511 Polypropylene Homopolymer, Radiation Resistant Primary Processing Method: Injection MoldingKey Features: high melt flow, radiation-resistant polypropylene homopolymer resin, excellent retention of physical properties and color after radiation st.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
Kaneka PHBH Rigid Bio-based Polymer A copolymer produced of 3-hydroxybutyrate and 3-hydroxyhexanoate produced by fermentation of plant oils. It has excellent biodegradability (under anaerobic, aerobic, aquatic, and compost conditions.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
Kostat G148BK TAB Spacer Reels KOSTATs TAB Spacer Reels are ideal for shipment and storage of any components packaged in TAB spacer tapes. KOSTATSs TAB Spacer Reels, uniquely formulated and manufactured with the most advanced in.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRICOMP HH0420A PA11 LNP* HH0420A is a compound based on Nylon 11 containing proprietary fillers. Added features of this material are High Specific Gravity. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRICOMP IFL21 PA6.12 LNP LUBRICOMP* IFL21 is a compound based on Nylon 6/12 resin containing 5% Glass Fiber, 10% PTFE. Added features of this material include: Wear Resistant. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRICOMP IN001 PA6.12 LNP* LUBRICOMP* IN001 is a compound based on Nylon 6/12 resin containing 2% Moly. Added feature of this grade is: Wear Resistant. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRICOMP UX06425 PPA LNP* LUBRICOMP* UX06425 is a compound based on Polyphthalamide (PPA) containing 10% Glass Fiber, 10% PTFE. Added features of this material include: Wear Resistant, Hot Water Moldable and Heat Stab.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP THERMOCOMP HH0420A PA11 LNP* THERMOCOMP* HH0420A is a compound based on Nylon 11 containing proprietary fillers. Added features of this material are High Specific Gravity. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
Sumitomo Bakelite North America Epiall® 1904B-1 Short Glass Fiber Reinforced Epoxy Epiall 1904B-1 is a short fiberglass reinforced epoxy molding compound, with excellent dimensional stability, good strength properties and good electrical insulation properties.Information provided .. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256A |
Sumitomo Bakelite North America FS-10-VO-P Short-Glass Reinforced Diallyl Phthalate Isophthalate DAP Resin Isomer. Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Meets the requirements of ASTM D5948 Type SI.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
Plenco 7556 Phenolic, Briquette, Transfer Molded PLENCO 07556 is a glass fiber reinforced novolac phenolic molding compound, with good physical strengths and heat resistance along with excellent dimensional stability. UL recognized under component.. |
|||
Izod Impact, Notched | 0.330 J/cm | 0.618 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP STAT-KON OE002 PPS - LINEAR LNP* STAT-KON* OE002 is a compound based on PPS - Linear resin containing 10% Carbon Fiber. Added feature of this material is: Electrically Conductive. |
|||
Izod Impact, Notched | 0.330 J/cm @Temperature 23.0 °C |
0.618 ft-lb/in @Temperature 73.4 °F |
ASTM D256A |
Braskem H 401 Cast Film Extrusion Polypropylene Description: H 401 is a medium melt flow rate homopolymer polypropylene, additived with slip and antiblocking agents. Designed specially for cast film. This product features good impact strength, ex.. |