Polymer Property : Charpy Impact, Notched = 10.9 ft-lb/in² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Cycolac® HMG94MD ABS Superior flow, injection molding ABS for medical applications. Good impact. For thin-wall applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable.
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Cycolac® MG94U ABS High flow, UV stabilized ABS molding grade
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179/1eA
Nilit FRIANYL B63 S20 Nylon 6 for injection molding Nylon 6 for injection molding, impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179/1eA
Iran Petrochemical (PCC) EX 2 S HF 7750 M2 High Density Polyethylene EX2S is a high density polyethylene with 1-Butene as co monomer. It is medium molar mass, low density grade with a narrow molar mass distribution, high rigidity, good tear strength. Applications: ..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179/1eA
Iran Petrochemical (PCC) EX 3 - 80 High Density Polyethylene EX3-80 is a high density polyethylene with 1-Butene as co monomer. It is natural, good ESCR, good impact strength, tough and rigid pipe resin. Applications: pipe extrusion PE 80 class, industrial a..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179 1eA
Lehmann & Voss LUVOCOMÂ® 100-7846 Thermoplastic polyurethane, with aramid reinforcement Applications: Improved friction and wear behaviour. Emergency running property.dynamic stressBearings, sleeves, sliding elements, chair rollers, handles.Information provided by Lehmann & Voss & Co.K..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	80104mm, Cut; ISO 179/1eA
SABIC Innovative Plastics ValoxÂ® V8030CS PBT+PET Glass filled Valox with enhanced surface
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics XenoyÂ® IQ4840 PBT+PC (Asia Pacific) Xenoy iQ4840 (PBT+PC) resin is an environmental responsible, sustainable, and low carbon footprint resin. It is a 10% mineral filled resin with high modulus and ductile (HMD) characteristics. Xen..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics XenoyÂ® IQ4840 PBT+PC (Europe-Africa-Middle East) Xenoy iQ4840 (PBT+PC) resin is an environmental responsible, sustainable, and low carbon footprint resin. It is a 10% mineral filled resin with high modulus and ductile (HMD) characteristics. Xen..
Charpy Impact, Notched	2.30 J/cmÂ²	10.9 ft-lb/inÂ²	ISO 179/2C
SABIC Innovative Plastics ValoxÂ® IQ357U PBT+PC (Europe-Africa-Middle East) Valox* Resin IQ357U: Environmentally responsible, low carbon footprint iQ* PBT + PC alloy. UL94 V-0 @0.63 mm. Impact modified and UV stabilized resin.
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179/1eA
Borealis Nepol™ GB303HP 30% Long Glass Fiber Reinforced Polypropylene Nepol GB303HP is a 30% long glass fiber reinforced polypropylene grade, produced using Borealis ` propriety and exclusive, patented Nepol technology intended for injection molding and extrusion. Th..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²
Corbion Purac Blend C High Heat, Impact Modified Homopolymer PLA Heat resistance higher than typical PLA is achieved by addition of a nucleating agent and PDLA homopolymer. Increased impact is produced by addition of impact modifier to the base grade; a small am..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Bayer Test
Covestro Baydur® 730 IBS Polyurethane Structural Foam RIM, Density 40 pcf, MDI-based 2-Component Liquid System 0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience ..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179/1eA
DuPont Performance Polymers Delrin® 100T BK602 Acetal (POM) (Unverified Data**) Toughened High Viscosity Acetal Homopolymer Delrin 100T BK602 is a toughened high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where o..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	50%RH; ISO 179/1eA
DuPont Performance Polymers Zytel® 73G30HSL BK416 Nylon 6 (Unverified Data**) 30% Glass Reinforced Heat Stabilized Polyamide 6 Zytel 73G30HSL BK416 is a 30% glass fiber reinforced heat stabilized lubricated black polyamide 6 resin for injection molding.Information provided by..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	50%RH; ISO 179/1eA
DuPont Performance Polymers Zytel® 73G30L NC010 Nylon 6 (Unverified Data**) 30% Glass Reinforced Polyamide 6Zytel 73G30L NC010 is a 30% glass fiber reinforced polyamide 6 resin for injection molding.Information provided by DuPont Performance Polymers
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179
Chi Mei Polylac® PA-727 ABS Electro-plating
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	After conditioning at 23°C/50%RH; ISO 179/Af
Arkema Group Orgalloy® LE60 THM Polyamide Alloy Polyamide Alloy, Semi-Flexible gradeTubes / Mandrels / Profiles / CablesInformation provided by Arkema Group
Charpy Impact, Notched	2.30 J/cm² @Temperature -20.0 °C	10.9 ft-lb/in² @Temperature -4.00 °F	Dry; ISO 179/Af
Arkema Group Orgalloy® RS 60E10 Polyamide Alloy Polyamide Alloy, Rigid Blown film gradeTubes / Mandrels / Profiles / CablesInformation provided by Arkema Group
Charpy Impact, Notched	2.30 J/cm² @Temperature 23.0 °C	10.9 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Akro-Plastic Akromid® A3 GF 50 (2423) PA 6.6 Conditioned, 50% Glass Filled AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Charpy Impact, Notched	2.29 J/cm²	10.9 ft-lb/in²
Arkema Group Rilsan® AZM 50 NOIR T6LD Nylon 12, 50% Glass Fiber Filled (Conditioned) Designation ISO 1874-PA12,MHLR,16-090,GF50Rigid grade with glass fiber (50%) for injection molding. Available color: black. Reinforced light and heat stabilizing agent. Mold-release agent.High rigid..
Charpy Impact, Notched	2.30 J/cm² @Temperature 23.0 °C	10.9 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Akro-Plastic Akromid® B3 GF 40 (2474) PA 6 Conditioned, 40% Glass Filled AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	ISO 179
BASF Ultramid® TG7S 35% Glass Filled PA6 (Dry) Ultramid TG7S is a 34% glass reinforced, heat stabilized, impact modified PA6 injection molding grade. It was developed to meet the demanding requirements of the first North American seat cushion ..
Charpy Impact, Notched	2.30 J/cm²	10.9 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics NORYL PX1005X PPE+PS PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V0/5VA rated. UL746C F1. Excelent dielectric strength. Suitable for E/E market in indoor/outdoor applications.