Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | DIN 53453 |
Nilit FRIANYL A63 AV15 Nylon 6.6 for injection molding Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | ISO 179/1eA |
Polyplastics TOPAS® 8007 Cyclic Olefin Copolymer (COC) (Asia/Pacific Grade) Water adsorption is small and barrier properties are good, making this grade particularly suitable for package applications for products that dislike moisture. Grade 8007 has lower coefficient of el.. |
|||
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | ISO 179-1 |
Vyncolit Vyntec® CF8050 Carbon Fiber Reinforced Phenolic VYNTEC CF8030 is a carbon fiber reinforced phenolic moldable composite with excellent tribological properties. It has high mechanical strength combined with low density.Information provided by Sumit.. |
|||
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | ISO 179-1 |
Vyncolit X659 Glass, Mineral and Graphite Filled Novolac Phenolic Novolac resin based, glass fiber, mineral and graphite filled. Grade with superior stiffness, high dimensional stability and excellent tribological properties. Good chemical resistance against sever.. |
|||
Charpy Impact, Notched | 0.260 J/cm² @Temperature 23.0 °C |
1.24 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
Topas Advanced Polymers TOPAS® 8007D-61 Cyclic Olefin Copolymer (COC) TOPAS® 8007D-61 is an externally lubricated version of our 8007 series of injection molding resins, targeting injection blow molding (IBM) and injection stretch blow molding (ISBM) applications. Li.. |
|||
Charpy Impact, Notched | 0.260 J/cm² @Temperature 23.0 °C |
1.24 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
Topas Advanced Polymers TOPAS® 8007S-04 Cyclic Olefin Copolymer (COC) TOPAS® 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface ma.. |
|||
Charpy Impact, Notched | 0.260 J/cm² @Temperature 23.0 °C |
1.24 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
Topas Advanced Polymers TOPAS® 8007X10 Cyclic Olefin Copolymer (COC) TOPAS® 8007X10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moist.. |
|||
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | ISO 179 |
Unitika TERRAMAC TP-4030 Polylactic Acid (PLA) Soft, Extrusion, blow, and foam sheet grade. Bio-based materials produced from annually renewable raw materials.Information provided by Unitika Ltd. |
|||
Charpy Impact, Notched | 0.260 J/cm² @Temperature 23.0 °C |
1.24 ft-lb/in² @Temperature 73.4 °F |
EN ISO 179 |
Ensinger TECASINT™ 2022 Polyimide, Black, 15% Graphite (PI) TECASINT™ 2000 series of polyimide stock shapes provide a superior combination of high temperature and bearing and wear, properties that make it an ideal choice for the most demanding applications... |
|||
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | ISO 179 |
Chi Mei Kibiton® PB-5925 SBC Transparency, high stiffness, injection grade |
|||
Charpy Impact, Notched | 0.260 J/cm² @Temperature -30.0 °C |
1.24 ft-lb/in² @Temperature -22.0 °F |
|
Arkema Group Appryl® CZT 1030 Polypropylene, 30% Talc/Mica Filled Compound of a PP copolymer modified with EPR and 30% of a mixture of talc and mica. This grade has been specially developed for exterior automotive applications, that required an excellent thermal d.. |
|||
Charpy Impact, Notched | 0.260 J/cm² | 1.24 ft-lb/in² | ISO 179/1eA |
Polyplastics Duracon® EB-08 Acetal Co-polymer (POM), Conductive, Antistatic DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |