Polymer Property : Flexural Strength = 154 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Flexural Strength	154 MPa	22400 psi
Poco Graphite SUPERSiC® 3C Silicon Carbide SUPERSiC that has been coated with a 75 µm CVD SiC coating, which seals the surface.Uses: Ideal for high-temperature deposition and CVD applications.Information provided by PocoGraphite
Flexural Strength	154 MPa	22400 psi
Poco Graphite SUPERSiC® 3CX Silicon Carbide SUPERSiC that has been coated twice with a 75 µm CVD SiC coating, which seals the surface. Uses: Ideal for high-temperature anneal processesInformation provided by PocoGraphite
Flexural Strength	154 MPa	22300 psi	ASTM D790
Solvay Specialty Polymers Udel® GF-130 Polysulfone (PSU)  (Unverified Data**) Udel GF-130, resin is a 30% glass fiber reinforced polysulfone compound. Glass fiber substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resi..
Flexural Strength	154 MPa	22300 psi	ASTM D790
Solvay Specialty Polymers Torlon® 4645 Polyamide-imide (PAI)  (Unverified Data**) Torlon 4645, an injection-moldable, wear-resistant grade of polyamide-imide (PAI), has been formulated to give outstanding wear resistance in lubricated wear applications. Torlon PAI has the highest..
Flexural Strength	154 MPa	22300 psi
Glastic Laminates/Shapes TSF Fiberglass-Reinforced Polyester Laminate Data provided by Glastic Corporation.NEMA GPO-1. General purpose, high impact, heat resistant, dimensionally stable, cold punching. Excellent hot compression.
Flexural Strength	154 MPa <br>@Temperature 22.0 Â°C	22300 psi <br>@Temperature 71.6 Â°F	25 mm wide 100 mm long, flat samples; ISO 14125
Menzolit MenzolitÂ® SMC 0300 Unsaturated Polyester UP SMC 0300 is a low shrink standard SMC providing improved surface quality, reduced shrinkage and warpage. Typical fields of applications are mechanical engineering and electrical industry, where impr..
Flexural Strength	154 MPa	22300 psi
Lushan PA+30% GF+5% AR-1A Nylon Toughener/PA Impact Modifier Nylon toughener/PA impact modifier Lushan series is a maleic anhydride grafted polyolefin elastomer, with a very low residual maleic anhydride monomer, no irritating odor when using. Nylon toughener..
Flexural Strength	154 MPa	22300 psi	ISO 178
SABIC Innovative Plastics LNP LUBRICOMP OX90351 PPS LNP LUBRICOMP* OX90351 is a compound based on Polyphenylene Sulfide resin containing Proprietary Filler(s). Added feature of this material is: Wear Resistant.
Flexural Strength	154 MPa	22300 psi	1.3 mm/min, 50 mm span; ASTM D790
SABIC Innovative Plastics LNP LUBRICOMP RFL449 PA 66 LNP* LUBRICOMP* RFL449 is a compound based on Nylon 66 resin containing 20% Glass Fiber, 20% PTFE. Added features of this grade include: Wear Resistant, Flame Retardant.
Flexural Strength	154 MPa	22300 psi	ASTM D790
Solvay Specialty Polymers TorlonÂ® 4645 Polyamide-imide (PAI) TorlonÂ® 4645, an injection-moldable, wear-resistant grade of polyamide-imide (PAI), has been formulated to give outstanding wear resistance in lubricated wear applications.Features: Flame Retarda..
Flexural Strength	154 MPa	22300 psi	ASTM D790
Solvay Specialty Polymers UdelÂ® GF-130 Polysulfone (PSU), Glass Fiber UdelÂ® GF-130, resin is a 30% glass fiber reinforced polysulfone compound. Glass fiber substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical ..
Flexural Strength	154 MPa	22300 psi	2.6 mm/min, 100 mm span; ASTM D790
SABIC Innovative Plastics LNP STAT-KON Lexan_LCF1506 PC LNP* Stat-kon* Lexan_LC1500N compound is a 15% carbon fiber, 6% PTFE reinforced polycarbonate.
Flexural Strength	154 MPa	22300 psi	2.6 mm/min, 100 mm span; ASTM D790
SABIC Innovative Plastics LNP STAT-KON Lexan_LCF1506 PC (Europe-Africa-Middle East) LNP* Stat-kon* Lexan_LCF1506 is a 15% carbon fiber, 6% PTFE reinforced polycarbonate.
Flexural Strength	154 MPa	22300 psi	ASTM D790
SABIC Innovative Plastics NORYL HM4025H PPE+PS (Asia Pacific) 40% GF/MF filled FR PPE/PS blend, high flow
Flexural Strength	154 MPa	22300 psi	ASTM D790
SABIC Innovative Plastics NORYL PX2956 PPE+PS (Asia Pacific) PPE+PS GF+Mineral Filler total 35% FR V-0
Flexural Strength	154 MPa	22300 psi	ISO 178
SABIC Innovative Plastics LNP STAT-KON KE002 ACETAL LNP* STAT-KON* KE002 is a compound based on Acetal resin containing 10% Carbon Fiber. Added feature of this material is: Electrically Conductive.
Flexural Strength	154 MPa	22300 psi	1.3 mm/min, 50 mm span; ASTM D790
SABIC Innovative Plastics ValoxÂ® 451E PBT (Europe-Africa-Middle East) VALOX 451E is 20% glass reinforced, flame retardant PBT injection moulding resin.
Flexural Strength	154 MPa	22300 psi	ASTM D790
Ensinger Tecapeek® XP-96 Compression Molded PEEK Ensinger Special Polymers offers over twenty different VICTREX® PEEK blends to choose from and has the capability to blend custom compounds for specific applications. Compression molding results in..
Flexural Strength	154 MPa	22300 psi	ASTM D790
Ensinger Tecapeek® XP-96B Compression Molded PEEK, Unfilled, Black Pigmented Ensinger Special Polymers offers over twenty different VICTREX® PEEK blends to choose from and has the capability to blend custom compounds for specific applications. Compression molding results in..
Flexural Strength	154 MPa <br>@Temperature 23.0 °C	22300 psi <br>@Temperature 73.4 °F	ASTM D790
DuPont Performance Polymers VESPEL TP-8161 Polyimide DuPont Vespel TP-8161 parts are specified for high-temperature applications. TP-8161 parts offer a unique balance of mechanical and thermal properties for superior performance in aggressive environm..
Flexural Strength	154 MPa <br>@Temperature -40.0 °C	22300 psi <br>@Temperature -40.0 °F	ASTM Test
BASF Ultramid® 8202 HS PA6 (Conditioned) Ultramid 8202 HS is a heat stabilized, low viscosity, general purpose nylon 6 injection molding homopolymer. It possesses the combination of strength and toughness and has excellent chemical and ab..
Flexural Strength	154 MPa <br>@Temperature -40.0 °C	22300 psi <br>@Temperature -40.0 °F	ASTM Test
BASF Ultramid® 8202 PA6 (Conditioned) Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ult..
Flexural Strength	154 MPa	22300 psi	2.6 mm/min, 100 mm span; ASTM D790
SABIC Innovative Plastics LNP STAT-KON Lexan_LCF1506 PC (Asia Pacific) 15% carbon fiber, 6% PTFE reinforced polycarbonate.