Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 400 MPa | 58000 psi | |
Plastcom SLOVAMID 6 GF 60 000/1M PA6 reinforced with 60% glass fibre Features: PA 6 for injection moulding, chemically strengthened with 60% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-go.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ISO 178 |
PolyOne OnForce™ LFT AM-30LCF/001 Grey Polyphthalamide (PPA) PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. .. |
|||
Flexural Strength | 400 MPa | 58000 psi | |
PCC-Advanced Forming Technology 68% AlSiC Metal Matrix Composite AlSiC metal matrix composites are formed by pressure infiltrating molten aluminum into silicon carbide preforms. This method of casting is typically used in applications where solution requirements .. |
|||
Flexural Strength | 400 MPa | 58000 psi | ASTM D-790 |
PlastiComp Complet® LCF30 - PA66 Nylon 66, 30% Long Carbon Fiber Reinforced Complēt® long-fiber reinforced pellets are manufactured to exceed expectation for quality and performance.Nylon 66 with 30% carbon fiber reinforcementInformation provided by PlastiComp, Inc. |
|||
Flexural Strength | 400 MPa | 58000 psi | ISO 178 |
Solvay Specialty Polymers Ixef® 1022 Polyarylamide (PARA)
(Unverified Data**) Ixef 1022 is a 50% glass-fiber reinforced, general purpose polyarylamide compound which exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance. Ixef 1022.. |
|||
Flexural Strength | 400 MPa | 58000 psi | |
Lehmann & Voss LUVOCOM® 1105-8048 PEEK, with carbon fiber Applications: Automotive industry, textile machinery, medical- and precision engineering, aircraft industry.High-strength and high-stiff parts; low coefficient of expansion.Dynamic stressed parts at.. |
|||
Flexural Strength | >= 400 MPa | >= 58000 psi | |
MarkeTech Repton 006 Aluminum Oxide Brand 006 features: Ultra High Purity.REPTON setter tiles, kiln furniture, and special fixtures are lightweight, ridge, and high strength ceramics that resist distortion and spalling, even when ther.. |
|||
Flexural Strength | 400 MPa | 58000 psi | |
MTI ThermoStran® PPA-50G Long Glass Fiber Compound ThermoStran® is custom designed long fiber thermoplastic compound (LFC) engineered to meet specific end use requirements. Continuous fibers are pultruded to yield pellets with fibers equivalent t.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ASTM D790 |
Solvay Specialty Polymers Amodel® DW-1150 Polyphthalamide (PPA), 50% Glass Fiber Amodel® DW-1150 is a 50% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient o.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ISO 178 |
Solvay Specialty Polymers Amodel® FC-1150 Polyphthalamide (PPA), 50% Glass Fiber Amodel® FC-1150 is an FDA-approved, 50% glass fiber reinforced resin designed for high strength and stiffness. This combines with its excellent thermal properties, low water absorption and good h.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ISO 178 |
Solvay Specialty Polymers Ixef® 1032 Polyarylamide (PARA), 60% Glass Fiber (Dry) Ixef® 1032 is a 60% glass-fiber reinforced, general purpose polyarylamide compound which exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.Featur.. |
|||
Flexural Strength | 400 MPa | 58000 psi | |
Sapco Si.SiC Silicon Carbide Information provided by Sapco. |
|||
Flexural Strength | 400 MPa | 58000 psi | Bending Strength; 4-Point Method (40x4x3 mm³); ASTM-F417 |
CeramTec Rubalit® 708S Alumina, 96% Rubalit® 708S (96%) is an alumina that features high strength and thermal conductivity. It provides outstanding results when used on commercially available thick-film pastes and metallization syste.. |
|||
Flexural Strength | 400 MPa | 58000 psi | Bending Strength; 4-Point Method (40x4x3 mm³); ASTM-F417 |
CeramTec Rubalit® A 1999.5 Alumina, 99.7% Rubalit® A 1999.5 (99.7%) is mechanically stronger, features a higher heat conductivity, and is more corrosion resistant than other aluminas. This high-purity aluminum oxide ceramic with carbon mat.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ASTM D790 |
Chase Plastics CP Pryme® NNN260L (Dry) Nylon 66/6 Copolymer, 60% Glass Fiber Reinforced Features: Good chemical resistanceGood compressive strengthGood creep resistanceGood dimensional stabilityGood flowGrease resistantOil resistantHigh rigiditySolvent resistantHigh tensile strengthHig.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ASTM D790 |
Hexcel® HexMC® C/2000/R1A Carbon Epoxy Molding Composite HexMC® is a high performance carbon molding composite, specifically designed for compression molding. The epoxy matrix and high carbon fiber volume content enable components to be molded for a wide.. |
|||
Flexural Strength | 400 MPa | 58000 psi | ASTM-F394 |
CoorsTek ADS-96R 96% Alumina Thick Film Substrate This high-purity material ensures strong, reliable performance for ceramic substrate application. Applications: thick films and lasers |
|||
Flexural Strength | 400 MPa | 58000 psi | ASTM F417 |
CoorsTek PlasmaPure™ Alumina (nom. 99.8% Al2O3) Thermal Shock Delta Tc = 200°C - Thermal shock tests are performed by quenching samples in water from different elevated temperatures. Delta Tc is the change in temperature which results in a shar.. |
|||
Flexural Strength | 400 MPa | 58000 psi | Typical for SiC |
Destech Silicon Carbide, Solid or Foamed Destech silicon carbide foam is produced by chemical vapor reaction (CVR), in which high temperature silicon bearing gases convert glassy, or vitreous, carbon foam to SiC. Destech SiC foam has no c.. |
|||
Flexural Strength | >= 400 MPa | >= 58000 psi | Perpendicular to laminations; IEC 1212-2 5.1 |
Hippe PI GC 301 Woven Glass Cloth Reinforced Phenolic Sheet Used in electrical and mechanical applications. Very good mechanical and electrical properties at high temperature.Information provided by Hippe. |
|||
Flexural Strength | 400 MPa | 58000 psi | 2 [mm/min]; ISO 178 |
Akro-Plastic Akromid® A3 GF 60 (2424) PA 6.6 Dry, 60% Glass Filled AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat.. |
|||
Flexural Strength | 400 MPa | 58000 psi | Bending Strength; 4-point method (40x4x3 mm³); ASTM-F417 |
CeramTec CeramCool® Rubalit® 708 Alumina, 96% CeramCool® is a metallized ceramic heat-sink for high power applications demonstrated by high power LED-systems. CeramCool® material characteristics: electrical insulation, high volume resistivit.. |
|||
Flexural Strength | 400 MPa @Temperature 23.0 °C |
58000 psi @Temperature 73.4 °F |
|
Ceradyne CeraTrex™ 146-S5 Silicon Carbide Features:corrosion resistancewear resistancehardnessnet shape fabricationApplications:wear componentsInformation provided by Ceradyne Company |