Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Compressive Strength | 62.05 - 89.63 MPa | 9000 - 13000 psi | after 816°C |
Pyrotek Pyrocast ZE Refractory Shapes Aggregate Base: MulliteApplicationsDoor lintel Breech plug Crucible bottoms Furnace rake Information provided by Pyrotek. |
|||
Compressive Strength | 79.3 - 89.6 MPa | 11500 - 13000 psi | at 1% Deformation; ASTM D695 |
Ensinger TECAST™ Cast Nylon (PA) TECAST™ Cast Nylon reduces downtime in heavy equipment applications. It is a low cost alternative for many non-ferrous machined parts. It has self-lubricating qualities which provide for excellen.. |
|||
Compressive Strength | 79.3 - 89.6 MPa @Temperature 22.8 °C |
11500 - 13000 psi @Temperature 73.0 °F |
at 1% Deformation |
Ensinger TECAST VEKTON™ 6PB Nylon 6 (PA6) TECAST VEKTON™ 6PB cushion pads are used to dampen the shock load on the anvil of a pile hammer. Specially formulated from an impact-modified type 6 nylon, they combine the excellent strength of n.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron BronzeWeld-PH™ Bronze-Filled, Structural Adhesive Putty; High Temperature Paste BronzeWeld-PH™ is BronzeWeld-P™ for up to 320° F (160° C) under stress. Used when it must resist up to 320° F in operation. Superior resistance to strong solvents and other chemicals. Technical.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Ferrobond-LH™ Steel-Filled, Structural Adhesive Putty; High Temperature Liquid Ferrobond-LH™ is Ferrobond-L™ for up to 320° F (160° C) under stress; Superior resistance to strong solvents and other chemicals. Technical Characteristics: A: 23 lbs/gal; B: 9.8 lbs/gal; mixin.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Ferrobond-L™ Steel-Filled, Structural Adhesive Putty; Liquid Ferrobond-L™ is a fluid pourable Ferrobond-P™. Casting version of Ferrobond-P™. Choose when flowing consistency is needed for pouring. Excellent for tooling. Technical Characteristics: A: 23 lbs.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Ferrobond-PH™ Steel-Filled, Structural Adhesive Putty; High Temperature Paste Ferrobond-PH™ is Ferrobond-P™ for up to 320° F (160° C) under stress. Superior resistance to strong solvents and other chemicals. For resistance up to 160° C in operation. Technical Characteris.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Metalfix-PH™ Aluminum-Filled, Structural Adhesive Putty; High Temperature Paste Metalfix-PH™ is MetalFix-P™ for up to 320° F (160° C) under stress. Used when it must resist up to 320° F in operation. Superior resistance to strong solvents and other chemicals. Technical Cha.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Metalfix-P™ Aluminum-Filled, Structural Adhesive Putty; Paste Metalfix-P™ is an aluminum-filled, structural adhesive putty. Patch, bond, resurface metal, structural components, patterns, molds, pipes, tanks, sculptures, and appliances. Forms a permanent bond .. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron SS-Bond-P™ Stainless-Steel-Filled, Structural Adhesive Putty; Paste SS-Bond-P™ is a stainless-steel-filled structural adhesive putty. Used where a filler is needed that is as heavy, hard, and wear resistant as iron, but rustproof and more chemical resistant. Common.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron BronzeWeld-P™ Bronze-Filled, Structural Adhesive Putty; Paste BronzeWeld-P™ is a bronze-filled structural adhesive putty. Ideal for statuary, antiques, boats, transportation equipment, vases, railings, metal furniture, metal trim, frames, and instruments. Use.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Ferrobond-P™ Steel-Filled, Structural Adhesive Putty; Paste Ferrobond-P™ is a steel-filled, structural adhesive putty. Repair or fill metal components, castings, tanks, and magnetic fixtures. Preferred to Metalfix-P™ where heavier weight, magnetism, or hig.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Metalfix-LH™ Aluminum-Filled, Structural Adhesive Putty; High Temperature Liquid Metalfix-LH™ is MetalFix-L™ for up to 320° F (160° C) under stress. Superior resistance to strong solvents and other chemicals. Technical Characteristics: A: 14.8 lbs/gal; B: 9.8 lbs/gal; mixin.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron SS-Bond-PH™ Stainless-Steel-Filled, Structural Adhesive Putty; High Temperature Paste SS-Bond-PH™ is SS-Bond-P™ for up to 320° F (160° C) under stress. Superior resistance to strong solvents and other chemicals. Technical Characteristics: A: 26 lbs/gal; B: 9.8 lbs/gal; mixing ra.. |
|||
Compressive Strength | 62.1 - 89.6 MPa | 9000 - 13000 psi | |
Abatron Metalfix-L™ Aluminum-Filled, Structural Adhesive Putty; Liquid Metalfix-L™ is a fluid-pourable version of MetalFix-P™. For patterns, molds, prototypes, casting, and all applications where a castable, fluid, MetalFix-P™ is needed. Excellent for tooling. Techn.. |