Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength | 10.0 MPa | 1450 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® ESD 5510 Static Dissipative Thermoplastic Compound PRE-ELEC® ESD 5510 is a static dissipative thermoplastic compound based on polypropylene. The dissipative property is permanent and built into the polymer chain. PRE-ELEC® ESD 5510 can be injectio.. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | DIN 53504 |
NEXA® PFX8028 Perfluoroelastomer NEXA produces sealing elements for extreme and critical applications, particularly where high temperature, wet conditions (steam/water), purity and chemical resistance are important factors to consi.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | at Yield; ISO 527-1/-2 |
Quadrant EPP Semitron® ESd 500HR PTFE, static dissipative, extruded (ISO Data) Reinforced with a proprietary synthetic mica, Semitron ESd 500HR offers an excellent combination of low frictional properties, good dimensional stability and electrostatic dissipation. Whenever virg.. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | After 168 H in Air Oven at 80°C; NBR NM-IEC 60811-1-2 |
Karina Karintox 70 Polyolefin Compound Halogen free, fire retardant, low smoke and fume polyolefinic compound. Recommended for insulation of electrical cables up to 1KV.Information provided by Karina Indústria e Comércio de Plá.. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | After 168 H in Air Oven at 80°C; NBR NM-IEC 60811-1-2 |
Karina Karintox 70/2 Polyolefin Compound Halogen free, fire retardant, low smoke and fume polyolefinic compound. Recommended for insulation of electrical cables up to 1KV.Information provided by Karina Indústria e Comércio de Plá.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | ISO 37 |
Kraton® D1163 J (SIS) Linear Block Copolymer Description: Kraton D1163 J Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified in t.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | Measured on injection molded slabs; ASTM D412 |
Kraton® D4153 E (O/E SBS) Linear Block Copolymer Description: Kraton D4153 E is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It contains 40 phr paraffinic oil which is cl.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Momentive Performance Materials Addisilâ„¢ 1150 M Industrial Molding Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Momentive Performance Materials Siloprenâ„¢ Electro 641 Electrically Insulating Liquid Silicone Rubber This LSR elastomer is an electrically insulating, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevate.. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | After 168 H in Air Oven at 100°C; NBR NM-IEC 60811-1-2 |
Karina 70911-35/1-HY-AC Ivory PVC Compound Information provided by Karina Indústria e Comércio de Plásticos Ltda. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Momentive Performance Materials Siloprenâ„¢ LSR 2050 Liquid Silicon Rubber - General Purpose This LSR elastomer is a general purpose, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated tempera.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Momentive Performance Materials Siloprenâ„¢ LSR 2060 Liquid Silicone Rubber - General Purpose This LSR elastomer is a general purpose, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated tempera.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Momentive Performance Materials Siloprenâ„¢ LSR 2651 Liquid Silicone Rubber - Non Post Cure / Low Compression Set This LSR elastomer is a specialty grade, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated tempera.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Momentive Performance Materials Siloprenâ„¢ LSR 2715/50 Liquid Silicone Rubber - Self-Bonding / Self-Lubricating This LSR elastomer is a self-bonding, self-lubricating, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at e.. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | ASTM D 638 |
Karina 806-48/1-H-ISE-LMP Black PVC Compound Heavy metal free PVC compound.Information provided by Karina Indústria e Comércio de Plásticos Ltda. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | After 168 H in Air Oven at 100°C; NBR NM-IEC 60811-1-2 |
Karina 806-48/1-H-ISE-LMP Black PVC Compound Heavy metal free PVC compound.Information provided by Karina Indústria e Comércio de Plásticos Ltda. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | ASTM D 638 |
Karina 807-10/236-H-Ise White PVC Compound Information provided by Karina Indústria e Comércio de Plásticos Ltda. |
|||
Tensile Strength | >= 10.0 MPa | >= 1450 psi | ISO 527 |
Lucobit Lucopren® 1500M Soft Polyolefin Granules Lucopren is a novel, super-soft and highly elastic raw material based on polyolefins. Lucopren displays excellent flexibility and elasticity. It can be converted into products with an excellent touc.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | |
Master Bond EP30DPMed USP Class VI, Two Component Epoxy Urethane System Master Bond Polymer System EP30DPMED is a versatile, two component, epoxy-urethane elastomeric compound, featuring superior strength, toughness, and abrasion resistance for high performance bonding,.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | ASTM D638 |
Goodfellow TPX® DX310 Coating/Extrusion Grade Polymethylpentene This grade is highly recommended for paper coating or for fiber extrusion.TPX® is semi-crystalline, transparent, very light and - for a polyolefin - expensive. It has good release characteristics a.. |
|||
Tensile Strength | 10.0 MPa @Strain 100 % |
1450 psi @Strain 100 % |
ISO 37 |
BASF Elastollan 695 AU TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and wear resistance, good damping characteristics and a high resilience performance.Typical Applicat.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | Silicone Property; ASTM D412 |
Arlon R35640T003 0.003" (0.0762 mm) Uncured Silicone Rubber with Polyethylene Naphthalate Substrate Design/Construction:Liner: Polyester Side 1: Uncured Silicone RubberSubstrate: Polyethylene NaphthalateAppearance: Gray gum on glass fiber fabricThis data represents typical values for the productio.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | 300; ISO 37 |
BASF Elastollan 2180 A TPUR Description: Thermoplastic Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, high tear and tensile strength, good damping characteristics and a high resilien.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | 100; ISO 37 |
BASF Elastollan 890 AN TPUR Description: Thermoplastic Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, high tear and tensile strength, good damping characteristics and a high resilien.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | ASTM D412 |
Arlon RBLW401X##-P1 0.040" (1.02 mm) Cured Self-Fusing Silicone Rubber Description: 1 inch wide, 40 mil thick, Red, Triangular cross-section, Self-Fusing Silicone Tape. Product is supplied in various roll lengths. ## in the product number indicates roll length in yards.. |
|||
Tensile Strength | 10.0 MPa | 1450 psi | ISO 37 |
AlphaGary Evoprene™ G 991 SEBS Thermoplastic Elastomer Evoprene™ G compounds are styrene – ethylene butylene –styrene base thermoplastic elastomer with related hydrogenated block copolymers. These polymers are fully saturated so the resistance to oxi.. |