Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength | 69.6 MPa | 10100 psi | ASTM D638 |
Ravago Manufacturing Americas Hylex® P1010L Polycarbonate, Unreinforced, Intermediate Flow Information provided by Ravago. |
|||
Tensile Strength | 69.6 MPa | 10100 psi | ASTM D638 |
Ravago Manufacturing Americas Hylex® P1017L Polycarbonate, Unreinforced, High Flow, Mold Release Information provided by Ravago. |
|||
Tensile Strength | 69.6 MPa | 10100 psi | ASTM D638 |
Ravago Manufacturing Americas Hylex® P1310L Polycarbonate, UV Stabilized, Intermediate Flow, Mold Release Information provided by Entec. |
|||
Tensile Strength | 69.6 MPa | 10100 psi | ASTM D638 |
Ravago Manufacturing Americas Hylex® P1317L Polycarbonate, UV Stabilized, Higher Flow, Mold Release Information provided by Ravago. |
|||
Tensile Strength | 69.6 MPa @Thickness 3.18 mm |
10100 psi @Thickness 0.125 in |
ASTM D638 |
Solvay Specialty Polymers Radel® R-5000 Polyphenylsulfone (PPSU) Radel® R-5000 is a transparent polyphenylsulfone (PPSU) which offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins... |
|||
Tensile Strength | 69.6 MPa @Thickness 3.18 mm |
10100 psi @Thickness 0.125 in |
ASTM D638 |
Solvay Specialty Polymers Radel® R-5500 Polyphenylsulfone (PPSU) Radel® R-5500 is a general purpose extrusion grade of polyphenylsulfone (PPSU), offering exceptional hydrolytic stability and better toughness than most commercially available high-temperature po.. |
|||
Tensile Strength | 69.6 MPa @Thickness 3.18 mm |
10100 psi @Thickness 0.125 in |
ASTM D638 |
Solvay Specialty Polymers Radel® R-5800 Polyphenylsulfone (PPSU) Radel® R-5800 is a high melt flow grade of Radel® polyphenylsulfone (PPSU). It is especially well-suited for parts requiring long flow length with thin walls. Radel® resins offer exceptiona.. |
|||
Tensile Strength | 69.6 MPa | 10100 psi | ASTM D638 |
Techmer ES Luriblend® PA6 TSX15 Nylon 6 Availability: North AmericaForms: PelletsAdditive: PTFE+ Silicone Lubricant(15%)Features: Lubricated and Good Wear ResistanceInformation provided by TP Composites, Inc. |
|||
Tensile Strength | 69.6 - 70.3 MPa | 10100 - 10200 psi | ASTM D638 |
Cast Nylons Nycast® SLX Premium Bearing Grade Nylon Nycast® SLX closes the gap between static and dynamic coefficients of friction. Used in wear pads, bearing blocks, and other load-bearing slide applications.Data provided by the manufacturer, Cast.. |