- HOME
- POLYMER SEARCH
- Polymer Property : Storage Temperature = 5.00 °C
Polymer Property : Storage Temperature = 5.00 °C Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond CSA-NF Cyanoacrylate Surface Activator Permabond C Surface Activator (CSA-NF) is used in conjunction with Permabond cyanoacrylate adhesives to promote a faster cure and to extend their gap-filling capabilities. It significantly reduces t.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond ET505 Epoxy Resin PERMABOND ET505 is a two-part, 1:1 mixable epoxy adhesive. ET505 is a semi-flexible toughened epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plas.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond ET515 Epoxy Resin PERMABOND® ET515 is a 1:1 mixable epoxy adhesive. ET515 is a semi-flexible toughened adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and compo.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond ET536 Epoxy Resin PERMABOND ET536 is a two-part, 1:1 mixable epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. Permabond ET536 forms tough bo.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HH120 Anaerobic Threadlocker Permabond® HH120 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking bolts, nuts and screws that require permanent assembly. Its high viscosity allows for .. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HH131 High Temperature Threadlocker Permabond® HH131 is a very high temperature resistant, high strength anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. It is used for .. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HL126 Anaerobic Threadlocker PERMABOND® HL126 Threadlocker is a water thin product for locking pre-assembled parts through wicking action. PERMABOND® HL126 Threadlocker prevents vibration loosening. Because of the low viscosi.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HL138 Anaerobic Retaining Compound Permabond® HL138 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure which .. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HM128 Anaerobic Threadlocker Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HM129 Anaerobic Threadlocker Permabond® HM129 is a high strength medium viscosity anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. Cure is fast and reliable on st.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond HM161 Anaerobic Retaining Compound Permabond® HM161 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space’ between parts and upon cure unitiz.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond LH054 Anaerobic Threadsealant Permabond® LH054 is an anaerobic curing, calibrated strength pipe sealant that allows for easier disassembly – especially of larger diameter pipes. It cures anaerobically when in contact with meta.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond POP Polyolefin Primer Permabond® Polyolefin Primer has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond® Cyanoacrylate adhesives. Due to their low surface energy, .. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond TA435 Toughened Acrylic Adhesive & Initiator PERMABOND TA435 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This adhesive may be used in a variety of structural bonding appli.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond TA439 Toughened Acrylic Adhesive Permabond® TA439 is a two component structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some plastics. The typical fixture time of is 10-30 seconds. The fast f.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond TA440 Toughened Acrylic Adhesive PERMABOND TA440 is a two component structural acrylic adhesive suitable for bonding metals, glass, wood, ferrites, ceramics and some rigid plastics. This adhesive may be used in a variety of structu.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond UV620 UV-curable Adhesive PERMABOND UV620 is a single part, fast curing, UV curable adhesive. Its excellent optical clarity and resistance to yellowing make it ideal for bonding glass and crystal for a high quality finish. I.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond UV625 UV-curable Adhesive PERMABOND UV625 is a single part, fast curing, UV curable adhesive primarily designed for bonding and sealing glass and metal. The cured adhesive is tough, flexible and has excellent impact resistan.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond UV640 UV-curable Adhesive PERMABOND UV640 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbon.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond UV670 UV-curable Adhesive PERMABOND UV670 is a single part, fast curing, UV curable adhesive. The cured adhesive is tough, flexible and has excellent impact resistance. Permabond UV670 is well suited for bonding glass to met.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond UV7141 UV-curable Adhesive Permabond UV7141 is a UV-curable adhesive with a secondary anaerobic cure mechanism. This makes it ideal for bonding materials such as ceramic-coated glass, mirrors, etc. where UV-light cannot penet.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond UV630 UV-curable Adhesive PERMABOND UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbon.. |
|||
| Storage Temperature | 5.00 - 30.0 °C | 41.0 - 86.0 °F | |
| Silikony Polskie Polsil E5S Silicone Emulsion POLSIL® E – water emulsions of POLSIL® OM methylsilicone fluid. These are milky-white liquids easily mixed with water, smooth to touch, with a specific smell. They are chemically inert. .. |
|||
| Storage Temperature | 5.00 - 30.0 °C | 41.0 - 86.0 °F | |
| Silikony Polskie Polsil E2 Silicone Emulsion POLSIL® E – water emulsions of POLSIL® OM methylsilicone fluid. These are milky-white liquids easily mixed with water, smooth to touch, with a specific smell. They are chemically inert. .. |
|||
| Storage Temperature | 5.00 - 30.0 °C | 41.0 - 86.0 °F | |
| Silikony Polskie Polsil E5 Silicone Emulsion POLSIL® E – water emulsions of POLSIL® OM methylsilicone fluid. These are milky-white liquids easily mixed with water, smooth to touch, with a specific smell. They are chemically inert. .. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond A011 Anaerobic Threadlocker Permabond® A011 is an anaerobic adhesive designed for locking and sealing threaded or coaxially fitting metal parts where subsequent dismantling is required. Its controlled strength ensures fatigue.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond ET514 Epoxy Resin PERMABOND ET514 is a 1:1 mixable epoxy adhesive. It has excellent resistance to impact and vibration and is ideal for structural bonding of metal, wood, composites and certain plastics. Its rapid cu.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond A130 Anaerobic Threadlocker Designed for the locking and sealing of metal parts, Permabond® A130 is ideally suited for use on components that need to be dismantled for maintenance. Giving vibration resistance it can be used t.. |
|||
| Storage Temperature | 5.00 - 25.0 °C | 41.0 - 77.0 °F | |
| Permabond A134 Anaerobic Retainer Permabond® A134 is a high-strength anaerobic product designed for the permanent locking and sealing of metal parts. Its 'non-drip' formulation makes it suitable for use on larger fittings, coarse t.. |
|||
| Storage Temperature | 5.00 - 27.0 °C | 41.0 - 80.6 °F | 3 months |
| ACC QSil 60 QSI Quantum Silicones 50 Durometer Condensation Cure for Potting QSil 60 is a red, high temperature, self-leveling, two-component, silicone material primarily used for potting applications. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section .. |
|||
Copyright © lookpolymers.com All Rights Reserved