Physical Properties | Metric | English | Comments |
---|---|---|---|
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
9.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
High Load; ASTM D1238 |
Chevron Phillips HiD® 9308 HDPE Natural Pipe Resin
(discontinued **) Resin Type: Linear Copolymer; PE3408 Pipe Resin; ASTM D 3350 Classification: 345460A; ASTM D 4976 Classification: PE 235, A 56607Applications:Base Resin for use in Oil Patch and Industrial Pipe Appl.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
9.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
Chevron Phillips HiD® 9646T HDPE High Molecular Weight Sheeting Resin
(discontinued **) Resin Type: Linear Copolymer; ASTM D 4976 Classification: PE 235, A 56606Applications:Sheeting, Thermoforming, Profile ExtrusionData provided by Chevron Chemical. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg |
9.0 g/10 min @Load 47.6 lb |
ASTM D 1238 |
Total Finathene® 2344 HDPE film
(discontinued **) Applications: Trash can liners, merchandise bags, deli wrapInformation provided provided by Total Petrochemicals.Total Petrochemicals includes former Fina and Atofina plastics product lines. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg |
9.0 g/10 min @Load 47.6 lb |
ASTM D 1238 |
Total Finathene® 3344N Natural HDPE pipe grade
(discontinued **) Applications: industrial and mining gas distribution, potable water, sewer and sewer relining, gas and oil gathering, fiber optic innerduct, general pipe reliningInformation provided provided by To.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
9.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
Braskem ES 300 HDPE Blown Film Extrusion Polyethylene
(discontinued **) 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags; high-strength films. Informa.. |
|||
High Load Melt Index | 9.0 g/10 min | 9.0 g/10 min | ASTM D1238 |
Ineos K50-10-136 HDPE Ineos K50-10-136 is a high molecular weight, high density polyethylene copolymer. This product was developed for blowmolding automotive fuel tanks and other large parts, where the finished produc.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg |
9.0 g/10 min @Load 47.6 lb |
ISO 1133 |
Total 1285 HDPE film Applications: T-shirt sacks, trash can liners, merchandise bags, coex applicationsInformation provided provided by Total Petrochemicals.Total Petrochemicals acquired former Fina and Atofina plastics.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg |
9.0 g/10 min @Load 47.6 lb |
ASTM D 1238 |
Total 50100.2 HDPE blow molding, sheet, thermoforming resin Applications: Agricultural chemical tanks, portable fuel containers, industrial parts, pallets, large foam parts, food packaging, sheet extrusion, thermoforming, truck bed liners, dunnage containers.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
9.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
High Load; ASTM D1238 |
Chevron Phillips Marlex® 9346 HDPE Natural Pipe Resin Resin Type: Linear Copolymer; PE3408 Pipe Resin; ASTM D 3350 Classification:345464C when used with an approved color concentrate; ASTM D 4976 Classification: PE 235, A 56607Applications:Pressure Pip.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg |
9.0 g/10 min @Load 47.6 lb |
ASTM D1238 |
Equate EMDA-6147 HDPE Blow Molding Resin EMDA-6147 is a high density polyethylene copolymer resin designed for blow molding of large size containers. Its high molecular weight and broad molecular weight distribution with a balanced density.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
9.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D 1238 |
Total Finathene® 4344 HDPE, blow molding
(discontinued **) Applications: storage tank liners, intermediate bulk containers, general large-part blow molding. Blow Molding Stock Temperature 370 – 410 ºFInformation provided provided by Total Petrochemicals.T.. |
|||
High Load Melt Index | 9.0 g/10 min @Load 21.6 kg |
9.0 g/10 min @Load 47.6 lb |
ASTM D 1238 |
Total Finathene® 50100.3 HDPE blow molding
(discontinued **) Applications: Agricultural chemical tanks, portable fuel containers, industrial parts, pallets, large foam parts, food packaging. Blow Molding Stock Temperature 370 – 450 ºF Extrusion melt tempera.. |