Physical Properties | Metric | English | Comments |
---|---|---|---|
Brookfield Viscosity | 150 - 300 cP | 150 - 300 cP | 70% solids dispersed using a Brookfield #3 spindle at 100 rpm |
Old Hickory M&M Clays, Inc. Wilco-LPC Kaolin Clay Wilco LPC is the same selection as the SLU grade except it is in natural shredded or Airfloat (powdered) form. It offers the same benefits in a ceramic casting formulation discussed above for the SL.. |
|||
Brookfield Viscosity | 90 - 300 cP | 90 - 300 cP | #2/20 rpm |
Mallard Creek Polymers ROVENE® 6105 SBR Latex ROVENE® 6105 is a very soft carboxylated styrene - butadiene (SBR) latex emulsion. Its relative low molecular weight and styrene content (45%) permits the formulation of pressure sensitive adhesi.. |
|||
Brookfield Viscosity | 50 - 300 cP | 50 - 300 cP | Spindle # 3, rpm 60 |
Michelman® DigiGuard® Gloss 100 Water based overprint varnish Description: Water based overprint varnishUsage: DigiGuard® Gloss 100 is a heat resistant, glossy overprint varnishFood Contact Information when manufactured in the USA:FDA: 175.105: Components o.. |
|||
Brookfield Viscosity | 150 - 300 cP | 150 - 300 cP | Spindle # 2, rpm 60 |
Michelman® DigiPrime® 5000 Primer Description: Primer for digital printingUsage: DigiPrime® 5000 is a print primer which provides excellent adhesion of HP Indigo ElectroInks® to treated films and paper. It adheres well to many.. |
|||
Brookfield Viscosity | 150 - 300 cP | 150 - 300 cP | Spindle # 2, rpm 60 |
Michelman® DigiPrime® 5100 Primer Description: Primer for digital printingUsage: DigiPrime® 5100 is a print primer which provides excellent adhesion of HP Indigo electro inks to treated films and paper. It adheres well to many sy.. |
|||
Brookfield Viscosity | 150 - 300 cP | 150 - 300 cP | Spindle # 3, rpm 60 |
Michelman® DigiPrime® 6029 Primer Description: Primer for digital printingUsage: DigiPrime® 6029 is a flexo and gravure ready coating used to optimize substrates for HP Indigo printing. This product provides excellent adhesion of.. |
|||
Brookfield Viscosity | 100 - 300 cP | 100 - 300 cP | Spindle # 2, rpm 60 |
Michelman® GlossCoat™ 100 BL Preprint varnish Description: Water based, nonskid preprint varnish for porous substratesUsage: GlossCoat™ 100BL is a fully formulated, flexo appliable nonskid coating designed for kraft, mottled and bleached s.. |
|||
Brookfield Viscosity | 130 - 300 cP @Temperature 25.0 °C |
130 - 300 cP @Temperature 77.0 °F |
ASTM D2196-86; LVT, spindle #2 @ 30rpm |
Lord Adhesives Aeroglaze® Z3480 High Solids Aromatic Polyurethane Coating Aeroglaze® Z3480 coating is designed for use on properly prepared and primed metal surfaces, in regions requiring a VOC below 335.8 g/l (2.8 lbs/gallon).All information provided by Lord. |
|||
Brookfield Viscosity | 75 - 300 cP @Temperature 25.0 °C |
75 - 300 cP @Temperature 77.0 °F |
LVT, Spindle #1 @ 60rpm |
Lord Adhesives HPC-3C Fluoroelastomer Coating LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and flu.. |
|||
Brookfield Viscosity | 50 - 300 cP @Temperature 25.0 °C |
50 - 300 cP @Temperature 77.0 °F |
LVT, Spindle #2 @ 30rpm |
Lord Adhesives HPC-6B Ethylene Acrylic Elastomer Coating LORD HPC-6B and HPC-6C are one-part, room temperature curing ethylene acrylic elastomer (AEM) coatings which feature robust adhesion and exceptional mechanical properties. These coatings enhance ozo.. |
|||
Brookfield Viscosity | 100 - 300 cP | 100 - 300 cP | Spindle # 3, rpm 60 |
Michelman® Nomar® 70AFN Non-abrasive paper coating Description: Non-abrasive paper coatingUsage: Nomar® 70AFN is a water based, gluable, non-abrasive coating generally used to provide abrasion protection for gas flushed food packaging or small ap.. |
|||
Brookfield Viscosity | 50 - 300 cP | 50 - 300 cP | Spindle # 3, rpm 60 |
Michelman® ThermaGloss® 420 Water based over print varnish Description: Water based over print varnish.Usage: ThermaGloss® 420 is a high heat resistant overprint which imparts excellent gloss to preprinted liner board while eliminating picking and smeari.. |
|||
Brookfield Viscosity | 75 - 300 cP @Temperature 25.0 °C |
75 - 300 cP @Temperature 77.0 °F |
LVT, Spindle #1 @ 60rpm |
Lord Adhesives HPC-3B Fluoroelastomer Coating LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and flu.. |
|||
Brookfield Viscosity | 50 - 300 cP @Temperature 25.0 °C |
50 - 300 cP @Temperature 77.0 °F |
LVT, Spindle #2 @ 30rpm |
Lord Adhesives HPC-6C Ethylene Acrylic Elastomer Coating LORD HPC-6B and HPC-6C are one-part, room temperature curing ethylene acrylic elastomer (AEM) coatings which feature robust adhesion and exceptional mechanical properties. These coatings enhance ozo.. |
|||
Brookfield Viscosity | 100 - 300 cP | 100 - 300 cP | #2 @ 50 rpm |
Dow Latex XZ 92219.00 Experimental Latex Description: XZ 92219.00 Experimental latex is an aqueous dispersion of a modified carboxylated styrene butadiene copolymer. It has been developed for use as a woven backing latex where a medium sti.. |
|||
Brookfield Viscosity | 150 - 300 cP | 150 - 300 cP | #2 @ 50 rpm |
Dow Latex XZ 92226.00 Experimental Latex Description: XZ 92226.00 Experimental latex is an aqueous dispersion of a modified carboxylated styrene butadiene copolymer. It has been developed for use as latex for precoating and adhesive for se.. |
|||
Brookfield Viscosity | 100 - 300 cP | 100 - 300 cP | #2 @ 50 rpm |
Dow Latex XZ 92229.03 Experimental Latex Description: XZ 92229.03 is an aqueous dispersion of a modified carboxylated styrene butadiene copolymer. It has been developed for use as adhesive latex for secondary backed tufted carpets. It is a.. |