Physical Properties | Metric | English | Comments |
---|---|---|---|
Thickness | 1520 microns | 60.0 mil | |
Parker Chomerics C-Wing™ Heat Spreader Chomerics family of thin heat spreaders provides a low-cost, effective means of cooling IC devices in restricted spaces where conventional heat sinks are not appropriate. C-Wing spreaders are a cera.. |
|||
Thickness | 1520 microns | 59.8 mil | |
GrafTech GRAFOIL® GHC Standard Internal Combustion Laminate GRAFOIL® Grade GHC is a laminate made from Grade GTC flexible graphite. Laminate Construction: GRAFOIL® Grade GTC ? Micro-thin, phenolic-based adhesive ? GRAFOIL® Grade GTC |
|||
Thickness | 1520 microns | 59.8 mil | Standard; Laminate |
GrafTech GRAFOIL® GHL Standard Fluid Sealing Grade GHL Laminate GRAFOIL® Grade GHL is a laminate made with GRAFOIL® Grade GTB flexible graphite. Laminate thicknesses > 0.060" will be adhesively bonded to final thickness. Laminate thicknesses |
|||
Thickness | 1520 microns | 59.8 mil | Standard; Laminate |
GrafTech GRAFOIL® GHN Standard Fluid Sealing Laminate, Non-Metal Reinforced GRAFOIL® Grade GHN is an unbranded laminate made with GRAFOIL® Grade TG-337 flexible graphite, thermally bonded to both faces of a plastic insert. It is not certified to any industry standards.. |
|||
Thickness | 1520 microns | 59.8 mil | Standard |
GrafTech GRAFOIL® GTB Standard Fluid Sealing Graphite Single Layer Gasketing Material GRAFOIL® GTB flexible graphite sheet is a gasketing material containing no binders or fillers. Standard industrial grade GTB flexible graphite has an oxidation/corrosion inhibitor and is typicall.. |
|||
Thickness | 1520 microns | 60.0 mil | Gauge, nominal |
Mid-Mountain Materials ARMATEX® SF45 Silicone Rubber Coated Glass Fabric Description: Armatex Coatings are applied to base textiles that range in chemical composition, confiation and weight. Mid-Mountain specializes in engineered coatings, both polymer and mineral based... |
|||
Thickness | 1520 microns | 59.8 mil | Standard for Single-Sided Laminate |
GrafTech GRAFOIL® GRAFKOTE® Laminates, Non-Metal Reinforced GRAFOIL® GRAFKOTE® laminates are made with GRAFOIL® Grade GTB flexible graphite thermally bonded to a 0.0005" thick polymer facing on one ("Single-Sided") or both ("Double-Sided") sides. Th.. |
|||
Thickness | 1520 microns | 60.0 mil | |
Daikin NEOFLON AF-1500 PFA Film NEOFLON PFA film is a high performance film made from tetrafluoroethylene and perfluoroalkyl vinyl ether (PFA).Information provided by Daikin Industries. |
|||
Thickness | 1520 microns | 60.0 mil | |
Daikin NEOFLON NF-1500 FEP Film NEOFLON FEP films are a high performance film made from NEOFLON FEP resin and have superior reliability and retention of their properties. NEOFLON FEP is applicable in such diversified fields as el.. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon 30400N060 0.060" (1.52 mm) Uncured Silicone Rubber Design/Construction: Interleave 1: KodacelProduct: Uncured Silicone Rubber Interleave 2: Polyethylene Appearance: Translucent silicone rubber on polymer linerThis data represents typical values for .. |
|||
Thickness | 1520 microns | 60.0 mil | Rubber |
Arlon 30400R060 0.06" Uncured, Unsupported Silicone Rubber on Release Carrier Design/Construction:Side 1: Uncured, Unsupported Silicone RubberSubstrate: Kodacel CarrierInterleave: 0.003" PolyethyleneThis data represents typical values for the production material and should.. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon 32400R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier Design/Construction:Side 1: Uncured Silicone RubberCarrier: PETInterleave: PolyethyleneAppearance: Red silicone rubber on polymer linerThis data represents typical values for the production material.. |
|||
Thickness | 1520 microns | 60.0 mil | Side 1; Arlon SQA-TMS-003 |
Arlon 32400R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier Design/Construction:Side 1: Uncured Silicone RubberCarrier: PETInterleave: PolyethyleneAppearance: Red silicone rubber on polymer linerThis data represents typical values for the production material.. |
|||
Thickness | 1520 microns | 60.0 mil | Silicone; Arlon SQA-TMS-003 |
Arlon 32980X060 0.060" Uncured Silicone Rubber on Polyester Film Design/Construction:Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: Polyester FilmThis data represents typical values for the production material and should not be used as material.. |
|||
Thickness | 1520 microns | 60.0 mil | Overall Thickness; Arlon SQA-TMS-003 |
Arlon 55576R060 0.060" Cured/Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSubstrate: Style 162 FiberglassSide 2: Uncured Silicone RubberInterleave: 3 mil PEThis data represents typical values for the production material .. |
|||
Thickness | 1520 microns | 60.0 mil | ASTM D4325 |
3M Scotch® 31 Heavy Duty Mining Tape Scotch® Heavy Duty Mining Tape 31 has a tough, abrasion-resistant backing for jacket repair on mining cables. Due to extremely abrasive environment, the original jacket on the cable gets damaged of.. |
|||
Thickness | 1520 microns | 60.0 mil | Rubber; Arlon SQA-TMS-003 |
Arlon 30860R060 0.60" Uncured Silicone Rubber on a Kodacel Carrier Design/Construction:Interleave: 0.003" Low Density PolyethyleneAdd-on: Uncured Silicone RubberSubstrate: Kodacel CarrierThis data represents typical values for the production material and should .. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon 32270R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer release linerThis data represents typical values for the production ma.. |
|||
Thickness | 1520 microns | 60.0 mil | Side 1; Arlon SQA-TMS-003 |
Arlon 32270R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer release linerThis data represents typical values for the production ma.. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon 32580R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. .. |
|||
Thickness | 1520 microns | 60.0 mil | Side 1; Arlon SQA-TMS-003 |
Arlon 32580R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. .. |
|||
Thickness | 1520 microns | 60.0 mil | overall; Arlon SQA-TMS-003 |
Arlon 55143R060 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Side 2: cured silicone rubber; Substrate: 162 fiberglass; Side 1: cured silicone rubber |
|||
Thickness | 1520 microns | 60.0 mil | Overall |
Arlon 55191R060 0.060" (1.52 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place .. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon 55273R060 0.060" (1.52 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSide 2: Cured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, .. |
|||
Thickness | 1520 microns | 60.0 mil | Side 1; Arlon SQA-TMS-003 |
Arlon R37500G060 0.060" (1.52 mm) Uncured Fluorosilicone with Release PET Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Fluorosilicone Carrier: Release PETThis data represents typical values for the production material. The data should not be used to write,.. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon R37500G060 0.060" (1.52 mm) Uncured Fluorosilicone with Release PET Carrier Design/Construction: Interleave: PolyethyleneSide 1: Uncured Fluorosilicone Carrier: Release PETThis data represents typical values for the production material. The data should not be used to write,.. |
|||
Thickness | 1520 microns | 60.0 mil | Silicone; Arlon SQA-TMS-003 |
Arlon 32140R060 0.060" Uncured Silicone Rubber on Release PET Design/Construction:Interleave: 0.0025" PolyethyleneSide 1: Uncured Silicone RubberCarrier: 0.005" Release PETThis data represents typical values for the production material and should not be use.. |
|||
Thickness | 1520 microns | 60.0 mil | Overall; Arlon SQA-TMS-003 |
Arlon 32400N060 0.060" (1.52 mm) Uncured Silicone Rubber Design/Construction: Interleave 1: PET carrierSide 1: Uncured Silicone RubberInterleave 2 : PE carrierAppearance: Translucent silicone rubber on polymer linerThis data represents typical values for .. |
|||
Thickness | 1520 microns | 60.0 mil | Side 1; Arlon SQA-TMS-003 |
Arlon R37503G060 0.060" Uncured Fluorosilicone on Release PET Carrier Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured FluorosiliconeCarrier: 0.005" Release PETThis data represents typical values for the production material and should not be used .. |