- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 38 g/10 min
Polymer Property : Melt Flow = 38 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D 1238 |
| SABIC Innovative Plastics Geloy XTWE480 ASA (Asia Pacific) Anti-scratch Geloy grade with excellent weatherability, high flow, and good surface quality. XTWE480 is available in various colours.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
| Melt Flow | 38 - 50 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 - 50 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1283/L |
| NIZHNEKAMSKNEFTEKHIM PP 8348S (EPH31RA) Propylene and Ethylene Block Polymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r.. |
|||
| Melt Flow | 38 g/10 min | 38 g/10 min | Condition G |
| Ineos Nova 3900 General Purpose Crystal Polystyrene
(discontinued **) High flow, Good compoundingApplications: Color concentrates, Compounding, Thin wall moldingsExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the physical and o.. |
|||
| Melt Flow | 38 - 46 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 - 46 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238/L |
| NIZHNEKAMSKNEFTEKHIM PP 4340S (EP2H49G) Propylene and Ethylene Copolymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r.. |
|||
| Melt Flow | 38 - 50 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 - 50 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1283/L |
| NIZHNEKAMSKNEFTEKHIM PP 8340S (EPYH31U) Propylene and Ethylene Block Polymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r.. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Ineos H38G-01 Polypropylene Homopolymer, Fiber Grade
(discontinued **) Suggested fabrication methods: Fiber spinningFeatures: Very high speed spinning, Low gas fadeTypical applications: Spunbound fabricsComplies with FDA specification, Title 21, CFR 177.1520.Typical pr.. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| M. Holland Company PP720 Polypropylene Homopolymer Gas-fading resistantHomopolymerGood processabilityGood UV resistanceApplications: FabricsSpunbond non-wovensYarn |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| LG Chemical LUPOL HF5157Z PP+Rubber+MF, High Flow and Stiffness, High Impact Description: Injection Molding, PP+Rubber+MF, High Flow and Stiffness, High Impact, Good PaintabilityApplication: Automotive Exterior (Slim wall Bumper Fascia)Information provided by LG Chemical |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
| Ineos ABS Lustran® ABS 250 Injection Molding Grade Lustran® ABS 250 has standard impact strength, high flow, and is injection molding grade. |
|||
| Melt Flow | 38 g/10 min @Load 1.20 kg, Temperature 300 °C |
38 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| LG Chemical LUPOY RF3208F PC, Halogen Free Flame Retardance Description: Injection Molding, PC, Halogen Free Flame Retardance, Light Reflectance, White Color OnlyApplication: LCD Back Light Unit partsCAS: 103598-77-2 and 13463-67-1Information provided by LG .. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Ineos H38G-02 Polypropylene Homopolymer This is a polypropylene homopolymer for general purpose injection molding and high speed spinning applications. It is useful for spun bonded nonwovens and partially oriented yarn (POY). This mater.. |
|||
| Melt Flow | 38 g/10 min @Load 5.00 kg, Temperature 260 °C |
38 g/10 min @Load 11.0 lb, Temperature 500 °F |
Estimated using room temperature density; ISO 1133 |
| Lanxess Durethan® DP 1801/30 H3.0 000000 Nylon 6, 30% Milled Glass Fiber PA 6, injection molding grade, 30% milled fibers, UL 94V-2 at 0.8 mm, max. temperature in glow wire test: 960 °C at 0,75 mm, "halogen-free", good heat-ageing resistanceApplication Examples: Medic.. |
|||
| Melt Flow | 38 g/10 min @Load 5.00 kg, Temperature 260 °C |
38 g/10 min @Load 11.0 lb, Temperature 500 °F |
Calculated from MVR using melt density; ISO 1133 |
| Lanxess Pocan® T 7331 000000 PBT + PET, 30% Glass Fiber PBT+PET, 30% glass fibers, injection molding, improved surface finish, increased temperature peak load |
|||
| Melt Flow | 38 g/10 min | 38 g/10 min | ASTM D1238 |
| LyondellBasell Petrothene® NA870252 Low Density Polyethylene ApplicationsPETROTHENE NA 870-252 exhibits an excellent balance of toughness and softness, with excellent dimensional stability. Typical applications include caps and closures, housewares, toys, co.. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| LG Chemical LUPOL HF5157 PP+Rubber+MF, High Flow and Stiffness, High Impact Description: Injection Molding, PP+Rubber+MF, High Flow and Stiffness, High Impact, Good Weatherability, Scratch ResistanceApplication: Automotive Exterior (Slim wall Bumper Fascia)Information provi.. |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
| Styrolution Novodur® 250 ABS Novodur 250 is an injection molding grade of ABS with standard impact strength, high flow and high gloss.Information provided by Styrolution |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
| Samsung Cheil Industries Infino® NE-1050 PC/ABS, Unreinforced FR Information provided by Samsung Cheil Industries. |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 250 °C |
38 g/10 min @Load 22.0 lb, Temperature 482 °F |
ASTM D1238 |
| Samsung Cheil Industries Infino® HN-1064 PC, Unreinforced FR PC material that is applied to other resin for mobile phone chargersInformation provided by Samsung Cheil Industries. |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
| Samsung Cheil Industries Infino® NE-1050 PC/ABS, Unreinforced FR Information provided by Samsung Cheil Industries. |
|||
| Melt Flow | 38 g/10 min @Load 5.00 kg, Temperature 240 °C |
38 g/10 min @Load 11.0 lb, Temperature 464 °F |
estimated from MVR using room temperature density; ISO 1133 |
| Covestro Bayblend® FR 3006 Polycarbonate + ABS, Flame Retardant Grade Injection molding gradehigh heat resistanceVicat/B 120 = 110 °Ceasy flowUL-listing 94 V-1 at 1.5 mm and V-0 at 2.0 mmPreprocessingMax. Water content |
|||
| Melt Flow | 38 g/10 min @Temperature 230 °C |
38 g/10 min @Temperature 446 °F |
ASTM D1238 |
| Dow 5D49 Polypropylene Resin DOW 5D49 is intended for use fiber spinning processes. It is well suited for spunbond non-woven applications.Information provided by DowDow Announced Sale of Global Polypropylene Business to Braske.. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM-D1238 |
| Braskem H 125 HOMO Polypropylene Homopolymer H 125 is a high melt flow rate homopolymer designed for nonwoven by spunbonded processing. It is used in fiber extrusion processing. This resin features excellent processing, allowing increased line.. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Braskem MV-501 Impact Copolymer Polypropylene Description: Long term heat stability, nucleated, excellent processability.Applications: Suggested uses include compounding, thin-walled injection molding.Process: Injection Molding.This resin meets.. |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D-1238 |
| Bhansali Engineering Abstron AN480V2 Flame Retardant ABS Grade Information provided by Bhansali |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D-1238 |
| Bhansali Engineering Abstron MIF-35 ABS Injection Molding Grade High Impact, Medium, High Flow, General PurposeInformation provided by Bhansali |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Carmel Olefins CAPILENE® QU 73 AV Propylene Random Copolymer Description: CAPILENE® QU 73 AV is a high melt flow rate, controlled rheology polypropylene random copolymer for injection molding of clear articles. CAPILENE® QU 73 AV is clarified with antista.. |
|||
| Melt Flow | 38 g/10 min @Load 10.0 kg, Temperature 220 °C |
38 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D-1238 |
| Bhansali Engineering Abstron AN480V2 Flame Retardant ABS Grade Information provided by Bhansali |
|||
| Melt Flow | 38 g/10 min @Load 5.00 kg, Temperature 190 °C |
38 g/10 min @Load 11.0 lb, Temperature 374 °F |
|
| Total Finaprene® 602 Styrene-Butadiene TPE Copolymer Compound, Formulated to 62 Shore A
(discontinued **) Styrene-Butadiene CopolymerDescription: Finaprene® 602 is a thermoplastic elastomer type radial styrene-butadiene block copolymer. Thanks to its broad molecular weight distribution, Finaprene® 60.. |
|||
| Melt Flow | 38 g/10 min @Load 2.16 kg, Temperature 230 °C |
38 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Ineos H38K-00 Polypropylene Homopolymer, Fiber Grade
(discontinued **) Suggested fabrication methods: Fiber spinningFeatures: Very high speed spinning, Low gas fade, Low smokeTypical applications: Spunbound fabricsComplies with FDA specification, Title 21, CFR 177.1520.. |
|||
Copyright © lookpolymers.com All Rights Reserved