Physical Properties | Metric | English | Comments |
---|---|---|---|
Viscosity | 250000 cP @Temperature 25.0 °C |
250000 cP @Temperature 77.0 °F |
Uncured |
Permabond LH050 Anaerobic Threadsealant Permabond® LH050 pipe sealant with PTFE is a general purpose pipe sealant that provides instant air pressure seal up to 1000 psi with limited hand tightening. After cure, the sealing capability is .. |
|||
Viscosity | 250000 cP | 250000 cP | Part A, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4305 Metal Bonding Methacrylate Adhesive Resinlab™ AR 4305 is a 1:1 mix methacrylate-based structural adhesive designed for general purpose bonding of a wide variety of materials in industrial applications. AR 4305 forms tough, durable bo.. |
|||
Viscosity | 250000 cP | 250000 cP | Spindle TD, 2.5 rpm; Curing |
Resinlab® AR 4305 Metal Bonding Methacrylate Adhesive Resinlab™ AR 4305 is a 1:1 mix methacrylate-based structural adhesive designed for general purpose bonding of a wide variety of materials in industrial applications. AR 4305 forms tough, durable bo.. |
|||
Viscosity | 250000 cP | 250000 cP | RVT, #7, 2.5 rpm; TM R050-12 |
Resinlab® EP1325LV Thixotropic, Heat Curing Epoxy Adhesive Resinlab™ EP1325 and EP1325LV are one part thixotropic, heat curing epoxy adhesives. They can also be used as a small mass potting compounds, staking or damming adhesives, or polymer systems where .. |
|||
Viscosity | 250000 - 350000 cP @Temperature 400 - 400 °C |
250000 - 350000 cP @Temperature 752 - 752 °F |
Average value: 300000 cP Grade Count:2 |
Overview of materials for Polyetheretherketone, PTFE Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetheretherketone, PTFE Filled". Each property range of values reported is minimum and maximum values.. |
|||
Viscosity | 250000 cP @Temperature 400 °C |
250000 cP @Temperature 752 °F |
melt; ISO 11443 |
Victrex® PEEK 150FW30 PEEK, 30% Carbon Fibre/PTFE Reinforced Product Description:High performance thermoplastic material, 30% reinforced with carbon fibre / PTFE Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA fo.. |
|||
Viscosity | 250000 cP @Temperature 400 °C |
250000 cP @Temperature 752 °F |
melt; ISO 11443 |
Victrex® PEEK 90CA30 Polyetheretherketone, 30% Carbon Fibre Reinforced Product Description:High performance thermoplastic material, 30% carbon fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food cont.. |
|||
Viscosity | 250000 - 500000 cP @Temperature 25.0 °C |
250000 - 500000 cP @Temperature 77.0 °F |
Uncured |
Permabond ES569 Epoxy Resin PERMABOND® ES569 is a single-part heat cured epoxy adhesive with excellent adhesion to metal surfaces as well as composite materials. The high bond strength of this adhesive allows it to replace me.. |
|||
Viscosity | 250000 cP | 250000 cP | Part A, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4305 HP Metal Bonding Methacrylate Adhesive Resinlab™ AR 4305 HP is a 1:1 mix methacrylate-based structural adhesive designed for general purpose bonding of a wide variety of materials in industrial applications. AR 4305 HP forms tough, dur.. |
|||
Viscosity | 250000 cP | 250000 cP | Part A, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4305 White Metal Bonding Methacrylate Adhesive Resinlab™ AR 4305 White is a 1:1 mix methacrylate-based structural adhesive designed for general purpose bonding of a wide variety of materials in industrial applications. AR 4305 White forms tough.. |
|||
Viscosity | 250000 cP | 250000 cP | Part B, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4305 White Metal Bonding Methacrylate Adhesive Resinlab™ AR 4305 White is a 1:1 mix methacrylate-based structural adhesive designed for general purpose bonding of a wide variety of materials in industrial applications. AR 4305 White forms tough.. |
|||
Viscosity | 250000 cP | 250000 cP | Part A, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4315 HP Metal Bonding Methacrylate Adhesive Resinlab™ AR 4315 HP is a 1:1 mix methacrylate-based structural adhesive formulated to bond almost all engineered thermoplastics, thermosets, composites, and metal structural elements together in a.. |
|||
Viscosity | 250000 cP | 250000 cP | Part A, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4315 Metal Bonding Methacrylate Adhesive Resinlab™ AR 4315 is a 1:1 mix methacrylate-based structural adhesive formulated to bond almost all engineered thermoplastics, thermosets, composites, and metal structural elements together in any .. |
|||
Viscosity | 250000 cP | 250000 cP | Part B, Spindle TD, 2.5 rpm; Uncured |
Resinlab® AR 4315 Metal Bonding Methacrylate Adhesive Resinlab™ AR 4315 is a 1:1 mix methacrylate-based structural adhesive formulated to bond almost all engineered thermoplastics, thermosets, composites, and metal structural elements together in any .. |
|||
Viscosity | 250000 cP | 250000 cP | Spindle TD, 2.5 rpm; Curing |
Resinlab® AR 4340 HP Metal Bonding Methacrylate Adhesive Resinlab™ AR 4340 HP is a 1:1 mix methacrylate-based structural adhesive designed for general purpose bonding of a wide variety of materials in industrial applications. It is an accelerated version.. |
|||
Viscosity | 250000 cP | 250000 cP | Melt Viscosity, 280°C, 1500 sec-1; ISO 11443 |
SABIC Innovative Plastics NORYL PX9406K PPE+HIPS (Asia Pacific) NORYL* PX9406K resin may be suitable for consumer electronics applications. Flame retardant used is non-halogenated. UL94 V0 at 1.5 mm, 5VB at 2 mm, and 5VA at 2.5 mm. RTI (impact) = 105 C |
|||
Viscosity | 250000 cP | 250000 cP | B |
Shin-Etsu Silicones LIMSâ„¢ KE1950-30A/B Elastomer KE-1950-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. It's viscosity is low enough to allow easy .. |
|||
Viscosity | 250000 cP @Temperature 25.0 °C |
250000 cP @Temperature 77.0 °F |
Dynamic |
Struktol POLYDIS 3615 Elastomer modified epoxy prepolymer Applications: STRUKTOL VP 3615 is used where conventional epoxy systems and prepolymers are unable to satisfy the demands of for example impact, flexural and peel strength. Contrary to PD 3614 the T.. |
|||
Viscosity | >= 250000 cP @Temperature 23.0 °C |
>= 250000 cP @Temperature 73.4 °F |
|
Master Bond Supreme 10HTF Fast Curing Toughened One Component Epoxy Adhesive Master Bond Polymer System Supreme 10HTF is a one part, no-mix system featuring a unique combination of properties including high shear and peel strength, exceptionally wide service temperature rang.. |
|||
Viscosity | 250000 cP | 250000 cP | Mixed |
Tra-Con Tra-Bond 226U01 High Temperature Controlled Flow Adhesive TRA-BOND 226U01 is a one-part, controlled flow adhesive with high temperature resistance.Information provided by Tra-Con Inc. |
|||
Viscosity | 250000 cP @Temperature 180 °C |
250000 cP @Temperature 356 °F |
Melt; Flowtester (100 kgf/cm², dimension of die 1 Φ mm x 10 mm) |
Zeon Chemicals Quintac® 3460 SIS Block Polymer Styrene Isoprene (SIS) Block Polymer. Suitable for HMAInformation provided by Zeon Chemicals L.P. |
|||
Viscosity | 250000 cP | 250000 cP | Haake cone and plate rheometer @ 5/sec (35mm/2° cone) |
Loctite® 3532 High viscosity Dam Encapsulant COB/DCA Encapsulants are essential to the reliability of flip chip assemblies because they minimize the thermal mismatch between the flip chip and substrate.Loctite® Underfills and Encapsulants imp.. |
|||
Viscosity | 250000 - 450000 cP | 250000 - 450000 cP | Dynamic |
Dow Corning 9546 Silicone Elastomer Blend A mixture of high molecular weight silicone elastomers (dimethicone crosspolymer) in cyclopentasiloxane and a high molecular weight linear silicone polymer for use in skincare, suncare, shower gel, .. |
|||
Viscosity | 250000 cP @Shear Rate 1000 1/s, Temperature 260 °C |
250000 cP @Shear Rate 1000 1/s, Temperature 500 °F |
|
DSM Akulon® F127 PA6 Low/Medium Viscosity, Film Extrusion |
|||
Viscosity | 250000 cP @Shear Rate 1000 1/s, Temperature 260 °C |
250000 cP @Shear Rate 1000 1/s, Temperature 500 °F |
|
DSM Akulon® XP36-C1 PA6 Film Extrusion, Medium Viscosity, Lubricated |
|||
Viscosity | 250000 cP @Temperature 160 °C |
250000 cP @Temperature 320 °F |
2.16 kg load; ISO 1133 |
EMS-Griltech Griltex® D 1531E Copolyester Hotmelt Adhesive (Technical Applications) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
Viscosity | 250000 - 400000 cP @Temperature 23.0 °C |
250000 - 400000 cP @Temperature 73.4 °F |
1 rpm |
Epoxy Technology EPO-TEK® H55 Epoxy Material Description: A two component, thixotropic and high temperature epoxy designed to be used for hybrids and PCB applications.Information Provided by Epoxy Technology |
|||
Viscosity | 250000 - 300000 cP @Temperature 23.0 °C |
250000 - 300000 cP @Temperature 73.4 °F |
0.5 rpm |
Epoxy Technology EPO-TEK® H81A Epoxy Material Description: A two component, gold-filled, electrically and thermally conductive epoxy designed for hybrid microelectronic and semiconductor packaging.Information Provided by Epoxy Technolo.. |
|||
Viscosity | 250000 cP @Shear Rate 1000 1/s, Temperature 240 °C |
250000 cP @Shear Rate 1000 1/s, Temperature 464 °F |
|
DSM Akulon® F128 PA6 Film Extrusion, Medium Viscosity |
|||
Viscosity | 250000 cP @Shear Rate 1000 1/s, Temperature 260 °C |
250000 cP @Shear Rate 1000 1/s, Temperature 500 °F |
|
DSM Akulon® XP36-E1 PA6 Film Extrusion, Medium Viscosity, Nucleated, Lubricated |