Polymer Property : Density = 0.938 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	0.938 - 0.942 g/cc	0.0339 - 0.0340 lb/in³	Base Resin; ASTM D1505
NIZHNEKAMSKNEFTEKHIM PE 4441R (40404) Medium Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Density	0.938 g/cc	0.0339 lb/in³	ASTM D792
NOVA Chemicals Novapol® TF-0338-E Hexene LMDPE Film Resin Excellent stiffness and glossApplications: Diaper back sheet, BlendingAdditives: High temperature AOFilm properties are typical of film extruded at 280°C.Information provided by NOVA Chemicals.
Density	0.938 g/cc	0.0339 lb/in³	ASTM D 792
NOVA Chemicals Novapol® TF-0438-E Hexene LMDPE Film Resin TF-0438-E complies with the U.S. FDA specifications for olefin polymers and may be used in the U.S. as an article or component of an article intended for use in contact with food, without temperatur..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D792
NOVA Chemicals Novapol® TI-0338-A MDPE Masterbatch Resin Molded Plaque Properties. Features: Hexene Copolymer, excellent impact strength, excellent ESCR.Applications: large parts, agricultural storage tanks.Data provided by the manufacturer.
Density	0.938 g/cc	0.0339 lb/in³	ASTM D4883
ExxonMobil LL 8401 Rotational Molding Resin (discontinued **) LL 8401 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for Non-UV applications that require optimum balance of flow processabil..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D1505
Formosa Plastics Formolene® L43840U Rotational Molding LLDPE (discontinued **) Butene CopolymerApplications: Toys and other non-tank rotational molding applications.Formolene L43840U is a Butene Copolymer of linear low density polyethylene for toys and other non-tank rotationa..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D792
NOVA Chemicals Novapol® TR-0338-UI Hexene MDPE Rotational Molding Resin Excellent low temperature impact properties, Excellent ESCR, Good stiffness, Wide processing windowApplications: General purpose custom molding, Chemical containers, IBCs, Fish boxes, Septic tanks, ..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D792
NOVA Chemicals Novapol® TR-0338-UIG Hexene MDPE Rotational Molding Resin Excellent low temperature impact properties, Excellent ESCR, Good stiffness, Wide processing windowApplications: General purpose custom molding, Chemical containers, IBCs, Fish boxes, Septic tanks, ..
Density	0.938 g/cc	0.0339 lb/in³	Exxon Method
ExxonMobil Escorene® LL-8461 LMDPE Rotational Molding Grade (discontinued **) Data provided by the manufacturer, Exxon Chemical.LL-8400 series are linear medium density polyethylene resins that provide outstanding environmental stress crack resistance. LL-8461 is fully formu..
Density	0.938 g/cc	0.0339 lb/in³	Melt Density
BASF Capron® 1943 Impact Modified Nylon 6 (Dry) (discontinued **) Capron 1943 is a type 6 nylon graft copolymer developed for injection molding applications requiring improved dry as molded toughness, and increased flexibility. It has an excellent thermal and che..
Density	0.938 g/cc	0.0339 lb/inÂ³
LyondellBasell LupolenÂ® 3821 D MDPE Data was collected by ISO methods and originally provided by BASF. The LupolenÂ® product line is now produced by Basell.
Density	0.938 g/cc	0.0339 lb/inÂ³
LyondellBasell LupolenÂ® 3822 D GB 00350 MDPE Data was collected by ISO methods and originally provided by BASF. The LupolenÂ® product line is now produced by Basell.
Density	0.938 g/cc	0.0339 lb/inÂ³	ASTM D1505
ICO Polymers ICORENEâ„¢ 115-1653 LMDPE Rotational Molding Resin Description: ICORENE 115-1653 polyethylene developed for use in rotational molding. It is an easy processing material with good surface gloss, scratch resistance and generally balanced physical pro..
Density	0.938 g/cc	0.0339 lb/inÂ³	ASTM D792
Micropol Microlin ML90 Linear Polyethylene Rotational Molding Powder Information provided by Micropol Limited
Density	0.938 g/cc	0.0339 lb/inÂ³	ASTM 1505-68
Iran Petrochemical (PCC) 3840 UA Medium Density Polyethylene MD3840UA is a linear medium density polyethylene (MDPE) with butene copolymer. This polymer has good impact strength, excellent external and internal surface finish, whiteness, good stress cracking ..
Density	0.938 g/cc	0.0339 lb/inÂ³	ISO 1872/1
SIDPEC EGYPTENEÂ® HD 3840 EA MDPE Wire and Cable Grade Applications:Suitable for the production of silane cross-linkable compoundsLow voltage power cable insulationInjection molded technical parts and closureInformation provided by Interchim s.r.l., off..
Density	0.938 g/cc	0.0339 lb/inÂ³	ISO 1872/1
SIDPEC EGYPTENEÂ® HD 3840 UA MDPE Rotational Molding Applications:Rotational items: tanks, containers, etc...Injection molded technical parts and closureInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (S..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D1505
Formosa Plastics Formolene® HL3812 Film (Hexene) HDPE Medium Density Polyethylene Formolene® HL3812 is a high molecular weight hexene copolymer resin that is tailored specifically for geomembrane applications. The resin provides an excellent balance o..
Density	0.938 g/cc	0.0339 lb/in³	ExxonMobil method
ExxonMobil LLDPE LLP 8460.29 Linear Low Density Polyethylene Resin Product Description: LL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance o..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D4883
ExxonMobil LLP8460.29 Rotational Molding Resin Product Description: LL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance o..
Density	0.938 g/cc	0.0339 lb/in³
Dow Primacor® 3460 Ethylene Acrylic Acid (EAA) PRIMACOR® 3460 polymer containing 9.5% comonomer is a heat seal coating for high speed packaging applications where low temperature processing is necessary for minimal taste and odor effects. It is..
Density	0.938 g/cc	0.0339 lb/in³
Dow Primacor® 1410 Ethylene Acrylic Acid (EAA) Film properties below based on a film thickness of 60 µm. Data provided by Dow Chemical.
Density	0.938 g/cc	0.0339 lb/in³
Dow Primacor® 1420 Ethylene Acrylic Acid (EAA) Film properties below based on a film thickness of 60 µm. Data provided by Dow Chemical.
Density	0.938 g/cc	0.0339 lb/in³
Dow Primacor® 3440 Ethylene Acrylic Acid (EAA) PRIMACOR® 3440 polymer containing 9.5% comonomer is an extrusion/ coextrusion coating and laminating for flexible packaging applications. It is designed to provide excellent hot tack and adhesion t..
Density	0.938 g/cc	0.0339 lb/in³	Melt Density
BASF Capron® BG50XFI Impact Modified Nylon 6 (Dry) (discontinued **) Capron BG50XFI is an injection molding type 6 nylon graft copolymer with superior impact resistance and flow especially for thinner walled parts and long flow lengths. It is also available in natura..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D1505
PolyOne Syncure™ S1027A Polyethylene, Crosslinked (XLPE) Moisture Crosslinkable Polyethylene Compound. Available as Base Resin component for PolyOne Syncure System.Tensile, Oven Aging, measured on a 100 phr S1027A / 20 phr V0022G system. Deformation, Hot ..
Density	0.938 g/cc	0.0339 lb/in³	ASTM D4883
ExxonMobil LL 8460 Rotational Molding Resin (discontinued **) LL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require optimum balance of stiffness, processabili..
Density	0.938 - 2.56 g/cc	0.0339 - 0.0925 lb/in³	Average value: 1.15 g/cc Grade Count:281
Overview of materials for Nylon 6, Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Impact Grade". Each property range of values reported is minimum and maximum values of appropri..