Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Rogers Corporation RO4003C Glass-Reinforced Hydrocarbon and Ceramic Laminate with Thin Film Resistor Foil RO4000® Series High Frequency Circuit Materials are glass-reinforced hydrocarbon and ceramic (not PTFE) laminates with TICER™ TCR® Thin Film Resistor Foils. These laminates are designed for perf.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Natural Color
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 51240 PET, Pellet, Injection Molded, Blue
(discontinued **) PLENCO 51240 is an engineering grade glass reinforced flame retarded recycled polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed.Information supplied by P.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 51240 PET, Pellet, Injection Molded, Natural Color
(discontinued **) PLENCO 51240 is an engineering grade glass reinforced flame retarded recycled polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed.Information supplied by P.. |
|||
Density | 1.79 g/cc @Temperature 25.0 °C |
0.0647 lb/in³ @Temperature 77.0 °F |
|
Solvay Specialty Polymers Galden® HT200 PFPE Heat Transfer Fluid Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Techmer ES HiFill® TPX-PVDF-03009 C Availability: North AmericaForms: PelletsFiller/Reinforcement: Mineral FillerFeatures: Low Shrinkage and Low Smoke EmissionInformation provided by TP Composites, Inc. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA6/6 GF70 HS L BK 70% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 70% Filler by WeightAdditive: Lubricant and Heat StabilizerFeatures: Lubricated and Heat StabilizedUL File N.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America 52-40-40-P Long-Glass Reinforced Diallyl Phthalate Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Meets the requirements of ASTM D5948 Type GDI-30F.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Cosmic Plastics 6220F Short Glass Fiber Filled Iso Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G30-700 24K HTA-7D F402 Continuous Filament Carbon Fiber Standard Modulus; Wide Band; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho Carb.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 12K IMA5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 24K IMA5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 6K IMA-5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | Fibre |
Hexcel® HexPly® M48 180°C/356°F Curing Epoxy Matrix, M48/35%/150/IM7 GS Fiber: IM7 GS, UD, 150 g/m2Information provided by HexCel |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | Fibre |
Hexcel® HexPly® M56 180°C (350°F) Out-of-Autoclave Curing Matrix, M56/35%/UD134/AS7-12K Fiber: AS7, Weave: UD, 134 g/m2Information provided by HexCel |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® HexTow™ AS7 Carbon Fiber HexTow™ AS7 carbon fiber is a continuous, high strength, high strain, PAN based fiber available, in a 12,000 (12K) filament count tow. This fiber has been surface treated and can be sized to improv.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® HexTow™ PV42/850 Carbon Fiber HexTow™ PV42/850 (HS-CP-3300) carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been designed for a.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® IM8 Carbon Fiber (12,000 Filaments) Weight/length = 0.446 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (12,000 Filaments) Weight/length = 0.858 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (3000 Filaments) Weight/length = 0.210 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (6000 Filaments) Weight/length = 0.427 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 - 1.83 g/cc | 0.0647 - 0.0661 lb/in³ | ISO R 1183 |
Fainplast Compounds CRA 90 Flexible PVC, Flame Retardant Electrical Bedding Flame retardant bedding |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | Fibre |
Hexcel® HexPly® M56 180°C (350°F) Out-of-Autoclave Curing Matrix, M56/37%/280H5/AS4-3K Fiber: AS, Weave: 5HS, 280 g/m2Information provided by HexCel |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® HexTow™ AS4D Carbon Fiber HexTow™ AS4D carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. The fiber has been surface treated and can be sized to improve .. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Green
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP KONDUIT PX11313 PA 6 (Europe-Africa-Middle East) Thermally conductive mineral and glass fiber filled PA6, FR, compliant with ECO protocols, non-brominated, non-chlorinated |
|||
Density | 1.79 - 1.89 g/cc | 0.0647 - 0.0683 lb/in³ | Molded |
Bulk Molding Compounds BMC T15(GPT) General Purpose Molding Compound BMC T15(GPT) is a high strength, low shrink general purpose molding compound. Due to the excellent flow and controlled reactivity, BMC T15(GPT) is well suited for injection, transfer or compression.. |