Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE D 4210 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE D 5010 Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | |
Polygon Polylube™ Fiber Series Epoxy Composite Bearings Low friction coupled with high load carrying capacity are natural benefits. Teflon® superfilaments, which exhibit tensile strength twenty times greater than PTFE resins are integrated into the bea.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | |
Meilian Chemical PE12077 WHITE MASTERBATCH WHITE PE12077 is a LDPE based masterbatch containing high-quality TiO2 without any addition of filler or fluorescence whitener. It is designed for use in economy films for general purpose, especiall.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D572 |
Haysite ETS Glass Reinforced Polyester Sheet, Electrical Grade (GPO1) A NEMA GPO-1 economy grade fiberglass mat reinforced thermoset polyester molded sheet. ETS is an IEEE Class B 130ºC electrical/160ºC mechanical material with good punching characteristics. Typ.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D572 |
Haysite HCR-100 Corrosion Resistant Polyester/Glass Sheet A general purpose isophthalic polyester sheet with flame retardants and ultraviolet inhibitors. Standard color is gray. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | |
LATI Larton CE/60 PPS, 60% Mineral Reinforced Polyphenylene Sulfide (PPS) based compound. Mineral filler. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.Availability: Africa & Middle East; .. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D891 |
Solvay Specialty Polymers FOMBLIN® LC55 PFPE Lubricant FOMBLIN LC perfluoropolyether fluids have the following unique features: excellent wear characteristics; very good low temperature properties; cost-effective; and outstanding for applications requir.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D891 |
Solvay Specialty Polymers FOMBLIN® M100 PFPE Lubricant Fomblin® PFPE fluorinated lubricants are used when harsh chemical environments, high temperatures or wide working-temperature ranges are encountered.Information provided by Solvay Solexis, Inc. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D891 |
Solvay Specialty Polymers FOMBLIN® Y04 PFPE Lubricant FOMBLIN Y perfluoropolyether fluids have the following unique features; excellent high temperature stability; good low temperature properties; very good E.P. and wear characteristics; good evaporati.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Techmer ES HiFill® ECTFE GF25 25% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 25% Filler by WeightFeatures: CopolymerAppearance: Natural ColorInformation provided by TP Composites, Inc. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP UFW49RS PPA (Europe-Africa-Middle East) LNP* Thermocomp* UFW49RS is a compound based on Polyphthalamide resin containing Glass Fiber, Mineral. Added features of this material include: Heat Stabilized. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP UFW49RSC PPA (Europe-Africa-Middle East) LNP* THERMOCOMP* UFW49RSC is a compound based on Polyphthalamide resin containing Glass Fiber, Mineral. Added features include: Heat Stabilized. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | Relative Density; ASTM D792 |
Sumitomo Bakelite North America RX® 1366FR-P Short-Glass Reinforced Diallyl Phthalate Short glass fiber reinforced, flame retardant, diallyl ortho-phthalate molding compound which meets the requirements of ASTM D5948 Type SDG-F.Information provided by Vyncolit, a Sumitomo Bak Group |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America RX® 3-1-525F-P Short-Glass Reinforced Diallyl Phthalate Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Meets the requirements of ASTM D5948 Type SDG-F.I.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP UFW49S PPA (Asia Pacific) LNP* Thermocomp* UFW49S is a compound based on Polyphthalamide resin containing Glass Fiber, Mineral. Added features of this material include: Heat Stabilized, Low Warpage. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Plenco 1500 Polyester, Granular, Transfer Molded PLENCO 01500 is a general purpose, mineral filled granular polyester molding compound, offering excellent arc and track resistance, and low post shrinkage characteristics. UL recognized under compon.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Plenco 1501 Polyester, Pellet, Injection Molded PLENCO 01501 is a general purpose, mineral filled granular polyester molding compound, offering excellent arc and track resistance properties, low post shrinkage, and improved mechanical strength va.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | |
Trelleborg Emerson & Cuming Eccobond® TP 50 Two-Component Low Temperature Performance Silicone Adhesive Emerson & Cuming TP 50 Eccobond® Two-Component Low Temperature Performance Silicone AdhesiveFilled, RTV silicone rubber, paste adhesive. Room temperature cure. Very flexible. Color coded for ease o.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | |
Hexcel® UHM Carbon Fiber (12,000 Filaments) Weight/length = 0.341 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | |
Hexcel® UHM Carbon Fiber (3000 Filaments) Weight/length = 0.085 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
DSM Stanyl® 46HF5041LW (DAM) Nylon 46 40% Glass Reinforced, Heat Stabilized, Flame Retardant, High Flow, Low Warpage (North America) Information provided by DSM Engineering Plastics. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | (DAM); ISO 1183 |
DSM Stanyl® 46HF5041LW Nylon 46-40% Glass Reinforced (European and Asian Grade) (Cond) Stanyl is a high performance polyamide providing unmatched performance and value across an amazingly broad range of automotive and electronic applications. Stanyl offers:Highest mechanical propertie.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
DSM Stanyl® 46HF5041LW Nylon 46-40% Glass Reinforced (European and Asian Grade) (Dry) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
DSM Stanyl® 46HF5050 (DAM) Nylon 46 50% Glass Reinforced, Heat Stabilized, Flame Retardant, High Flow (North America) Information provided by DSM Engineering Plastics. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
Applied Composites 185 Polyester SMC Industry Application: TransportationProduct Application: Lawn and GardenDistinct Features: Limited PigmentabilityInformation provided by Applied Composites Corporation. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D1475 |
Aptek 6505PMF Electronic-grade, non-conductive adhesive APTEK 6506-PMF is a one component, 100% solid, mineral-filled epoxy adhesive specifically designed for the attachment of electronic components to printed circuit boards as well as a protective barri.. |
|||
Density | 1.87 - 2.07 g/cc | 0.0676 - 0.0748 lb/in³ | Molded |
Bulk Molding Compounds BMC T10(14) General Purpose Molding Compound BMC T10(14) is a general purpose, low shrink molding compound. Due to the excellent flow and controlled reactivity, BMC T10(14) is well suited for injection, transfer or compression molding of intr.. |
|||
Density | 1.87 g/cc | 0.0676 lb/in³ | ISO 1183 |
Hexion Bakelite™ PF 4111 Phenolic Formaldehyde Resin, Improved Electrical Properties, Ammonia Free, Resistant to High Temperatures, Low Shrinkage, High Arc Resistance, UL Listed, Acetic Acid Free, Copper Adhesive Phenolic molding compound, inorganically filled, glass fiber reinforced, ammonia and acetic acid free, electrically high grade, high temperature stability, high mechanical strength, copper-adhesive,.. |
|||
Density | 1.87 - 2.07 g/cc | 0.0676 - 0.0748 lb/in³ | Molded |
Bulk Molding Compounds BMC T70 Automotive Grade Molding compound BMC T70 is a low profile automotive grade molding compound specifically formulated for the vacuum metallization process. These compounds have excellent physical properties as well as superior adhes.. |