Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.128 g/cc | 0.00462 lb/in³ | |
Pyrotek L-8 Fiberseal Blanket Lightweight, yet strong and durable needled blankets.Dimensions610 mm x 7.6 m1219 mm x 7.6 m6 - 51 mm thickApplicationsFurnace linings Gaskets Expansion joints Fire blanket Fire pillowsInformation p.. |
|||
Density | >= 0.128 g/cc | >= 0.00463 lb/in³ | |
Monmouth Rubber & Plastics Durafoamâ„¢ C42NBR Nitrile Rubber Information provided by Monmouth Rubber & Plastics Corp. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | |
Monmouth Rubber & Plastics Durafoamâ„¢ N231XS 100% Neoprene Information provided by Monmouth Rubber & Plastics Corp. |
|||
Density | 0.128 g/cc | 0.00462 lb/in³ | |
Sharadaa Ceramics And Bulk Fiber Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rota.. |
|||
Density | 0.128 g/cc | 0.00462 lb/in³ | |
Sharadaa Ceramics Blankets Services Offered: Retrofitting of Furnace, Installation of Castables/Bricks/Ceramic Fiber Modules, Castable Laying by Vibrocasting/Guiniting, Turnkey Installation Boiler/Chimney/Heater/Reformer/Rota.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | Folded |
Unifrax Anchor-Loc® 2200 Ceramic Fiber Modules The Anchor-Loc® module system is a family of ceramic fiber module products designed to meet a wide range of application requirements in a variety of heat processing vessels.Ceramic fiber modules us.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | Fibermax mat |
Unifrax Anchor-Loc® 3000 Ceramic Fiber Modules The Anchor-Loc® module system is a family of ceramic fiber module products designed to meet a wide range of application requirements in a variety of heat processing vessels.Ceramic fiber modules us.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | |
Unifrax Fibermax® Needled Blanket Fibermax® Needled Blankets are high temperature, light weight and flexible products manufactured from polycrystalline mullite fiber that can be exposed to temperatures up to 1600°C (2912°F). Fib.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | Installed Fired |
Unifrax Foamfrax® Isofoam Fiber Insulation Foamfrax® Insulation is a monolithic insulation system developed by Unifrax. Foamfrax Insulation is a three-component system of specially conditioned bulk ceramic or soluble fibers, an inorganic b.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | |
Unifrax FyreWrap® MAX 2.0 Duct Insulation Two-Layer ASTM E-2336 System Unifrax's FyreWrap® MAX 2.0 Duct Insulation is a high-temperature insulation blanket specifically designed to provide a flexible enclosure for one- and two-hour rated commercial kitchen grease duct.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | Module |
Unifrax Insulfrax® 1100C Modules Insulfrax® 1100C Modules are a family of high-temperature module products based on Unifrax's Anchor-Loc® attachment systems. Modules used in the Anchor-Loc® systems are constructed with Insulfra.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | |
Hexcel® HexWeb® HRH-78 - 1/8 - 8.0 Commercial Grade Nomex Honeycomb/Phenolic Resin Designation: Material-Cell Size (inches)-DensityHexWeb HRH-78 is manufactured from commercial grade aramid paper sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and after.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | |
Hexcel® HexWeb® HRP - 3/8 - 8.0 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
Density | 0.128 g/cc | 0.00462 lb/in³ | |
Zircar Refractory Composites ASPA-2 Alumina-Silica Fiber Paper ASPA-2 is a premium grade, lightweight refractory material made from high purity alumina-silica fibers formed into highly flexible sheets. This alumina-silica fiber paper exhibits very low thermal c.. |
|||
Density | 0.128 g/cc | 0.00463 lb/in³ | ASTM D1056 |
ACC Magnifoam™ MF1-8055™ MTI Silicones Silicone Foam Part of the Amber Chemical Group. Data provided by manufacturer. |