- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- Washington Penn PPH2UFO Polypropylene, Unfilled
Washington Penn PPH2UFO Polypropylene, Unfilled
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | Washington Penn |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Washington Penn PPH2UFO Polypropylene, Unfilled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Homopolymer for injection molding. Meets General Motors spec. GMP.PP.013Data provided by Washington Penn Plastic Co., Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.905 g/cc | 0.0327 lb/in³ | ASTM D792 |
| Melt Flow | 6.0 g/10 min | 6.0 g/10 min | Cond L; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 32.0 MPa | 4640 psi | ASTM D638 |
| Flexural Modulus | 1.40 GPa | 203 ksi | Tangent; ASTM D790 |
| Izod Impact, Notched | 0.300 J/cm @Thickness 3.17 mm |
0.562 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Gardner Impact | 2.30 J | 1.70 ft-lb | ASTM D3029 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 104 °C | 219 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | ASTM D648 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved