POLYMER SEARCH

Total HP 401 MDPE, pipe, cable, sheet

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Pipe Grade
Manufacturer	Total Atofina
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Total HP 401 MDPE, pipe, cable, sheet.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

FINATHENE® HP 401 is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® HP 401 is a black high density polyethylene specially developed for applications where excellent properties and high stiffness and creep resistance are required (e.g. sewage and drainage pipes, industrial pipes, sheet for chemical storage vessels,.)FINATHENE® HP 401 is a black high density polyethylene developed for cable sheathing applications and is designed to meet the requirements for communication power cables (medium and high voltage cable applications).Information provided provided by Total Petrochemicals.Total Petrochemicals acquired former Fina and Atofina plastics product lines.

Physical Properties	Metric	English	Comments
Density	0.955 g/cc	0.0345 lb/in³	ISO 1183
Environmental Stress Crack Resistance	>= 700 hour	>= 700 hour	ASTM D1693
Oxidative Induction Time (OIT)	>= 20 min	>= 20 min	210°C; EN 728
	>= 30 min	>= 30 min	200°C; EN 728
Carbon Black Loading	2.0 - 2.5 %	2.0 - 2.5 %	ISO 6964
Melt Flow	0.10 g/10 min @Load 2.16 kg	0.10 g/10 min @Load 4.76 lb	ISO 1133
	0.52 g/10 min @Load 5.00 kg	0.52 g/10 min @Load 11.0 lb	ISO 1133
High Load Melt Index	10 g/10 min @Load 21.6 kg	10 g/10 min @Load 47.6 lb	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	63	63	DIN 53505
Tensile Strength at Break	34.0 MPa	4930 psi	ISO 527
Tensile Strength, Yield	24.0 MPa	3480 psi	ISO 527
Elongation at Break	>= 700 %	>= 700 %	ISO 527
Elongation at Yield	9.0 %	9.0 %	ISO 527
Modulus of Elasticity	1.05 GPa	152 ksi	ISO 178
Flexural Modulus	1.00 GPa	145 ksi	ASTM D 790

Thermal Properties	Metric	English	Comments
Heat of Fusion	175 J/g	75.3 BTU/lb	DSC
CTE, linear	160 µm/m-°C @Temperature 20.0 °C	88.9 µin/in-°F @Temperature 68.0 °F
Specific Heat Capacity	2.00 J/g-°C	0.478 BTU/lb-°F	DSC
	2.60 J/g-°C @Temperature 150 °C	0.621 BTU/lb-°F @Temperature 302 °F	DSC
Thermal Conductivity	0.200 W/m-K @Temperature 150 °C	1.39 BTU-in/hr-ft²-°F @Temperature 302 °F	DIN 52612
Vicat Softening Point	127 °C	261 °F	ISO 306
Brittleness Temperature	-100 °C	-148 °F	ASTM D 746

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+16 ohm-cm	>= 1.00e+16 ohm-cm	IEC 93
Surface Resistance	>= 1.00e+16 ohm	>= 1.00e+16 ohm	IEC 93
Dielectric Constant	2.35 @Frequency 1000 Hz	2.35 @Frequency 1000 Hz	IEC 250
Dielectric Strength	17.0 kV/mm	432 kV/in	IEC 243
Dissipation Factor	0.00020 @Frequency 1000 Hz	0.00020 @Frequency 1000 Hz	IEC 250
	0.00030 @Frequency 1e+6 Hz	0.00030 @Frequency 1e+6 Hz	IEC 250

Users viewing this material also viewed the following: