Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Styrolution Novodur® H604 ABS

Category Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded
Manufacturer Styrolution
Trade Name Novodur®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Styrolution Novodur® H604 ABS.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Novodur H604 is a high heat injection molding grade with enhanced chemical resistance, especially suitable for being painted.Information provided by Styrolution
Physical Properties Metric English Comments
Density 1.04 g/cc
0.0376 lb/in³
ISO 1183
Linear Mold Shrinkage 0.0050 - 0.0070 cm/cm
0.0050 - 0.0070 in/in
ISO 294-4
Melt Flow 8.0 g/10 min

@Load 10.0 kg,
Temperature 220 °C
 8.0 g/10 min

@Load 22.0 lb,
Temperature 428 °F
 ISO 1133
Mechanical Properties Metric English Comments
Ball Indentation Hardness 105 MPa
15200 psi
ISO 2039-1
Tensile Strength, Yield 45.0 MPa
6530 psi
ISO 527
Elongation at Yield 2.6 %
2.6 %
ISO 527
Tensile Modulus 2.40 GPa
348 ksi
ISO 527
Flexural Strength 70.0 MPa
10200 psi
ISO 178
Flexural Modulus 2.40 GPa
348 ksi
ISO 178
Izod Impact, Notched (ISO) 12.0 kJ/m²

@Temperature -30.0 °C
 5.71 ft-lb/in²

@Temperature -22.0 °F
 ISO 180/A
21.0 kJ/m²

@Temperature 23.0 °C
 9.99 ft-lb/in²

@Temperature 73.4 °F
 ISO 180/A
Charpy Impact Unnotched 11.0 J/cm²

@Temperature -30.0 °C
 52.3 ft-lb/in²

@Temperature -22.0 °F
 ISO 179
18.0 J/cm²

@Temperature 23.0 °C
 85.7 ft-lb/in²

@Temperature 73.4 °F
 ISO 179
Charpy Impact, Notched 1.10 J/cm²

@Temperature -30.0 °C
 5.23 ft-lb/in²

@Temperature -22.0 °F
 ISO 179
2.00 J/cm²

@Temperature 23.0 °C
 9.52 ft-lb/in²

@Temperature 73.4 °F
 ISO 179
Thermal Properties Metric English Comments
CTE, linear 80.0 µm/m-°C
44.4 µin/in-°F
ISO 11359
Deflection Temperature at 0.46 MPa (66 psi) 102 °C
216 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 98.0 °C
208 °F
ISO 75
Vicat Softening Point 102 °C

@Load 5.10 kg
 216 °F

@Load 11.2 lb
 50°C/h; ISO 306
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+15 ohm
>= 1.00e+15 ohm
IEC 60093
Dielectric Constant 3.0

@Frequency 100 Hz
 3.0

@Frequency 100 Hz
 IEC 60250
Dielectric Strength 31.0 kV/mm

@Thickness 1.50 mm
 787 kV/in

@Thickness 0.0591 in
 Short Time; IEC 60243-1
Dissipation Factor 0.0050

@Frequency 100 Hz
 0.0050

@Frequency 100 Hz
 IEC 60250
0.0090

@Frequency 1.00e+6 Hz
 0.0090

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 600 V
600 V
IEC 60112
Processing Properties Metric English Comments
Melt Temperature 220 - 260 °C
428 - 500 °F
ISO 294
Mold Temperature 70.0 °C
158 °F
ISO 294
Injection Velocity 240 mm/sec
9.45 in/sec
ISO 294
Drying Temperature 80.0 °C

@Time 7200 - 14400 sec
 176 °F

@Time 2.00 - 4.00 hour
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved