Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Solvay Technyl® A 216 V30 Nylon 66, 30% Glass Fiber, EH0

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled
Manufacturer Solvay
Trade Name Technyl®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Solvay Technyl® A 216 V30 Nylon 66, 30% Glass Fiber, EH0.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Polyamide PA66, reinforced with 30% of glass fiber, for injection molding.Technyl A 216 V30 is used in all sectors of industry, offering an excellent combination between thermal and mechanical properties. This grade is used in automotive industry, manufacture of components of electrical tools, and transport and building.This product is available in natural, black and in a wide range of standard colors. Glow wire test thick. 1,6 mm, IEC 695-2-1, is 650°C. Glow wire test thick. 3,2 mm, IEC 695-2-1, is 750°C. Glow wire test thick. 1,6 mm: no flame, IEC 695-2-1, is 650°C.Information provided by Rhodia; Rhodia has been acquired by Solvay.
Physical Properties Metric English Comments
Density 1.37 g/cc
0.0495 lb/in³
ISO 1183-A
Water Absorption 0.80 %
0.80 %
24 hours in water at 23°C; ISO 62.
Linear Mold Shrinkage 0.0050 cm/cm
0.0050 in/in
RHODIA-EP
Linear Mold Shrinkage, Transverse 0.0080 cm/cm
0.0080 in/in
RHODIA-EP
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 190 MPa
27600 psi
ISO 527
Tensile Strength, Yield 190 MPa
27600 psi
ISO 527
Elongation at Break 3.0 %
3.0 %
ISO 527
Tensile Modulus 10.0 GPa
1450 ksi
ISO 527
Flexural Yield Strength 260 MPa
37700 psi
ISO 178
Flexural Modulus 8.40 GPa
1220 ksi
ISO 178
Izod Impact Resistance 1.10 J/cm²
5.24 ft-lb/in²
ISO 180
Charpy Impact Unnotched 8.00 J/cm²
38.1 ft-lb/in²
ISO 179/EU-1993
Charpy Impact, Notched 1.20 J/cm²
5.71 ft-lb/in²
ISO 179/1EA-1993
Thermal Properties Metric English Comments
CTE, linear 25.0 µm/m-°C

@Temperature 23.0 - 85.0 °C
13.9 µin/in-°F

@Temperature 73.4 - 185 °F
ASTM E831
Melting Point 263 °C
505 °F
ISO 3146-C
Deflection Temperature at 1.8 MPa (264 psi) 255 °C
491 °F
ISO 75-2
Flammability, UL94 HB

@Thickness 1.60 mm
HB

@Thickness 0.0630 in
ISO 1210/UL 94
Oxygen Index 23 %
23 %
ISO 4589
Electrical Properties Metric English Comments
Electrical Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 93
Surface Resistance 6.00e+14 ohm
6.00e+14 ohm
IEC 93
Dielectric Constant 3.75

@Frequency 1e+6 Hz
3.75

@Frequency 1e+6 Hz
IEC 250
Dielectric Strength 40.0 kV/mm
1020 kV/in
IEC 243-1
Dissipation Factor 0.010

@Frequency 1e+6 Hz
0.010

@Frequency 1e+6 Hz
IEC 250
Comparative Tracking Index 600 V
600 V
IEC 112
Processing Properties Metric English Comments
Rear Barrel Temperature 260 - 270 °C
500 - 518 °F
Middle Barrel Temperature 270 - 280 °C
518 - 536 °F
Front Barrel Temperature 280 - 290 °C
536 - 554 °F
Nozzle Temperature 271 - 279 °C
520 - 535 °F
Melt Temperature 270 - 300 °C
518 - 572 °F
Mold Temperature 80.0 - 120 °C
176 - 248 °F
Surface
Drying Temperature 80.0 °C
176 °F
Dehumidifying Dryer
Dry Time 3 - 4 hour
3 - 4 hour
Moisture Content <= 0.20 %
<= 0.20 %
Back Pressure 0.138 - 0.345 MPa
20.0 - 50.0 psi
Fill Speed 200 - 300 mm/sec
7.87 - 11.8 in/sec
Peripheral Screw Speed
Descriptive Properties Value Comments
Injection Speed 120 - 170 cm3/sec
Copyright © lookpolymers.com All Rights Reserved