TorlonÂ® AI-30 LM is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation of aqueous solutions with the addition of an appropriate complexing amine. Aqueous-based solutions made with TorlonÂ® AI-30 LM have inherently low VOCs, which helps end users meet stringent environmental regulations. Coatings based on the TorlonÂ® AI-30 LM polymer yield durable, abrasion-resistant, thermally-stable films. The cured resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers.Aqueous-based AI-30 LM polymer coatings offer a sustainable solution for electrical/electronic, high temperature decorative and corrosion preventative applications. In addition, magnet wire insulation and protective coatings for printed circuit boards may be converted from solvent-borne (NMP) polyamide-imide solutions. Industrial applications include primers and decorative topcoats for cookware, appliances and housewares. Aqueous AI-30 LM polymer solutions may be easily combined with aqueous fluoropolymer dispersions to produce sustainable, high-performance, low-friction, corrosion-resistant coatings that provide protection to industrial and automotive parts.Features: Flame Retardant; Good Abrasion Resistance; Good Adhesion; Good Chemical Resistance; High Heat Resistance; Water SolubleUses: Binder; Coating ApplicationsAdditional Properties: Acid Number - 125.00 mg KOH/g; Molecular Weight - 3500 g/mol; Molecular Weight - 11000 g/mol; Solids Content - 35 %Information provided by Solvay Specialty Polymers.