Solvay Specialty Polymers Tecnoflon® FOR TF 636 Fluoroelastomer

TECNOFLON® FOR TF 636 is a medium-low viscosity cure incorporated fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® FOR TF 636 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers. Tecnoflon ® FOR TF 636 can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, molded shapes or other items requiring improved low temperature performance. Tecnoflon ® FOR TF 636 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers.Features: Good Chemical Resistance; Good Mold Release; High Flow; High Heat Resistance; Low Compression Set; Medium-low Viscosity; TerpolymerUses: Belts/Belt Repair; Blending; Diaphragms; Gaskets; Hose; Profiles; Seals; SheetAdditional Properties: Compound Tested - 6 %; Compound Tested - 3 %; Compound Tested - 30 %; Compound Tested - 100 %; Fluorine Content - Internal Method 66 %; MDR 6 min @ 177°C arc 0.5° - ASTM D6601 3.0 N·m; MDR 6 min @ 177°C arc 0.5° - ASTM D6601 0.16 N·m; MDR 6 min @ 177°C arc 0.5° - ASTM D6601 1.4 min; MDR 6 min @ 177°C arc 0.5° - ASTM D6601 2.1 min; MDR 6 min @ 177°C arc 0.5° - ASTM D6601 1.2 min; Mooney Scorch MS 135°C - ASTM D1646 28 MU; Mooney Scorch MS 135°C - ASTM D1646 24.0 min; ODR 12 min @ 177°C arc 3° - ASTM D2084 15 N·m; ODR 12 min @ 177°C arc 3° - ASTM D2084 1.5 N·m; ODR 12 min @ 177°C arc 3° - ASTM D2084 3.5 min; ODR 12 min @ 177°C arc 3° - ASTM D2084 2.0 min; Solubility - Ketones and esters; Temperature Retraction - ASTM D1329 -19 °C; Temperature Retraction - ASTM D1329 -14 °C; Temperature Retraction - ASTM D1329 -10 °CInformation provided by Solvay Specialty Polymers.